diff --git a/boards/arm/frdm_k22f/frdm_k22f.dts b/boards/arm/frdm_k22f/frdm_k22f.dts
index 4e4003aef20..9bc59cfccca 100644
--- a/boards/arm/frdm_k22f/frdm_k22f.dts
+++ b/boards/arm/frdm_k22f/frdm_k22f.dts
@@ -107,7 +107,7 @@ arduino_spi: &spi0 {
 	status = "okay";
 };
 
-&pwm3 {
+&ftm3 {
 	status = "okay";
 };
 
@@ -116,7 +116,7 @@ arduino_spi: &spi0 {
 	current-speed = <115200>;
 };
 
-&usbd {
+&usbotg {
 	compatible = "nxp,kinetis-usbd";
 	status = "okay";
 	num-bidir-endpoints = <8>;
diff --git a/dts/arm/nxp/nxp_k2x.dtsi b/dts/arm/nxp/nxp_k2x.dtsi
index c3fbc9d26fc..76a38d253e2 100644
--- a/dts/arm/nxp/nxp_k2x.dtsi
+++ b/dts/arm/nxp/nxp_k2x.dtsi
@@ -24,22 +24,22 @@
 		gpio-e = &gpioe;
 		i2c-0 = &i2c0;
 		i2c-1 = &i2c1;
-		pinmux-a = &pinmux_a;
-		pinmux-b = &pinmux_b;
-		pinmux-c = &pinmux_c;
-		pinmux-d = &pinmux_d;
-		pinmux-e = &pinmux_e;
-		pwm-0 = &pwm0;
-		pwm-1 = &pwm1;
-		pwm-2 = &pwm2;
-		pwm-3 = &pwm3;
+		pinmux-a = &porta;
+		pinmux-b = &portb;
+		pinmux-c = &portc;
+		pinmux-d = &portd;
+		pinmux-e = &porte;
+		pwm-0 = &ftm0;
+		pwm-1 = &ftm1;
+		pwm-2 = &ftm2;
+		pwm-3 = &ftm3;
 		spi-0 = &spi0;
 		spi-1 = &spi1;
 		uart-0 = &uart0;
 		uart-1 = &uart1;
 		uart-2 = &uart2;
 		uart-3 = &uart3;
-		usbd-0 = &usbd;
+		usbd-0 = &usbotg;
 		watchdog0 = &wdog;
 	};
 
@@ -75,8 +75,7 @@
 	};
 
 	soc {
-
-		mpu@4000d000 {
+		mpu: mpu@4000d000 {
 			compatible = "nxp,k22f-mpu";
 			reg = <0x4000d000 0x824>;
 
@@ -91,14 +90,14 @@
 			clock-controller;
 		};
 
-		clock-controller@40065000 {
+		osc: clock-controller@40065000 {
 			compatible = "nxp,k22f-osc";
 			reg = <0x40065000 0x4>;
 
 			enable-external-reference;
 		};
 
-		rtc@4003d000 {
+		rtc: rtc@4003d000 {
 			compatible = "nxp,k22f-rtc";
 			reg = <0x4003d000 0x808>;
 			clock-frequency = <32768>;
@@ -199,31 +198,31 @@
 			status = "disabled";
 		};
 
-		pinmux_a: pinmux@40049000 {
+		porta: pinmux@40049000 {
 			compatible = "nxp,kinetis-pinmux";
 			reg = <0x40049000 0xd0>;
 			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 9>;
 		};
 
-		pinmux_b: pinmux@4004a000 {
+		portb: pinmux@4004a000 {
 			compatible = "nxp,kinetis-pinmux";
 			reg = <0x4004a000 0xd0>;
 			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 10>;
 		};
 
-		pinmux_c: pinmux@4004b000 {
+		portc: pinmux@4004b000 {
 			compatible = "nxp,kinetis-pinmux";
 			reg = <0x4004b000 0xd0>;
 			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 11>;
 		};
 
-		pinmux_d: pinmux@4004c000 {
+		portd: pinmux@4004c000 {
 			compatible = "nxp,kinetis-pinmux";
 			reg = <0x4004c000 0xd0>;
 			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 12>;
 		};
 
-		pinmux_e: pinmux@4004d000 {
+		porte: pinmux@4004d000 {
 			compatible = "nxp,kinetis-pinmux";
 			reg = <0x4004d000 0xd0>;
 			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 13>;
@@ -236,7 +235,7 @@
 			label = "GPIO_0";
 			gpio-controller;
 			#gpio-cells = <2>;
-			nxp,kinetis-port = <&pinmux_a>;
+			nxp,kinetis-port = <&porta>;
 		};
 
 		gpiob: gpio@400ff040 {
@@ -246,7 +245,7 @@
 			label = "GPIO_1";
 			gpio-controller;
 			#gpio-cells = <2>;
-			nxp,kinetis-port = <&pinmux_b>;
+			nxp,kinetis-port = <&portb>;
 		};
 
 		gpioc: gpio@400ff080 {
@@ -256,7 +255,7 @@
 			label = "GPIO_2";
 			gpio-controller;
 			#gpio-cells = <2>;
-			nxp,kinetis-port = <&pinmux_c>;
+			nxp,kinetis-port = <&portc>;
 		};
 
 		gpiod: gpio@400ff0c0 {
@@ -266,7 +265,7 @@
 			label = "GPIO_3";
 			gpio-controller;
 			#gpio-cells = <2>;
-			nxp,kinetis-port = <&pinmux_d>;
+			nxp,kinetis-port = <&portd>;
 		};
 
 		gpioe: gpio@400ff100 {
@@ -276,7 +275,7 @@
 			label = "GPIO_4";
 			gpio-controller;
 			#gpio-cells = <2>;
-			nxp,kinetis-port = <&pinmux_e>;
+			nxp,kinetis-port = <&porte>;
 		};
 
 		spi0: spi@4002c000 {
@@ -308,7 +307,7 @@
 			label = "WDT_0";
 		};
 
-		pwm0: pwm@40038000{
+		ftm0: pwm@40038000{
 			compatible = "nxp,kinetis-ftm";
 			reg = <0x40038000 0x98>;
 			interrupts = <42 0>;
@@ -317,7 +316,7 @@
 			#pwm-cells = <3>;
 		};
 
-		pwm1: pwm@40039000{
+		ftm1: pwm@40039000{
 			compatible = "nxp,kinetis-ftm";
 			reg = <0x40039000 0x98>;
 			interrupts = <43 0>;
@@ -326,7 +325,7 @@
 			#pwm-cells = <3>;
 		};
 
-		pwm2: pwm@4003a000{
+		ftm2: pwm@4003a000{
 			compatible = "nxp,kinetis-ftm";
 			reg = <0x4003a000 0x98>;
 			interrupts = <44 0>;
@@ -335,7 +334,7 @@
 			#pwm-cells = <3>;
 		};
 
-		pwm3: pwm@400b9000{
+		ftm3: pwm@400b9000{
 			compatible = "nxp,kinetis-ftm";
 			reg = <0x400b9000 0x98>;
 			interrupts = <71 0>;
@@ -353,7 +352,7 @@
 			#io-channel-cells = <1>;
 		};
 
-		usbd: usbd@40072000 {
+		usbotg: usbd@40072000 {
 			compatible = "nxp,kinetis-usbd";
 			reg = <0x40072000 0x1000>;
 			interrupts = <53 1>;