drivers: serial: stm32: rework code for max re-use in wide data support

Restructuring code for poll_in/poll_out/fifo_fill/fifo_read because for
wide data support, all code is identical except the calls to
LL_USART_{ReceiveData8/TransmitData8}.
This allows both implementations, 8 and 9 bit data-width to call a
visitor function, passing the either the 8 bit or 9 bit data-width
function pointer.

Signed-off-by: Jeroen van Dooren <jeroen.van.dooren@nobleo.nl>
This commit is contained in:
Jeroen van Dooren 2023-02-06 09:49:27 +01:00 committed by Carles Cufí
commit 435d5d1a94

View file

@ -569,7 +569,11 @@ static int uart_stm32_config_get(const struct device *dev,
}
#endif /* CONFIG_UART_USE_RUNTIME_CONFIGURE */
static int uart_stm32_poll_in(const struct device *dev, unsigned char *c)
typedef void (*poll_in_fn)(
const struct uart_stm32_config *config,
void *in);
static int uart_stm32_poll_in_visitor(const struct device *dev, void *in, poll_in_fn get_fn)
{
const struct uart_stm32_config *config = dev->config;
@ -586,13 +590,15 @@ static int uart_stm32_poll_in(const struct device *dev, unsigned char *c)
return -1;
}
*c = (unsigned char)LL_USART_ReceiveData8(config->usart);
get_fn(config, in);
return 0;
}
static void uart_stm32_poll_out(const struct device *dev,
unsigned char c)
typedef void (*poll_out_fn)(
const struct uart_stm32_config *config, void *out);
static void uart_stm32_poll_out_visitor(const struct device *dev, void *out, poll_out_fn set_fn)
{
const struct uart_stm32_config *config = dev->config;
#ifdef CONFIG_PM
@ -635,10 +641,30 @@ static void uart_stm32_poll_out(const struct device *dev,
}
#endif /* CONFIG_PM */
LL_USART_TransmitData8(config->usart, (uint8_t)c);
set_fn(config, out);
irq_unlock(key);
}
static void uart_stm32_poll_in_u8(const struct uart_stm32_config *config, void *in)
{
*((unsigned char *)in) = (unsigned char)LL_USART_ReceiveData8(config->usart);
}
static void uart_stm32_poll_out_u8(const struct uart_stm32_config *config, void *out)
{
LL_USART_TransmitData8(config->usart, *((uint8_t *)out));
}
static int uart_stm32_poll_in(const struct device *dev, unsigned char *c)
{
return uart_stm32_poll_in_visitor(dev, (void *)c, uart_stm32_poll_in_u8);
}
static void uart_stm32_poll_out(const struct device *dev, unsigned char c)
{
uart_stm32_poll_out_visitor(dev, (void *)&c, uart_stm32_poll_out_u8);
}
static int uart_stm32_err_check(const struct device *dev)
{
const struct uart_stm32_config *config = dev->config;
@ -708,9 +734,11 @@ static inline void __uart_stm32_get_clock(const struct device *dev)
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
static int uart_stm32_fifo_fill(const struct device *dev,
const uint8_t *tx_data,
int size)
typedef void (*fifo_fill_fn)(const struct uart_stm32_config *config, const void *tx_data,
const uint8_t offset);
static int uart_stm32_fifo_fill_visitor(const struct device *dev, const void *tx_data, int size,
fifo_fill_fn fill_fn)
{
const struct uart_stm32_config *config = dev->config;
uint8_t num_tx = 0U;
@ -723,12 +751,12 @@ static int uart_stm32_fifo_fill(const struct device *dev,
/* Lock interrupts to prevent nested interrupts or thread switch */
key = irq_lock();
while ((size - num_tx > 0) &&
LL_USART_IsActiveFlag_TXE(config->usart)) {
while ((size - num_tx > 0) && LL_USART_IsActiveFlag_TXE(config->usart)) {
/* TXE flag will be cleared with byte write to DR|RDR register */
/* Send a character (8bit , parity none) */
LL_USART_TransmitData8(config->usart, tx_data[num_tx++]);
/* Send a character */
fill_fn(config, tx_data, num_tx);
num_tx++;
}
irq_unlock(key);
@ -736,32 +764,70 @@ static int uart_stm32_fifo_fill(const struct device *dev,
return num_tx;
}
static int uart_stm32_fifo_read(const struct device *dev, uint8_t *rx_data,
const int size)
static void fifo_fill_with_u8(const struct uart_stm32_config *config,
const void *tx_data, const uint8_t offset)
{
const uint8_t *data = (const uint8_t *)tx_data;
/* Send a character (8bit) */
LL_USART_TransmitData8(config->usart, data[offset]);
}
static int uart_stm32_fifo_fill(const struct device *dev, const uint8_t *tx_data, int size)
{
if (uart_stm32_ll2cfg_databits(uart_stm32_get_databits(dev), uart_stm32_get_parity(dev)) ==
UART_CFG_DATA_BITS_9) {
return -ENOTSUP;
}
return uart_stm32_fifo_fill_visitor(dev, (const void *)tx_data, size,
fifo_fill_with_u8);
}
typedef void (*fifo_read_fn)(const struct uart_stm32_config *config, void *rx_data,
const uint8_t offset);
static int uart_stm32_fifo_read_visitor(const struct device *dev, void *rx_data, const int size,
fifo_read_fn read_fn)
{
const struct uart_stm32_config *config = dev->config;
uint8_t num_rx = 0U;
while ((size - num_rx > 0) &&
LL_USART_IsActiveFlag_RXNE(config->usart)) {
while ((size - num_rx > 0) && LL_USART_IsActiveFlag_RXNE(config->usart)) {
/* RXNE flag will be cleared upon read from DR|RDR register */
/* Receive a character (8bit , parity none) */
rx_data[num_rx++] = LL_USART_ReceiveData8(config->usart);
read_fn(config, rx_data, num_rx);
num_rx++;
/* Clear overrun error flag */
if (LL_USART_IsActiveFlag_ORE(config->usart)) {
LL_USART_ClearFlag_ORE(config->usart);
/*
* On stm32 F4X, F1X, and F2X, the RXNE flag is affected (cleared) by
* the uart_err_check function call (on errors flags clearing)
*/
/*
* On stm32 F4X, F1X, and F2X, the RXNE flag is affected (cleared) by
* the uart_err_check function call (on errors flags clearing)
*/
}
}
return num_rx;
}
static void fifo_read_with_u8(const struct uart_stm32_config *config, void *rx_data,
const uint8_t offset)
{
uint8_t *data = (uint8_t *)rx_data;
data[offset] = LL_USART_ReceiveData8(config->usart);
}
static int uart_stm32_fifo_read(const struct device *dev, uint8_t *rx_data, const int size)
{
if (uart_stm32_ll2cfg_databits(uart_stm32_get_databits(dev), uart_stm32_get_parity(dev)) ==
UART_CFG_DATA_BITS_9) {
return -ENOTSUP;
}
return uart_stm32_fifo_read_visitor(dev, (void *)rx_data, size,
fifo_read_with_u8);
}
static void uart_stm32_irq_tx_enable(const struct device *dev)
{
const struct uart_stm32_config *config = dev->config;