michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: nxp: frdm_mcxn947: documentation fixes

Browse source 
Correct a few issues with the documentation that were causing rendering
issues, as well as the following changes:
- added blurb to debug section clarifying that the default debugger
  firmware supports LinkServer
- updated serial terminal output with board name given when building
  with HWMv2

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit is contained in:
Daniel DeGrasse 2024-03-25 16:48:54 -05:00 • committed by Anas Nashif
commit 35e15b522e
1 changed files with 10 additions and 8 deletions
Download patch file Download diff file Expand all files Collapse all files

18
boards/nxp/frdm_mcxn947/doc/index.rst
View file

@ -70,10 +70,10 @@ Targets available
==================
The default configuration file
zephyr_file:`boards/nxp/frdm_mcxn947/frdm_mcxn947_mcxn947_cpu0_defconfig`
:zephyr_file:`boards/nxp/frdm_mcxn947/frdm_mcxn947_mcxn947_cpu0_defconfig`
only enables the first core.
Other hardware features are not currently supported by the port.`
Other hardware features are not currently supported by the port.
Connections and IOs
===================
@ -116,10 +116,12 @@ configured by default to use the MCU-Link CMSIS-DAP Onboard Debug Probe.
Using LinkServer
----------------
Linkserver is the default runner for this board. Follow the instructions in
:ref:`mcu-link-cmsis-onboard-debug-probe` to progtam the MCU-Link firmware.
This only needs to be done if the default onboard debug circuit firmware was changed.
To put the board in ``DFU mode`` to program the firmware, short jumper J21.
Linkserver is the default runner for this board, and supports the factory
default MCU-Link firmware. Follow the instructions in
:ref:`mcu-link-cmsis-onboard-debug-probe` to reprogram the default MCU-Link
firmware. This only needs to be done if the default onboard debug circuit
firmware was changed. To put the board in ``DFU mode`` to program the firmware,
short jumper J21.
Using J-Link
------------
@ -164,7 +166,7 @@ see the following message in the terminal:
.. code-block:: console
*** Booting Zephyr OS build v3.6.0-479-g91faa20c6741 ***
Hello World! frdm_mcxn947
Hello World! frdm_mcxn947/mcxn947/cpu0
Debugging
=========
@ -182,7 +184,7 @@ should see the following message in the terminal:
.. code-block:: console
*** Booting Zephyr OS build v3.6.0-479-g91faa20c6741 ***
Hello World! frdm_mcxn947
Hello World! frdm_mcxn947/mcxn947/cpu0
.. _MCX-N947 SoC Website:
https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/mcx-arm-cortex-m/mcx-n-series-microcontrollers/mcx-n94x-54x-highly-integrated-multicore-mcus-with-on-chip-accelerators-intelligent-peripherals-and-advanced-security:MCX-N94X-N54X