boards: witte_technology: linum: add initial support
To the Linum board from Witte Technology based on STM32H753xx. Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
This commit is contained in:
Felipe Neves
Fabio Baltieri
parent
0c0c420424
commit
3d39644a2c
12 changed files with 908 additions and 0 deletions
10
boards/witte/index.rst
Normal file
10
boards/witte/index.rst
Normal file
|
|
@ -0,0 +1,10 @@
|
||||||
|
.. _boards-witte:
|
||||||
|
|
||||||
|
Witte
|
||||||
|
#####
|
||||||
|
|
||||||
|
.. toctree::
|
||||||
|
:maxdepth: 1
|
||||||
|
:glob:
|
||||||
|
|
||||||
|
**/*
|
||||||
15
boards/witte/linum/Kconfig.defconfig
Normal file
15
boards/witte/linum/Kconfig.defconfig
Normal file
|
|
@ -0,0 +1,15 @@
|
||||||
|
# STM32H753ZI Linum board configuration
|
||||||
|
|
||||||
|
# Copyright (c) 2024 Felipe Neves
|
||||||
|
# SPDX-License-Identifier: Apache-2.0
|
||||||
|
|
||||||
|
if BOARD_LINUM
|
||||||
|
|
||||||
|
if NETWORKING
|
||||||
|
|
||||||
|
config NET_L2_ETHERNET
|
||||||
|
default y
|
||||||
|
|
||||||
|
endif # NETWORKING
|
||||||
|
|
||||||
|
endif # BOARD_LINUM
|
||||||
5
boards/witte/linum/Kconfig.linum
Normal file
5
boards/witte/linum/Kconfig.linum
Normal file
|
|
@ -0,0 +1,5 @@
|
||||||
|
# Copyright (c) 2024 Felipe Neves
|
||||||
|
# SPDX-License-Identifier: Apache-2.0
|
||||||
|
|
||||||
|
config BOARD_LINUM
|
||||||
|
select SOC_STM32H753XX
|
||||||
9
boards/witte/linum/board.cmake
Normal file
9
boards/witte/linum/board.cmake
Normal file
|
|
@ -0,0 +1,9 @@
|
||||||
|
# SPDX-License-Identifier: Apache-2.0
|
||||||
|
|
||||||
|
board_runner_args(jlink "--device=STM32H753BI" "--speed=4000")
|
||||||
|
board_runner_args(stm32cubeprogrammer "--port=swd" "--reset-mode=hw")
|
||||||
|
board_runner_args(openocd --target-handle=_CHIPNAME.cpu0)
|
||||||
|
|
||||||
|
include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
|
||||||
|
include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)
|
||||||
|
include(${ZEPHYR_BASE}/boards/common/stm32cubeprogrammer.board.cmake)
|
||||||
5
boards/witte/linum/board.yml
Normal file
5
boards/witte/linum/board.yml
Normal file
|
|
@ -0,0 +1,5 @@
|
||||||
|
board:
|
||||||
|
name: linum
|
||||||
|
vendor: witte
|
||||||
|
socs:
|
||||||
|
- name: stm32h753xx
|
||||||
BIN
boards/witte/linum/doc/img/linum-stm32h753bi-top.jpg
Normal file
BIN
boards/witte/linum/doc/img/linum-stm32h753bi-top.jpg
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 15 KiB |
406
boards/witte/linum/doc/index.rst
Normal file
406
boards/witte/linum/doc/index.rst
Normal file
|
|
@ -0,0 +1,406 @@
|
||||||
|
.. _linum:
|
||||||
|
|
||||||
|
Witte Technology Linum Board
|
||||||
|
############################
|
||||||
|
|
||||||
|
Overview
|
||||||
|
********
|
||||||
|
Linum is a development board released by Witte Tenology in 2023, and it was developed around the
|
||||||
|
STM32H753BI microcontroller. The board has 2 expansion connectors used by the LCD display with
|
||||||
|
touchscreen and another for access to other peripherals of microcontroller. Also it brings plenty
|
||||||
|
of communications interfaces like UART with RS232 and RS485 capabillities, CAN bus compatible to
|
||||||
|
FD standard, and networking over Ethernet.
|
||||||
|
|
||||||
|
.. image:: img/linum-stm32h753bi-top.jpg
|
||||||
|
:align: center
|
||||||
|
:alt: Linum development board
|
||||||
|
|
||||||
|
Hardware
|
||||||
|
********
|
||||||
|
|
||||||
|
The board features:
|
||||||
|
- 8 to 52V power supply
|
||||||
|
- SWD Pins for use as STLink (Pin header) and TC2030-IDC 6-Pin Tag-Connect Plug-of-Nails™ Connector
|
||||||
|
- Crystal for HS 25MHz
|
||||||
|
- Crystal for RTC 32.768KHz
|
||||||
|
- 1 UART serial for debug
|
||||||
|
- 1 Led RGB
|
||||||
|
- 1 Buzzer without internal oscillator
|
||||||
|
- 1 Mono audio up to 3W
|
||||||
|
- 1 Ethernet 10/100
|
||||||
|
- 1 MicroSD connector supporting 1 or 4-bit bus
|
||||||
|
- 1 USB 2.0 Host/Device
|
||||||
|
- 1 EEPROM memory with 512K bits
|
||||||
|
- 1 External SRAM memory with 8MB
|
||||||
|
- 1 NOR memory with 16MB
|
||||||
|
- 2 On-board RS232 Transceiver with RTS/CTS
|
||||||
|
- 2 On-board RS485 Transceiver
|
||||||
|
- 2 On-board CAN-FD Transceiver
|
||||||
|
|
||||||
|
Expansion connector 1 features:
|
||||||
|
- 1 Display RBG 888
|
||||||
|
- 1 Capacitive Touchscreen sensor
|
||||||
|
|
||||||
|
Expansion connector 2 features.
|
||||||
|
- 1 SPI
|
||||||
|
- 1 I2C
|
||||||
|
- 1 One Wire
|
||||||
|
- 2 DACs
|
||||||
|
- 6 PWM Channels
|
||||||
|
- 10 ADCs
|
||||||
|
|
||||||
|
Supported Features
|
||||||
|
==================
|
||||||
|
|
||||||
|
The Zephyr Linum board configuration supports the following hardware
|
||||||
|
features:
|
||||||
|
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| Interface | Controller | Driver/Component |
|
||||||
|
+===========+============+=====================================+
|
||||||
|
| NVIC | on-chip | nested vector interrupt controller |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| UART | on-chip | serial port |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| PINMUX | on-chip | pinmux |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| GPIO | on-chip | gpio |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| RTC | on-chip | counter |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| I2C | on-chip | i2c |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| PWM | on-chip | pwm |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| ADC | on-chip | adc |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| RNG | on-chip | True Random number generator |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| ETHERNET | on-chip | ethernet |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| SPI | on-chip | spi |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| USB | on-chip | usb_device |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| CAN/CANFD | on-chip | canbus |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| LTDC | on-chip | LCD Interface |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| FMC | on-chip | memc (SDRAM) |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| SDMMC | on-chip | disk access |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
|
||||||
|
Other hardware features are not yet supported on this Zephyr port.
|
||||||
|
|
||||||
|
The default configuration can be found in the defconfig file:
|
||||||
|
:zephyr_file:`boards/witte_technology/linum/linum_defconfig`
|
||||||
|
|
||||||
|
|
||||||
|
Default Zephyr Peripheral Mapping:
|
||||||
|
----------------------------------
|
||||||
|
|
||||||
|
|
||||||
|
BOARD-LEDs
|
||||||
|
----------
|
||||||
|
|
||||||
|
The LINUM-STM32H753BI has 3 software controllable LEDs.
|
||||||
|
|
||||||
|
======= =====
|
||||||
|
LED RGB PINS
|
||||||
|
======= =====
|
||||||
|
LED_R PG2
|
||||||
|
LED_G PG3
|
||||||
|
LED_B PB2
|
||||||
|
======= =====
|
||||||
|
|
||||||
|
UART/USART
|
||||||
|
----------
|
||||||
|
|
||||||
|
The LINUM-STM32H753BI used the USART1 for serial console.
|
||||||
|
|
||||||
|
USART1
|
||||||
|
------
|
||||||
|
|
||||||
|
====== =====
|
||||||
|
USART1 PINS
|
||||||
|
====== =====
|
||||||
|
TX PB14
|
||||||
|
RX PB15
|
||||||
|
====== =====
|
||||||
|
|
||||||
|
The LINUM-STM32H753BI board has two on-board RS-232 transceiver connected to USART2 and USART3.
|
||||||
|
|
||||||
|
====== =====
|
||||||
|
USART2 PINS
|
||||||
|
====== =====
|
||||||
|
TXD PD5
|
||||||
|
RXD PD6
|
||||||
|
CTS PD3
|
||||||
|
RTS PD4
|
||||||
|
====== =====
|
||||||
|
|
||||||
|
====== =====
|
||||||
|
USART3 PINS
|
||||||
|
====== =====
|
||||||
|
TXD PB10
|
||||||
|
RXD PB11
|
||||||
|
CTS PD11
|
||||||
|
RTS PD12
|
||||||
|
====== =====
|
||||||
|
|
||||||
|
The LINUM-STM32H753BI board has two on-board RS-485 transceiver connected to USART4 and USART6.
|
||||||
|
|
||||||
|
====== =====
|
||||||
|
UART4 PINS
|
||||||
|
====== =====
|
||||||
|
TXD PB9
|
||||||
|
RXD PB8
|
||||||
|
DE PA15
|
||||||
|
====== =====
|
||||||
|
|
||||||
|
====== =====
|
||||||
|
USART6 PINS
|
||||||
|
====== =====
|
||||||
|
TXD PC6
|
||||||
|
RXD PC7
|
||||||
|
DE PG12
|
||||||
|
====== =====
|
||||||
|
|
||||||
|
SDMMC
|
||||||
|
-----
|
||||||
|
|
||||||
|
The LINUM-STM32H753BI has one SDCard slot connected as below:
|
||||||
|
|
||||||
|
========== =====
|
||||||
|
SDMMC1 PINS
|
||||||
|
========== =====
|
||||||
|
SDMMC_D0 PC8
|
||||||
|
SDMMC_D1 PC9
|
||||||
|
SDMMC_D2 PC10
|
||||||
|
SDMMC_D3 PC11
|
||||||
|
SDMMC_DK PC12
|
||||||
|
========== =====
|
||||||
|
|
||||||
|
=============== =====
|
||||||
|
GPIO PINS
|
||||||
|
=============== =====
|
||||||
|
SDCARD_DETECTED PG7
|
||||||
|
SDCARD_PWR_EN PD7
|
||||||
|
=============== =====
|
||||||
|
|
||||||
|
ETHERNET
|
||||||
|
--------
|
||||||
|
|
||||||
|
The LINUM-STM32H753BI has a ethernet connection using the transceiver KSZ8081RNACA.
|
||||||
|
|
||||||
|
============ =====
|
||||||
|
ETH PINS
|
||||||
|
============ =====
|
||||||
|
ETH_REF_CLK PA1
|
||||||
|
ETH_MDIO PA2
|
||||||
|
ETH_CRS_DV PA7
|
||||||
|
ETH_MDC PC1
|
||||||
|
ETH_RXD0 PC4
|
||||||
|
ETH_RXD1 PC5
|
||||||
|
ETH_TX_EN PG11
|
||||||
|
ETH_TXD0 PG13
|
||||||
|
ETH_TXD1 PG14
|
||||||
|
ETH_CLK PA8
|
||||||
|
ETH_RESET PI4
|
||||||
|
============ =====
|
||||||
|
|
||||||
|
CAN-FD
|
||||||
|
------
|
||||||
|
|
||||||
|
The LINUM-STM32H753BI board has two on-board CAN-FD transceiver connected to FDCAN1 and FDCAN2.
|
||||||
|
|
||||||
|
====== =====
|
||||||
|
FDCAN1 PINS
|
||||||
|
====== =====
|
||||||
|
TXD PH13
|
||||||
|
RXD PH14
|
||||||
|
STD PI2
|
||||||
|
====== =====
|
||||||
|
|
||||||
|
====== =====
|
||||||
|
FDCAN2 PINS
|
||||||
|
====== =====
|
||||||
|
TXD PB13
|
||||||
|
RXD PB12
|
||||||
|
STD PE3
|
||||||
|
====== =====
|
||||||
|
|
||||||
|
USB
|
||||||
|
---
|
||||||
|
|
||||||
|
The LINUM-STM32H753BI has one usb port.
|
||||||
|
|
||||||
|
========= =====
|
||||||
|
USB PINS
|
||||||
|
========= =====
|
||||||
|
USB_VBUS PA9
|
||||||
|
USB_N PA11
|
||||||
|
USB_P PA12
|
||||||
|
USB_EN PI12
|
||||||
|
USB_FLT PI13
|
||||||
|
========= =====
|
||||||
|
|
||||||
|
I2C3
|
||||||
|
----
|
||||||
|
The LINUM-STM32H753BI connects the EEPROM memory and the touchscreen sensor to I2C3.
|
||||||
|
|
||||||
|
====== =====
|
||||||
|
I2C3 PINS
|
||||||
|
====== =====
|
||||||
|
SCL PH7
|
||||||
|
SDA PH8
|
||||||
|
====== =====
|
||||||
|
|
||||||
|
External SDRAM
|
||||||
|
--------------
|
||||||
|
The LINUM-STM32H753BI has a external SDRAM with 8Mbytes connected to FMC peripheral.
|
||||||
|
|
||||||
|
=========== =====
|
||||||
|
FMC PINS
|
||||||
|
=========== =====
|
||||||
|
FMC_A0 PF0
|
||||||
|
FMC_A1 PF1
|
||||||
|
FMC_A2 PF2
|
||||||
|
FMC_A3 PF3
|
||||||
|
FMC_A4 PF4
|
||||||
|
FMC_A5 PF5
|
||||||
|
FMC_A6 PF12
|
||||||
|
FMC_A7 PF13
|
||||||
|
FMC_A8 PF14
|
||||||
|
FMC_A9 PF15
|
||||||
|
FMC_A10 PG0
|
||||||
|
FMC_A11 PG1
|
||||||
|
FMC_BA0 PG4
|
||||||
|
FMC_BA1 PG5
|
||||||
|
FMC_D0 PD14
|
||||||
|
FMC_D1 PD15
|
||||||
|
FMC_D2 PD0
|
||||||
|
FMC_D3 PD1
|
||||||
|
FMC_D4 PE7
|
||||||
|
FMC_D5 PE8
|
||||||
|
FMC_D6 PE9
|
||||||
|
FMC_D7 PE10
|
||||||
|
FMC_D8 PE11
|
||||||
|
FMC_D9 PE12
|
||||||
|
FMC_D10 PE13
|
||||||
|
FMC_D11 PE14
|
||||||
|
FMC_D12 PE15
|
||||||
|
FMC_D13 PD8
|
||||||
|
FMC_D14 PD9
|
||||||
|
FMC_D15 PD10
|
||||||
|
FMC_NBL0 PE0
|
||||||
|
FMC_NBL1 PE1
|
||||||
|
FMC_SDCKE0 PC3
|
||||||
|
FMC_SDCLK PG8
|
||||||
|
FMC_SDNCAS PG15
|
||||||
|
FMC_SDNEO PC2
|
||||||
|
FMC_SDNRAS PF11
|
||||||
|
FMC_SDNWE PC0
|
||||||
|
=========== =====
|
||||||
|
|
||||||
|
LCD
|
||||||
|
---
|
||||||
|
The LINUM-STM32H753BI use the LTDC to support one LCD with RGB connection.
|
||||||
|
|
||||||
|
============= =====
|
||||||
|
LTDC PINS
|
||||||
|
============= =====
|
||||||
|
LTDC_B0 PJ12
|
||||||
|
LTDC_B1 PJ13
|
||||||
|
LTDC_B2 PJ14
|
||||||
|
LTDC_B3 PJ15
|
||||||
|
LTDC_B4 PK3
|
||||||
|
LTDC_B5 PK4
|
||||||
|
LTDC_B6 PK5
|
||||||
|
LTDC_B7 PK6
|
||||||
|
LTDC_CLK PI14
|
||||||
|
LTDC_DE PK7
|
||||||
|
LTDC_G0 PJ7
|
||||||
|
LTDC_G1 PJ8
|
||||||
|
LTDC_G2 PJ9
|
||||||
|
LTDC_G3 PJ10
|
||||||
|
LTDC_G4 PJ11
|
||||||
|
LTDC_G5 PK0
|
||||||
|
LTDC_G6 PK1
|
||||||
|
LTDC_G7 PK2
|
||||||
|
LTDC_HSYNC PI10
|
||||||
|
LTDC_R0 PI15
|
||||||
|
LTDC_R1 PJ0
|
||||||
|
LTDC_R2 PJ1
|
||||||
|
LTDC_R3 PJ2
|
||||||
|
LTDC_R4 PJ3
|
||||||
|
LTDC_R5 PJ4
|
||||||
|
LTDC_R6 PJ5
|
||||||
|
LTDC_R7 PJ6
|
||||||
|
LTDC_VSYNC PI9
|
||||||
|
PWM_BACKLIGHT PH6
|
||||||
|
============= =====
|
||||||
|
|
||||||
|
System Clock
|
||||||
|
------------
|
||||||
|
|
||||||
|
Linum H753ZI System Clock could be driven by an internal or external
|
||||||
|
oscillator, as well as the main PLL clock. By default, the System clock is
|
||||||
|
driven by the PLL clock at 480MHz, driven by an 25MHz high-speed external clock.
|
||||||
|
|
||||||
|
|
||||||
|
Programming and Debugging
|
||||||
|
*************************
|
||||||
|
|
||||||
|
Applications for the ``linum`` board configuration can be built and
|
||||||
|
flashed in the usual way (see :ref:`build_an_application` and
|
||||||
|
:ref:`application_run` for more details).
|
||||||
|
|
||||||
|
.. note::
|
||||||
|
|
||||||
|
For debugging or programming Linum you will need to use an external debug
|
||||||
|
debug or flash tool and connect it to the SWD Connnector. JLink or ST-Link
|
||||||
|
probes are examples of out of the box compatible tools.
|
||||||
|
|
||||||
|
Flashing
|
||||||
|
========
|
||||||
|
|
||||||
|
Flashing an application to the Linum board
|
||||||
|
-------------------------------------------
|
||||||
|
|
||||||
|
Here is an example for the :ref:`hello_world` application.
|
||||||
|
|
||||||
|
Run a serial host program to connect with your Nucleo board.
|
||||||
|
|
||||||
|
.. code-block:: console
|
||||||
|
|
||||||
|
$ minicom -b 115200 -D /dev/ttyACM0
|
||||||
|
|
||||||
|
Build and flash the application:
|
||||||
|
|
||||||
|
.. zephyr-app-commands::
|
||||||
|
:zephyr-app: samples/hello_world
|
||||||
|
:board: linum
|
||||||
|
:goals: build flash
|
||||||
|
|
||||||
|
You should see the following message on the console:
|
||||||
|
|
||||||
|
.. code-block:: console
|
||||||
|
|
||||||
|
$ Hello World! linum
|
||||||
|
|
||||||
|
Debugging
|
||||||
|
=========
|
||||||
|
|
||||||
|
You can debug an application in the usual way. Here is an example for the
|
||||||
|
:ref:`hello_world` application.
|
||||||
|
|
||||||
|
.. zephyr-app-commands::
|
||||||
|
:zephyr-app: samples/hello_world
|
||||||
|
:board: linum
|
||||||
|
:maybe-skip-config:
|
||||||
|
:goals: debug
|
||||||
|
|
||||||
|
.. _Witte Linum website:
|
||||||
|
https://wittetech.com/
|
||||||
392
boards/witte/linum/linum.dts
Normal file
392
boards/witte/linum/linum.dts
Normal file
|
|
@ -0,0 +1,392 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2024 Felipe Neves
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
|
*/
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
#include <st/h7/stm32h753Xi.dtsi>
|
||||||
|
#include <st/h7/stm32h753bitx-pinctrl.dtsi>
|
||||||
|
#include <zephyr/dt-bindings/input/input-event-codes.h>
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "Witte Technology STM32H753ZI Linum board";
|
||||||
|
compatible = "witte,linum";
|
||||||
|
|
||||||
|
chosen {
|
||||||
|
zephyr,console = &usart1;
|
||||||
|
zephyr,shell-uart = &usart1;
|
||||||
|
zephyr,sram = &sram0;
|
||||||
|
zephyr,flash = &flash0;
|
||||||
|
zephyr,dtcm = &dtcm;
|
||||||
|
zephyr,code-partition = &slot0_partition;
|
||||||
|
zephyr,canbus = &fdcan1;
|
||||||
|
};
|
||||||
|
|
||||||
|
sdram1: sdram@c0000000 {
|
||||||
|
compatible = "zephyr,memory-region", "mmio-sram";
|
||||||
|
device_type = "memory";
|
||||||
|
reg = <0xc0000000 DT_SIZE_M(8)>;
|
||||||
|
zephyr,memory-region = "SDRAM1";
|
||||||
|
zephyr,memory-attr = <( DT_MEM_ARM(ATTR_MPU_RAM) )>;
|
||||||
|
};
|
||||||
|
|
||||||
|
leds: leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
green_led: led_0 {
|
||||||
|
gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
|
||||||
|
label = "User LD1";
|
||||||
|
};
|
||||||
|
red_led: led_1 {
|
||||||
|
gpios = <&gpiob 2 GPIO_ACTIVE_LOW>;
|
||||||
|
label = "User LD2";
|
||||||
|
};
|
||||||
|
blue_led: led_2 {
|
||||||
|
gpios = <&gpiog 3 GPIO_ACTIVE_LOW>;
|
||||||
|
label = "User LD3";
|
||||||
|
};
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
led0 = &green_led;
|
||||||
|
led1 = &blue_led;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpiod {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
/* power the SD card */
|
||||||
|
mcu-sel-gpios {
|
||||||
|
gpio-hog;
|
||||||
|
gpios = <7 GPIO_ACTIVE_HIGH>;
|
||||||
|
output-high;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpioi {
|
||||||
|
status = "okay";
|
||||||
|
/* power the ETH PHY , and FDCAN1 XVCR*/
|
||||||
|
mcu-sel-gpios {
|
||||||
|
gpio-hog;
|
||||||
|
gpios = <2 GPIO_ACTIVE_HIGH>,
|
||||||
|
<4 GPIO_ACTIVE_HIGH>;
|
||||||
|
|
||||||
|
output-high;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpioe {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
/* power FDCAN2 XVCR*/
|
||||||
|
mcu-sel-gpios {
|
||||||
|
gpio-hog;
|
||||||
|
gpios = <2 GPIO_ACTIVE_HIGH>,
|
||||||
|
<4 GPIO_ACTIVE_HIGH>;
|
||||||
|
|
||||||
|
output-high;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&clk_lsi {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&clk_hsi48 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&clk_hse {
|
||||||
|
/delete-property/ hse-bypass;
|
||||||
|
clock-frequency = <DT_FREQ_M(25)>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&pll {
|
||||||
|
div-m = <5>;
|
||||||
|
mul-n = <192>;
|
||||||
|
div-p = <2>;
|
||||||
|
div-q = <4>;
|
||||||
|
div-r = <4>;
|
||||||
|
clocks = <&clk_hse>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&pll2 {
|
||||||
|
div-m = <2>;
|
||||||
|
mul-n = <48>;
|
||||||
|
div-p = <8>;
|
||||||
|
div-q = <40>;
|
||||||
|
div-r = <3>;
|
||||||
|
