michaelh/zephyr
1
0
Fork 0
Code Releases Activity

doc: Moved the X86 Emulation info to wiki.

Browse source 
Moved the QEMU x86 information from qemu_x86.rst
to the Zephyr wiki. Also corrected a typo in
qemu_cortex_m3.rst.

Change-Id: Ic7ac8a1ab59018f25466c9031ce465973d6bdd8f
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
This commit is contained in:
Evan Couzens 2016-06-23 13:31:31 -07:00 • committed by Inaky Perez-Gonzalez
commit 2f380c2996
2 changed files with 3 additions and 62 deletions
Download patch file Download diff file Expand all files Collapse all files

2
doc/board/qemu_cortex_m3.rst
View file

@ -3,6 +3,6 @@
ARM Cortex-M3 Emulation (QEMU) ARM Cortex-M3 Emulation (QEMU)
############################## ##############################
The board documentation for the OLIMEXINO-STM32 has been moved to the Zephyr project wiki: The board documentation for the QEMU Cortex M3 has been moved to the Zephyr project wiki:
https://wiki.zephyrproject.org/view/ARM_Cortex-M3_Emulation_(QEMU) https://wiki.zephyrproject.org/view/ARM_Cortex-M3_Emulation_(QEMU)

63
doc/board/qemu_x86.rst
View file

@ -3,65 +3,6 @@
X86 Emulation (QEMU) X86 Emulation (QEMU)
#################### ####################
Overview The board documentation for the QEMU x86 has been moved to the Zephyr project wiki:
********
The Zephyr Kernel uses the qemu_x86 board configuration to emulate pentium-class https://wiki.zephyrproject.org/view/X86_Emulation_(QEMU)
systems running on QEMU.
It provides support for an x86 Minute IA CPU and the following devices:
* HPET
* Advanced Programmable Interrupt Controller (APIC)
* NS16550 UART
.. note::
This board configuration makes no claims about its suitability for use
with actual galileo hardware, or any other hardware.
The qemu_x86 board configuration has been tested on QEMU 2.1.
Supported Features
******************
The qemu_x86 board configuration supports the following hardware features:
+--------------+------------+-----------------------+
| Interface | Controller | Driver/Component |
+==============+============+=======================+
| HPET | on-chip | system clock |
+--------------+------------+-----------------------+
| APIC | on-chip | interrupt controller |
+--------------+------------+-----------------------+
| NS16550 | on-chip | serial port |
| UART | | |
+--------------+------------+-----------------------+
The kernel currently does not support other hardware features on this platform.
HPET System Clock Support
=========================
The qemu_x86 board configuration uses an HPET clock frequency of 25 MHz.
Serial Port
===========
The qemu_x86 board configuration uses a single serial communication channel that
uses the NS16550 serial driver operating in polling mode. To override, enable
the UART_INTERRUPT_DRIVEN Kconfig option, which allows the system to be
interrupt-driven.
Known Problems or Limitations
*****************************
The following platform features are unsupported:
* Isolated Memory Regions
* Serial port in Direct Memory Access (DMA) mode
* Serial Peripheral Interface (SPI) flash
* General-Purpose Input/Output (GPIO)
* Inter-Integrated Circuit (I2C)
* Ethernet
* Supervisor Mode Execution Protection (SMEP)