diff --git a/drivers/i2c/CMakeLists.txt b/drivers/i2c/CMakeLists.txt
index 675c286ff75..b755f941a99 100644
--- a/drivers/i2c/CMakeLists.txt
+++ b/drivers/i2c/CMakeLists.txt
@@ -11,6 +11,7 @@ zephyr_library_sources_ifdef(CONFIG_I2C_GPIO		i2c_gpio.c)
 zephyr_library_sources_ifdef(CONFIG_I2C_IMX		i2c_imx.c)
 zephyr_library_sources_ifdef(CONFIG_I2C_XEC		i2c_mchp_xec.c)
 zephyr_library_sources_ifdef(CONFIG_I2C_MCUX		i2c_mcux.c)
+zephyr_library_sources_ifdef(CONFIG_I2C_MCUX_FLEXCOMM	i2c_mcux_flexcomm.c)
 zephyr_library_sources_ifdef(CONFIG_I2C_MCUX_LPI2C	i2c_mcux_lpi2c.c)
 zephyr_library_sources_ifdef(CONFIG_NRFX_TWI		i2c_nrfx_twi.c)
 zephyr_library_sources_ifdef(CONFIG_NRFX_TWIM		i2c_nrfx_twim.c)
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index d176637d938..1c798307802 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -98,6 +98,12 @@ config I2C_MCUX
 	help
 	  Enable the mcux I2C driver.
 
+config I2C_MCUX_FLEXCOMM
+	bool "MCUX FLEXCOMM I2C driver"
+	depends on HAS_MCUX_FLEXCOMM
+	help
+	  Enable the mcux flexcomm i2c driver.
+
 config I2C_MCUX_LPI2C
 	bool "MCUX LPI2C driver"
 	depends on HAS_MCUX_LPI2C && CLOCK_CONTROL
diff --git a/drivers/i2c/i2c_mcux_flexcomm.c b/drivers/i2c/i2c_mcux_flexcomm.c
new file mode 100644
index 00000000000..e1cd5e8a7ba
--- /dev/null
+++ b/drivers/i2c/i2c_mcux_flexcomm.c
@@ -0,0 +1,225 @@
+/*
+ * Copyright (c) 2016 Freescale Semiconductor, Inc.
+ * Copyright (c) 2019 NXP
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#define DT_DRV_COMPAT nxp_lpc_i2c
+
+#include <errno.h>
+#include <drivers/i2c.h>
+#include <drivers/clock_control.h>
+#include <fsl_i2c.h>
+
+#include <logging/log.h>
+LOG_MODULE_REGISTER(mcux_flexcomm);
+
+#include "i2c-priv.h"
+
+struct mcux_flexcomm_config {
+	I2C_Type *base;
+	void (*irq_config_func)(struct device *dev);
+	u32_t bitrate;
+};
+
+struct mcux_flexcomm_data {
+	i2c_master_handle_t handle;
+	struct k_sem device_sync_sem;
+	status_t callback_status;
+};
+
+static int mcux_flexcomm_configure(struct device *dev, u32_t dev_config_raw)
+{
+	const struct mcux_flexcomm_config *config = dev->config->config_info;
+	I2C_Type *base = config->base;
+	u32_t clock_freq;
+	u32_t baudrate;
+
+	if (!(I2C_MODE_MASTER & dev_config_raw)) {
+		return -EINVAL;
+	}
+
+	if (I2C_ADDR_10_BITS & dev_config_raw) {
+		return -EINVAL;
+	}
+
+	switch (I2C_SPEED_GET(dev_config_raw)) {
+	case I2C_SPEED_STANDARD:
+		baudrate = KHZ(100);
+		break;
+	case I2C_SPEED_FAST:
+		baudrate = MHZ(1);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	clock_freq = MHZ(12);
+
+	I2C_MasterSetBaudRate(base, baudrate, clock_freq);
+
+	return 0;
+}
+
+static void mcux_flexcomm_master_transfer_callback(I2C_Type *base,
+		i2c_master_handle_t *handle, status_t status, void *userData)
+{
+	struct device *dev = userData;
+	struct mcux_flexcomm_data *data = dev->driver_data;
+
+	ARG_UNUSED(handle);
+	ARG_UNUSED(base);
+
+	data->callback_status = status;
+	k_sem_give(&data->device_sync_sem);
+}
+
+static u32_t mcux_flexcomm_convert_flags(int msg_flags)
+{
+	u32_t flags = 0U;
+
+	if (!(msg_flags & I2C_MSG_STOP)) {
+		flags |= kI2C_TransferNoStopFlag;
+	}
+
+	if (msg_flags & I2C_MSG_RESTART) {
+		flags |= kI2C_TransferRepeatedStartFlag;
+	}
+
+	return flags;
+}
+
+static int mcux_flexcomm_transfer(struct device *dev, struct i2c_msg *msgs,
+		u8_t num_msgs, u16_t addr)
+{
+	const struct mcux_flexcomm_config *config = dev->config->config_info;
+	struct mcux_flexcomm_data *data = dev->driver_data;
+	I2C_Type *base = config->base;
+	i2c_master_transfer_t transfer;
+	status_t status;
+
+	/* Iterate over all the messages */
+	for (int i = 0; i < num_msgs; i++) {
+		if (I2C_MSG_ADDR_10_BITS & msgs->flags) {
+			return -ENOTSUP;
+		}
+
+		/* Initialize the transfer descriptor */
+		transfer.flags = mcux_flexcomm_convert_flags(msgs->flags);
+
+		/* Prevent the controller to send a start condition between
+		 * messages, except if explicitly requested.
+		 */
+		if (i != 0 && !(msgs->flags & I2C_MSG_RESTART)) {
+			transfer.flags |= kI2C_TransferNoStartFlag;
+		}
+
+		transfer.slaveAddress = addr;
+		transfer.direction = (msgs->flags & I2C_MSG_READ)
+			? kI2C_Read : kI2C_Write;
+		transfer.subaddress = 0;
+		transfer.subaddressSize = 0;
+		transfer.data = msgs->buf;
+		transfer.dataSize = msgs->len;
+
+		/* Start the transfer */
+		status = I2C_MasterTransferNonBlocking(base,
+				&data->handle, &transfer);
+
+		/* Return an error if the transfer didn't start successfully
+		 * e.g., if the bus was busy
+		 */
+		if (status != kStatus_Success) {
+			return -EIO;
+		}
+
+		/* Wait for the transfer to complete */
+		k_sem_take(&data->device_sync_sem, K_FOREVER);
+
+		/* Return an error if the transfer didn't complete
+		 * successfully. e.g., nak, timeout, lost arbitration
+		 */
+		if (data->callback_status != kStatus_Success) {
+			return -EIO;
+		}
+
+		/* Move to the next message */
+		msgs++;
+	}
+
+	return 0;
+}
+
+static void mcux_flexcomm_isr(void *arg)
+{
+	struct device *dev = (struct device *)arg;
+	const struct mcux_flexcomm_config *config = dev->config->config_info;
+	struct mcux_flexcomm_data *data = dev->driver_data;
+	I2C_Type *base = config->base;
+
+	I2C_MasterTransferHandleIRQ(base, &data->handle);
+}
+
+static int mcux_flexcomm_init(struct device *dev)
+{
+	const struct mcux_flexcomm_config *config = dev->config->config_info;
+	struct mcux_flexcomm_data *data = dev->driver_data;
+	I2C_Type *base = config->base;
+	u32_t clock_freq, bitrate_cfg;
+	i2c_master_config_t master_config;
+	int error;
+
+	k_sem_init(&data->device_sync_sem, 0, UINT_MAX);
+
+	clock_freq = MHZ(12);
+
+	I2C_MasterGetDefaultConfig(&master_config);
+	I2C_MasterInit(base, &master_config, clock_freq);
+	I2C_MasterTransferCreateHandle(base, &data->handle,
+			mcux_flexcomm_master_transfer_callback, dev);
+
+	bitrate_cfg = i2c_map_dt_bitrate(config->bitrate);
+
+	error = mcux_flexcomm_configure(dev, I2C_MODE_MASTER | bitrate_cfg);
+	if (error) {
+		return error;
+	}
+
+	config->irq_config_func(dev);
+
+	return 0;
+}
+
+static const struct i2c_driver_api mcux_flexcomm_driver_api = {
+	.configure = mcux_flexcomm_configure,
+	.transfer = mcux_flexcomm_transfer,
+};
+
+#define I2C_MCUX_FLEXCOMM_DEVICE(id)					\
+	static void mcux_flexcomm_config_func_##id(struct device *dev);	\
+	static const struct mcux_flexcomm_config mcux_flexcomm_config_##id = {	\
+		.base = (I2C_Type *) DT_INST_REG_ADDR(id),		\
+		.irq_config_func = mcux_flexcomm_config_func_##id,	\
+		.bitrate = DT_INST_PROP(id, clock_frequency),		\
+	};								\
+	static struct mcux_flexcomm_data mcux_flexcomm_data_##id;	\
+	DEVICE_AND_API_INIT(mcux_flexcomm_##id,				\
+			    DT_INST_LABEL(id),				\
+			    &mcux_flexcomm_init,			\
+			    &mcux_flexcomm_data_##id,			\
+			    &mcux_flexcomm_config_##id,			\
+			    POST_KERNEL,				\
+			    CONFIG_KERNEL_INIT_PRIORITY_DEVICE,		\
+			    &mcux_flexcomm_driver_api);			\
+	static void mcux_flexcomm_config_func_##id(struct device *dev)	\
+	{								\
+		IRQ_CONNECT(DT_INST_IRQN(id),				\
+			    DT_INST_IRQ(id, priority),			\
+			    mcux_flexcomm_isr,				\
+			    DEVICE_GET(mcux_flexcomm_##id),		\
+			    0);						\
+		irq_enable(DT_INST_IRQN(id));				\
+	}								\
+
+DT_INST_FOREACH(I2C_MCUX_FLEXCOMM_DEVICE);
diff --git a/west.yml b/west.yml
index ab3ed48c33b..fb284f65481 100644
--- a/west.yml
+++ b/west.yml
@@ -92,7 +92,7 @@ manifest:
       revision: 1080094bc246357c6c35e80e8b2d5d0ce7e0d963
       path: tools/net-tools
     - name: hal_nxp
-      revision: 2f896f74a5fc7220546cc23b50351506cd72ea96
+      revision: 87850e41cd48e4472adbae03c9623ea349255d48
       path: modules/hal/nxp
     - name: open-amp
       revision: 5720c73ef3bd885824b2d2184f606443e03f73c4