michaelh/zephyr
1
0
Fork 0
Code Releases Activity

drivers: can: mcp2515: Switch to new GPIO API

Browse source 
Mark the INT signal to be active low and use the new functions to get
gpio state and configure the gpio interrupt flanks.

Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
This commit is contained in:
Karsten Koenig 2019-11-07 20:16:06 +01:00 • committed by Carles Cufí
commit 4897c95462
3 changed files with 16 additions and 10 deletions
Download patch file Download diff file Expand all files Collapse all files

18
drivers/can/can_mcp2515.c
View file

@ -639,11 +639,10 @@ static void mcp2515_handle_interrupts(struct device *dev)
{
const struct mcp2515_config *dev_cfg = DEV_CFG(dev);
struct mcp2515_data *dev_data = DEV_DATA(dev);
u32_t pin;
int ret;
u8_t canintf;
/* Loop until INT pin is high (all interrupt flags handled) */
/* Loop until INT pin is inactive (all interrupt flags handled) */
while (1) {
ret = mcp2515_cmd_read_reg(dev, MCP2515_ADDR_CANINTF,
&canintf, 1);
@ -693,11 +692,11 @@ static void mcp2515_handle_interrupts(struct device *dev)
canintf, ~canintf);
}
/* Break from loop if INT pin is no longer low */
ret = gpio_pin_read(dev_data->int_gpio, dev_cfg->int_pin, &pin);
if (ret != 0) {
/* Break from loop if INT pin is inactive */
ret = gpio_pin_get(dev_data->int_gpio, dev_cfg->int_pin);
if (ret < 0) {
LOG_ERR("Couldn't read INT pin");
} else if (pin != 0) {
} else if (ret == 0) {
/* All interrupt flags handled */
break;
}
@ -790,8 +789,8 @@ static int mcp2515_init(struct device *dev)
}
if (gpio_pin_configure(dev_data->int_gpio, dev_cfg->int_pin,
(GPIO_DIR_IN | GPIO_INT | GPIO_INT_EDGE
| GPIO_INT_ACTIVE_LOW | GPIO_INT_DEBOUNCE))) {
(GPIO_INPUT |
DT_INST_0_MICROCHIP_MCP2515_INT_GPIOS_FLAGS))) {
LOG_ERR("Unable to configure GPIO pin %u", dev_cfg->int_pin);
return -EINVAL;
}
@ -803,7 +802,8 @@ static int mcp2515_init(struct device *dev)
return -EINVAL;
}
if (gpio_pin_enable_callback(dev_data->int_gpio, dev_cfg->int_pin)) {
if (gpio_pin_interrupt_configure(dev_data->int_gpio, dev_cfg->int_pin,
GPIO_INT_EDGE_TO_ACTIVE)) {
return -EINVAL;
}