clocks = <&clk_hse>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&rcc {
|
||||||
|
clocks = <&pll>;
|
||||||
|
clock-frequency = <DT_FREQ_M(480)>;
|
||||||
|
d1cpre = <1>;
|
||||||
|
hpre = <2>;
|
||||||
|
d1ppre = <2>;
|
||||||
|
d2ppre1 = <2>;
|
||||||
|
d2ppre2 = <2>;
|
||||||
|
d3ppre = <2>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&usart1 {
|
||||||
|
pinctrl-0 = <&usart1_tx_pb14 &usart1_rx_pb15>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
current-speed = <115200>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&usart2 {
|
||||||
|
pinctrl-0 = <&usart2_tx_pd5 &usart2_rx_pd6>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
current-speed = <115200>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&usart3 {
|
||||||
|
pinctrl-0 = <&usart3_tx_pb10 &usart3_rx_pb11>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
current-speed = <115200>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&uart4 {
|
||||||
|
pinctrl-0 = <&uart4_tx_pb9 &uart4_rx_pb8>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
current-speed = <115200>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&usart6 {
|
||||||
|
pinctrl-0 = <&usart6_tx_pc6 &usart6_rx_pc7>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
current-speed = <115200>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
zephyr_udc0: &usbotg_fs {
|
||||||
|
pinctrl-0 = <&usb_otg_fs_dm_pa11 &usb_otg_fs_dp_pa12>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&rtc {
|
||||||
|
clocks = <&rcc STM32_CLOCK_BUS_APB4 0x00010000>,
|
||||||
|
<&rcc STM32_SRC_LSI RTC_SEL(2)>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&i2c3 {
|
||||||
|
pinctrl-0 = <&i2c3_scl_ph7 &i2c3_sda_ph8>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
status = "okay";
|
||||||
|
clock-frequency = <I2C_BITRATE_FAST>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&timers12 {
|
||||||
|
st,prescaler = <10000>;
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
pwm12: pwm {
|
||||||
|
status = "okay";
|
||||||
|
pinctrl-0 = <&tim12_ch1_pb14>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&adc1 {
|
||||||
|
pinctrl-0 = <&adc1_inp15_pa3>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
st,adc-clock-source = <SYNC>;
|
||||||
|
st,adc-prescaler = <4>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&rng {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&fdcan1 {
|
||||||
|
clocks = <&rcc STM32_CLOCK_BUS_APB1_2 0x00000100>,
|
||||||
|
<&rcc STM32_SRC_PLL2_Q FDCAN_SEL(2)>;
|
||||||
|
pinctrl-0 = <&fdcan1_tx_ph13 &fdcan1_rx_ph14>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&fdcan2 {
|
||||||
|
clocks = <&rcc STM32_CLOCK_BUS_APB1_2 0x00000100>,
|
||||||
|
<&rcc STM32_SRC_PLL2_Q FDCAN_SEL(2)>;
|
||||||
|
pinctrl-0 = <&fdcan2_rx_pb12 &fdcan2_tx_pb13>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&mac {
|
||||||
|
status = "okay";
|
||||||
|
pinctrl-0 = <ð_rxd0_pc4
|
||||||
|
ð_rxd1_pc5
|
||||||
|
ð_ref_clk_pa1
|
||||||
|
ð_crs_dv_pa7
|
||||||
|
ð_tx_en_pg11
|
||||||
|
ð_txd0_pg13
|
||||||
|
ð_txd1_pg14>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
};
|
||||||
|
|
||||||
|
&mdio {
|
||||||
|
status = "okay";
|
||||||
|
pinctrl-0 = <ð_mdio_pa2 ð_mdc_pc1>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
|
||||||
|
ethernet-phy@0 {
|
||||||
|
compatible = "microchip,ksz8081";
|
||||||
|
reg = <0x00>;
|
||||||
|
status = "okay";
|
||||||
|
microchip,interface-type = "rmii-25MHz";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&spi1 {
|
||||||
|
status = "okay";
|
||||||
|
pinctrl-0 = <&spi1_sck_pa5 &spi1_miso_pa6 &spi1_mosi_pb5>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
cs-gpios = <&gpiod 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&fmc {
|
||||||
|
pinctrl-0 = <&fmc_nbl0_pe0
|
||||||
|
&fmc_nbl1_pe1 &fmc_sdclk_pg8 &fmc_sdnwe_pc0 &fmc_sdcke0_pc3_c
|
||||||
|
&fmc_sdne0_pc2_c &fmc_sdnras_pf11 &fmc_sdncas_pg15
|
||||||
|
&fmc_a0_pf0 &fmc_a1_pf1 &fmc_a2_pf2 &fmc_a3_pf3 &fmc_a4_pf4
|
||||||
|
&fmc_a5_pf5 &fmc_a6_pf12 &fmc_a7_pf13 &fmc_a8_pf14
|
||||||
|
&fmc_a9_pf15 &fmc_a10_pg0 &fmc_a11_pg1
|
||||||
|
&fmc_a14_pg4 &fmc_a15_pg5 &fmc_d0_pd14 &fmc_d1_pd15
|
||||||
|
&fmc_d2_pd0 &fmc_d3_pd1 &fmc_d4_pe7 &fmc_d5_pe8 &fmc_d6_pe9
|
||||||
|
&fmc_d7_pe10 &fmc_d8_pe11 &fmc_d9_pe12 &fmc_d10_pe13
|
||||||
|
&fmc_d11_pe14 &fmc_d12_pe15 &fmc_d13_pd8 &fmc_d14_pd9
|
||||||
|
&fmc_d15_pd10>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
sdram {
|
||||||
|
status = "okay";
|
||||||
|
power-up-delay = <100>;
|
||||||
|
num-auto-refresh = <8>;
|
||||||
|
mode-register = <0x220>;
|
||||||
|
refresh-rate = <0x603>;
|
||||||
|
bank@1 {
|
||||||
|
reg = <1>;
|
||||||
|
st,sdram-control = <STM32_FMC_SDRAM_NC_8
|
||||||
|
STM32_FMC_SDRAM_NR_12
|
||||||
|
STM32_FMC_SDRAM_MWID_16
|
||||||
|
STM32_FMC_SDRAM_NB_4
|
||||||
|
STM32_FMC_SDRAM_CAS_3
|
||||||
|
STM32_FMC_SDRAM_SDCLK_PERIOD_2
|
||||||
|
STM32_FMC_SDRAM_RBURST_ENABLE
|
||||||
|
STM32_FMC_SDRAM_RPIPE_0>;
|
||||||
|
st,sdram-timing = <2 7 4 7 2 2 2>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
<dc {
|
||||||
|
pinctrl-0 = <<dc_r0_pi15 <dc_r1_pj0 <dc_r2_pj1 <dc_r3_pj2
|
||||||
|
<dc_r4_pj3 <dc_r5_pj4 <dc_r6_pj5 <dc_r7_pj6
|
||||||
|
<dc_g0_pj7 <dc_g1_pj8 <dc_g2_pj9 <dc_g3_pj10
|
||||||
|
<dc_g4_pj11 <dc_g5_pk0 <dc_g6_pk1 <dc_g7_pk2
|
||||||
|
<dc_b0_pj12 <dc_b1_pj13 <dc_b2_pj14 <dc_b3_pj15
|
||||||
|
<dc_b4_pk3 <dc_b5_pk4 <dc_b6_pk5 <dc_b7_pk6
|
||||||
|
<dc_de_pk7 <dc_clk_pi14 <dc_hsync_pi10 <dc_vsync_pi9>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
|
||||||
|
disp-on-gpios = <&gpiod 7 GPIO_ACTIVE_HIGH>;
|
||||||
|
|
||||||
|
ext-sdram = <&sdram1>;
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
clocks = <&rcc STM32_CLOCK_BUS_APB3 0x00000008>,
|
||||||
|
<&rcc STM32_SRC_PLL3_R NO_SEL>;
|
||||||
|
|
||||||
|
width = <480>;
|
||||||
|
height = <272>;
|
||||||
|
pixel-format = <PANEL_PIXEL_FORMAT_RGB_565>;
|
||||||
|
display-timings {
|
||||||
|
compatible = "zephyr,panel-timing";
|
||||||
|
de-active = <1>;
|
||||||
|
pixelclk-active = <0>;
|
||||||
|
hsync-active = <0>;
|
||||||
|
vsync-active = <0>;
|
||||||
|
hsync-len = <1>;
|
||||||
|
vsync-len = <10>;
|
||||||
|
hback-porch = <43>;
|
||||||
|
vback-porch = <12>;
|
||||||
|
hfront-porch = <8>;
|
||||||
|
vfront-porch = <4>;
|
||||||
|
};
|
||||||
|
def-back-color-red = <0xFF>;
|
||||||
|
def-back-color-green = <0xFF>;
|
||||||
|
def-back-color-blue = <0xFF>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&sdmmc1 {
|
||||||
|
pinctrl-0 = <&sdmmc1_d0_pc8
|
||||||
|
&sdmmc1_d1_pc9
|
||||||
|
&sdmmc1_d2_pc10
|
||||||
|
&sdmmc1_d3_pc11
|
||||||
|
&sdmmc1_ck_pc12
|
||||||
|
&sdmmc1_cmd_pd2>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
cd-gpios = <&gpiog 7 GPIO_ACTIVE_LOW>;
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
disk {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&flash0 {
|
||||||
|
partitions {
|
||||||
|
compatible = "fixed-partitions";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
/* 128KB for bootloader */
|
||||||
|
boot_partition: partition@0 {
|
||||||
|
label = "mcuboot";
|
||||||
|
reg = <0x00000000 DT_SIZE_K(128)>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
