michaelh/zephyr
1
0
Fork 0
Code Releases Activity

checkpatch: error - switch_case_indent_level

Browse source 
Change-Id: I9cbd6ab80b0c0f170626bb1c6b2d07498038fb8f
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This commit is contained in:
Dan Kalowsky 2015-10-14 13:29:17 -07:00 • committed by Anas Nashif
commit 3bc4039601
6 changed files with 220 additions and 220 deletions
Download patch file Download diff file Expand all files Collapse all files

214
drivers/gpio/gpio_pcal9535a.c
View file

@ -185,29 +185,29 @@ static int _setup_pin_dir(struct device *dev, int access_op,
int ret;
switch (access_op) {
case GPIO_ACCESS_BY_PIN:
bit_mask = 1 << pin;
case GPIO_ACCESS_BY_PIN:
bit_mask = 1 << pin;
/* Config 0 == output, 1 == input */
if ((flags & GPIO_DIR_MASK) == GPIO_DIR_IN) {
new_value = 1 << pin;
}
/* Config 0 == output, 1 == input */
if ((flags & GPIO_DIR_MASK) == GPIO_DIR_IN) {
new_value = 1 << pin;
}
port->all &= ~bit_mask;
port->all |= new_value;
port->all &= ~bit_mask;
port->all |= new_value;
break;
case GPIO_ACCESS_BY_PORT:
/* Config 0 == output, 1 == input */
if ((flags & GPIO_DIR_MASK) == GPIO_DIR_IN) {
port->all = 0xFFFF;
} else {
port->all = 0x0;
}
break;
default:
ret = DEV_INVALID_OP;
goto done;
break;
case GPIO_ACCESS_BY_PORT:
/* Config 0 == output, 1 == input */
if ((flags & GPIO_DIR_MASK) == GPIO_DIR_IN) {
port->all = 0xFFFF;
} else {
port->all = 0x0;
}
break;
default:
ret = DEV_INVALID_OP;
goto done;
}
ret = _write_port_regs(dev, REG_CONF_PORT0, port);
@ -246,29 +246,29 @@ static int _setup_pin_pullupdown(struct device *dev, int access_op,
/* Setup pin pull up or pull down */
port = &drv_data->reg_cache.pud_sel;
switch (access_op) {
case GPIO_ACCESS_BY_PIN:
bit_mask = 1 << pin;
case GPIO_ACCESS_BY_PIN:
bit_mask = 1 << pin;
/* pull down == 0, pull up == 1*/
if ((flags & GPIO_PUD_MASK) == GPIO_PUD_PULL_UP) {
new_value = 1 << pin;
}
/* pull down == 0, pull up == 1*/
if ((flags & GPIO_PUD_MASK) == GPIO_PUD_PULL_UP) {
new_value = 1 << pin;
}
port->all &= ~bit_mask;
port->all |= new_value;
port->all &= ~bit_mask;
port->all |= new_value;
break;
case GPIO_ACCESS_BY_PORT:
/* pull down == 0, pull up == 1*/
if ((flags & GPIO_PUD_MASK) == GPIO_PUD_PULL_UP) {
port->all = 0xFFFF;
} else {
port->all = 0x0;
}
break;
default:
ret = DEV_INVALID_OP;
goto done;
break;
case GPIO_ACCESS_BY_PORT:
/* pull down == 0, pull up == 1*/
if ((flags & GPIO_PUD_MASK) == GPIO_PUD_PULL_UP) {
port->all = 0xFFFF;
} else {
port->all = 0x0;
}
break;
default:
ret = DEV_INVALID_OP;
goto done;
}
ret = _write_port_regs(dev, REG_PUD_SEL_PORT0, port);
@ -280,27 +280,27 @@ en_dis:
/* enable/disable pull up/down */
port = &drv_data->reg_cache.pud_en;
switch (access_op) {
case GPIO_ACCESS_BY_PIN:
bit_mask = 1 << pin;
case GPIO_ACCESS_BY_PIN:
bit_mask = 1 << pin;
if ((flags & GPIO_PUD_MASK) != GPIO_PUD_NORMAL) {
new_value = 1 << pin;
}
if ((flags & GPIO_PUD_MASK) != GPIO_PUD_NORMAL) {
new_value = 1 << pin;
}
port->all &= ~bit_mask;
port->all |= new_value;
port->all &= ~bit_mask;