/* storage: 128KB for settings */
|
||||||
|
storage_partition: partition@20000 {
|
||||||
|
label = "storage";
|
||||||
|
reg = <0x00020000 DT_SIZE_K(128)>;
|
||||||
|
};
|
||||||
|
|
||||||
|
/* application image slot: 256KB */
|
||||||
|
slot0_partition: partition@40000 {
|
||||||
|
label = "image-0";
|
||||||
|
reg = <0x00040000 DT_SIZE_K(256)>;
|
||||||
|
};
|
||||||
|
|
||||||
|
/* backup slot: 256KB */
|
||||||
|
slot1_partition: partition@80000 {
|
||||||
|
label = "image-1";
|
||||||
|
reg = <0x00080000 DT_SIZE_K(256)>;
|
||||||
|
};
|
||||||
|
|
||||||
|
/* swap slot: 128KB */
|
||||||
|
scratch_partition: partition@c0000 {
|
||||||
|
label = "image-scratch";
|
||||||
|
reg = <0x000c0000 DT_SIZE_K(128)>;
|
||||||
|
};
|
||||||
|
|
||||||
|
};
|
||||||
|
};
|
||||||
21
boards/witte/linum/linum.yaml
Normal file
21
boards/witte/linum/linum.yaml
Normal file
|
|
@ -0,0 +1,21 @@
|
||||||
|
identifier: linum
|
||||||
|
name: Linum
|
||||||
|
type: mcu
|
||||||
|
arch: arm
|
||||||
|
toolchain:
|
||||||
|
- zephyr
|
||||||
|
- gnuarmemb
|
||||||
|
- xtools
|
||||||
|
ram: 512
|
||||||
|
flash: 2048
|
||||||
|
supported:
|
||||||
|
- uart
|
||||||
|
- gpio
|
||||||
|
- counter
|
||||||
|
- i2c
|
||||||
|
- pwm
|
||||||
|
- netif:eth
|
||||||
|
- spi
|
||||||
|
- usb_device
|
||||||
|
- can
|
||||||
|
vendor: witte
|
||||||
23
boards/witte/linum/linum_defconfig
Normal file
23
boards/witte/linum/linum_defconfig
Normal file
|
|
@ -0,0 +1,23 @@
|
||||||
|
# SPDX-License-Identifier: Apache-2.0
|
||||||
|
|
||||||
|
# Enable MPU
|
||||||
|
CONFIG_ARM_MPU=y
|
||||||
|
|
||||||
|
# Enable HW stack protection
|
||||||
|
CONFIG_HW_STACK_PROTECTION=y
|
||||||
|
|
||||||
|
# Enable UART
|
||||||
|
CONFIG_SERIAL=y
|
||||||
|
|
||||||
|
# Console
|
||||||
|
CONFIG_CONSOLE=y
|
||||||
|
CONFIG_UART_CONSOLE=y
|
||||||
|
|
||||||
|
# Enable GPIO
|
||||||
|
CONFIG_GPIO=y
|
||||||
|
|
||||||
|
# Enable clocks
|
||||||
|
CONFIG_CLOCK_CONTROL=y
|
||||||
|
|
||||||
|
# enable pin controller
|
||||||
|
CONFIG_PINCTRL=y
|
||||||
21
boards/witte/linum/support/openocd.cfg
Normal file
21
boards/witte/linum/support/openocd.cfg
Normal file
|
|
@ -0,0 +1,21 @@
|
||||||
|
source [find board/st_nucleo_h743zi.cfg]
|
||||||
|
|
||||||
|
reset_config srst_only srst_nogate connect_assert_srst
|
||||||
|
|
||||||
|
$_CHIPNAME.cpu0 configure -event gdb-attach {
|
||||||
|
echo "Debugger attaching: halting execution"
|
||||||
|
gdb_breakpoint_override hard
|
||||||
|
}
|
||||||
|
|
||||||
|
$_CHIPNAME.cpu0 configure -event gdb-detach {
|
||||||
|
echo "Debugger detaching: resuming execution"
|
||||||
|
resume
|
||||||
|
}
|
||||||
|
|
||||||
|
# Due to the use of connect_assert_srst, running gdb requires
|
||||||
|
# to reset halt just after openocd init.
|
||||||
|
rename init old_init
|
||||||
|
proc init {} {
|
||||||
|
old_init
|
||||||
|
reset halt
|
||||||
|
}
|
||||||
|
|
@ -732,6 +732,7 @@ winbond Winbond Electronics corp.
|
||||||
winsen Zhengzhou Winsen Electronics Technology Co., Ltd.
|
winsen Zhengzhou Winsen Electronics Technology Co., Ltd.
|
||||||
winstar Winstar Display Corp.
|
winstar Winstar Display Corp.
|
||||||
wits Shenzhen Merrii Technology Co., Ltd. (WITS)
|
wits Shenzhen Merrii Technology Co., Ltd. (WITS)
|
||||||
|
witte Witte Technology
|
||||||
wiznet WIZnet Co., Ltd.
|
wiznet WIZnet Co., Ltd.
|
||||||
wlf Wolfson Microelectronics
|
wlf Wolfson Microelectronics
|
||||||
wm Wondermedia Technologies, Inc.
|
wm Wondermedia Technologies, Inc.
|
||||||
|
|
|
||||||
Loading…
Add table
Add a link
Reference in a new issue