port->all |= new_value;
break;
case GPIO_ACCESS_BY_PORT:
if ((flags & GPIO_PUD_MASK) != GPIO_PUD_NORMAL) {
port->all = 0xFFFF;
} else {
port->all = 0x0;
}
break;
default:
ret = DEV_INVALID_OP;
goto done;
break;
case GPIO_ACCESS_BY_PORT:
if ((flags & GPIO_PUD_MASK) != GPIO_PUD_NORMAL) {
port->all = 0xFFFF;
} else {
port->all = 0x0;
}
break;
default:
ret = DEV_INVALID_OP;
goto done;
}
ret = _write_port_regs(dev, REG_PUD_EN_PORT0, port);
@ -330,29 +330,29 @@ static int _setup_pin_polarity(struct device *dev, int access_op,
int ret;
switch (access_op) {
case GPIO_ACCESS_BY_PIN:
bit_mask = 1 << pin;
case GPIO_ACCESS_BY_PIN:
bit_mask = 1 << pin;
/* normal == 0, invert == 1 */
if ((flags & GPIO_POL_MASK) == GPIO_POL_INV) {
new_value = 1 << pin;
}
/* normal == 0, invert == 1 */
if ((flags & GPIO_POL_MASK) == GPIO_POL_INV) {
new_value = 1 << pin;
}
port->all &= ~bit_mask;
port->all |= new_value;
port->all &= ~bit_mask;
port->all |= new_value;
break;
case GPIO_ACCESS_BY_PORT:
/* normal == 0, invert == 1 */
if ((flags & GPIO_POL_MASK) == GPIO_POL_INV) {
port->all = 0xFFFF;
} else {
port->all = 0x0;
}
break;
default:
ret = DEV_INVALID_OP;
goto done;
break;
case GPIO_ACCESS_BY_PORT:
/* normal == 0, invert == 1 */
if ((flags & GPIO_POL_MASK) == GPIO_POL_INV) {
port->all = 0xFFFF;
} else {
port->all = 0x0;
}
break;
default:
ret = DEV_INVALID_OP;
goto done;
}
ret = _write_port_regs(dev, REG_POL_INV_PORT0, port);
@ -440,32 +440,32 @@ static int gpio_pcal9535a_write(struct device *dev, int access_op,
/* Invert input value for pins configurated as active low. */
switch (access_op) {
case GPIO_ACCESS_BY_PIN:
bit_mask = 1 << pin;
case GPIO_ACCESS_BY_PIN:
bit_mask = 1 << pin;
new_value = (value << pin) & bit_mask;
new_value ^= (drv_data->out_pol_inv & bit_mask);
new_value &= bit_mask;
new_value = (value << pin) & bit_mask;
new_value ^= (drv_data->out_pol_inv & bit_mask);
new_value &= bit_mask;
port->all &= ~bit_mask;
port->all |= new_value;
port->all &= ~bit_mask;
port->all |= new_value;
break;
case GPIO_ACCESS_BY_PORT:
port->all = value;
bit_mask = drv_data->out_pol_inv;
break;
case GPIO_ACCESS_BY_PORT:
port->all = value;
bit_mask = drv_data->out_pol_inv;
new_value = value & bit_mask;
new_value ^= drv_data->out_pol_inv;
new_value &= bit_mask;
new_value = value & bit_mask;
new_value ^= drv_data->out_pol_inv;
new_value &= bit_mask;
port->all &= ~bit_mask;
port->all |= new_value;
port->all &= ~bit_mask;
port->all |= new_value;
break;
default:
ret = DEV_INVALID_OP;
goto done;
break;
default:
ret = DEV_INVALID_OP;
goto done;
}
ret = _write_port_regs(dev, REG_OUTPUT_PORT0, port);
@ -500,15 +500,15 @@ static int gpio_pcal9535a_read(struct device *dev, int access_op,
}
switch (access_op) {
case GPIO_ACCESS_BY_PIN:
*value = (buf.all >> pin) & 0x01;
break;
case GPIO_ACCESS_BY_PORT:
*value = buf.all;
break;
default:
ret = DEV_INVALID_OP;
break;
case GPIO_ACCESS_BY_PIN:
*value = (buf.all >> pin) & 0x01;
break;
case GPIO_ACCESS_BY_PORT:
*value = buf.all;
break;
default:
ret = DEV_INVALID_OP;
break;
}
done: