michaelh/zephyr
1
0
Fork 0
Code Releases Activity

arm: dts: Cleanup HAS_DTS

Browse source 
Now that all ARM platforms have a device tree we can move selecting of
HAS_DTS up and remove any !HAS_DTS cases, as well as setting in all the
defconfigs.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit is contained in:
Kumar Gala 2017-05-11 15:37:01 -05:00 • committed by Anas Nashif
commit 26811defc7
37 changed files with 1 additions and 129 deletions
Download patch file Download diff file Expand all files Collapse all files

1
arch/arm/core/Kconfig
View file

@ -21,6 +21,7 @@ config CPU_CORTEX_M
select ARCH_HAS_CUSTOM_SWAP_TO_MAIN select ARCH_HAS_CUSTOM_SWAP_TO_MAIN
select HAS_CMSIS select HAS_CMSIS
select HAS_FLASH_LOAD_OFFSET select HAS_FLASH_LOAD_OFFSET
select HAS_DTS
help help
This option signifies the use of a CPU of the Cortex-M family. This option signifies the use of a CPU of the Cortex-M family.

41
arch/arm/core/cortex_m/Kconfig
View file

@ -129,15 +129,6 @@ config STACK_ALIGN_DOUBLE_WORD
This is needed to conform to AAPCS, the procedure call standard for This is needed to conform to AAPCS, the procedure call standard for
the ARM. It wastes stack space. the ARM. It wastes stack space.
config NUM_IRQ_PRIO_BITS
int
#hidden option, implemented by board
help
Cortex-M chips can implement up to 8 bits of interrupt priorities,
for a maximum of 256 priorities. Most chips implement fewer than 8.
The board must define the correct value.
config RUNTIME_NMI config RUNTIME_NMI
bool bool
prompt "Attach an NMI handler at runtime" prompt "Attach an NMI handler at runtime"
@ -167,38 +158,6 @@ config FAULT_DUMP
config XIP config XIP
default y default y
config SRAM_SIZE
int "SRAM Size in kB"
depends on !HAS_DTS
help
This option specifies the size of the SRAM in kB. It is normally set by
the board's defconfig file and the user should generally avoid modifying
it via the menu configuration.
config SRAM_BASE_ADDRESS
hex "SRAM Base Address"
depends on !HAS_DTS
help
This option specifies the base address of the SRAM on the board. It is
normally set by the board's defconfig file and the user should generally
avoid modifying it via the menu configuration.
config FLASH_SIZE
int "Flash Size in kB"
depends on !HAS_DTS
help
This option specifies the size of the flash in kB. It is normally set by
the board's defconfig file and the user should generally avoid modifying
it via the menu configuration.
config FLASH_BASE_ADDRESS
hex "Flash Base Address"
depends on !HAS_DTS
help
This option specifies the base address of the flash on the board. It is
normally set by the board's defconfig file and the user should generally
avoid modifying it via the menu configuration.
endmenu endmenu
menu "ARM Cortex-M0/M0+/M3/M4/M7 options" menu "ARM Cortex-M0/M0+/M3/M4/M7 options"

3
boards/arm/96b_carbon/96b_carbon_defconfig
View file

@ -38,6 +38,3 @@ CONFIG_CLOCK_STM32_PLL_Q_DIVISOR=7
CONFIG_CLOCK_STM32_AHB_PRESCALER=1 CONFIG_CLOCK_STM32_AHB_PRESCALER=1
CONFIG_CLOCK_STM32_APB1_PRESCALER=2 CONFIG_CLOCK_STM32_APB1_PRESCALER=2
CONFIG_CLOCK_STM32_APB2_PRESCALER=1 CONFIG_CLOCK_STM32_APB2_PRESCALER=1
#enable DTS
CONFIG_HAS_DTS=y

3
boards/arm/96b_nitrogen/96b_nitrogen_defconfig
View file

@ -17,6 +17,3 @@ CONFIG_GPIO_AS_PINRESET=y
# bluetooth # bluetooth
CONFIG_BLUETOOTH=y CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_CONTROLLER=y CONFIG_BLUETOOTH_CONTROLLER=y
#enable DTS
CONFIG_HAS_DTS=y

3
boards/arm/arduino_101_ble/arduino_101_ble_defconfig
View file

@ -11,6 +11,3 @@ CONFIG_UART_NRF5=y
# bluetooth # bluetooth
CONFIG_BLUETOOTH=y CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_CONTROLLER=y CONFIG_BLUETOOTH_CONTROLLER=y
#enable DTS
CONFIG_HAS_DTS=y

1
boards/arm/arduino_due/arduino_due_defconfig
View file

@ -11,4 +11,3 @@ CONFIG_UART_ATMEL_SAM3=y
CONFIG_SOC_ATMEL_SAM3X_EXT_MAINCK=y CONFIG_SOC_ATMEL_SAM3X_EXT_MAINCK=y
CONFIG_PINMUX=y CONFIG_PINMUX=y
CONFIG_WATCHDOG=n CONFIG_WATCHDOG=n
CONFIG_HAS_DTS=y

3
boards/arm/bbc_microbit/bbc_microbit_defconfig
View file

@ -19,6 +19,3 @@ CONFIG_UART_CONSOLE=y
# bluetooth # bluetooth
CONFIG_BLUETOOTH=y CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_CONTROLLER=y CONFIG_BLUETOOTH_CONTROLLER=y
#enable DTS
CONFIG_HAS_DTS=y

3
boards/arm/cc3200_launchxl/cc3200_launchxl_defconfig
View file

@ -23,6 +23,3 @@ CONFIG_UART_CONSOLE=y
# Enable CC3200 SDK driver files # Enable CC3200 SDK driver files
CONFIG_CC3200SDK_ROM_DRIVERLIB=y CONFIG_CC3200SDK_ROM_DRIVERLIB=y
# Enable DTS parsing
CONFIG_HAS_DTS=y

3
boards/arm/cc3220sf_launchxl/cc3220sf_launchxl_defconfig
View file

@ -23,6 +23,3 @@ CONFIG_UART_CONSOLE=y
# Enable SimpleLink CC3220 SDK # Enable SimpleLink CC3220 SDK
CONFIG_HAS_CC3220SDK=y CONFIG_HAS_CC3220SDK=y
# Enable DTS parsing
CONFIG_HAS_DTS=y

3
boards/arm/curie_ble/curie_ble_defconfig
View file

@ -11,6 +11,3 @@ CONFIG_UART_NRF5=y
# bluetooth # bluetooth
CONFIG_BLUETOOTH=y CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_CONTROLLER=y CONFIG_BLUETOOTH_CONTROLLER=y
#enable DTS
CONFIG_HAS_DTS=y

3
boards/arm/disco_l475_iot1/disco_l475_iot1_defconfig
View file

@ -7,9 +7,6 @@ CONFIG_CORTEX_M_SYSTICK=y
# 80MHz system clock # 80MHz system clock
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=80000000 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=80000000
#enable DTS
CONFIG_HAS_DTS=y
# enable uart driver # enable uart driver
CONFIG_SERIAL=y CONFIG_SERIAL=y
CONFIG_UART_STM32=y CONFIG_UART_STM32=y

1
boards/arm/frdm_k64f/frdm_k64f_defconfig
View file

@ -9,4 +9,3 @@ CONFIG_CORTEX_M_SYSTICK=y
CONFIG_GPIO=y CONFIG_GPIO=y
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=120000000 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=120000000
CONFIG_OSC_EXTERNAL=y CONFIG_OSC_EXTERNAL=y
CONFIG_HAS_DTS=y

1
boards/arm/frdm_kl25z/frdm_kl25z_defconfig
View file

@ -9,4 +9,3 @@ CONFIG_CORTEX_M_SYSTICK=y
CONFIG_GPIO=y CONFIG_GPIO=y
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=48000000 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=48000000
CONFIG_OSC_LOW_POWER=y CONFIG_OSC_LOW_POWER=y
CONFIG_HAS_DTS=y

1
boards/arm/frdm_kw41z/frdm_kw41z_defconfig
View file

@ -9,4 +9,3 @@ CONFIG_CORTEX_M_SYSTICK=y
CONFIG_GPIO=y CONFIG_GPIO=y
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=40000000 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=40000000
CONFIG_OSC_EXTERNAL=y CONFIG_OSC_EXTERNAL=y
CONFIG_HAS_DTS=y

1
boards/arm/hexiwear_k64/hexiwear_k64_defconfig
View file

@ -9,4 +9,3 @@ CONFIG_CORTEX_M_SYSTICK=y
CONFIG_GPIO=y CONFIG_GPIO=y
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=120000000 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=120000000
CONFIG_OSC_LOW_POWER=y CONFIG_OSC_LOW_POWER=y
CONFIG_HAS_DTS=y

1
boards/arm/hexiwear_kw40z/hexiwear_kw40z_defconfig
View file

@ -9,4 +9,3 @@ CONFIG_PINMUX=y
CONFIG_GPIO=y CONFIG_GPIO=y
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=40000000 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=40000000
CONFIG_OSC_EXTERNAL=y CONFIG_OSC_EXTERNAL=y
CONFIG_HAS_DTS=y

3
boards/arm/mps2_an385/mps2_an385_defconfig
View file

@ -12,9 +12,6 @@ CONFIG_BOARD_MPS2_AN385=y
CONFIG_CORTEX_M_SYSTICK=y CONFIG_CORTEX_M_SYSTICK=y
CONFIG_RUNTIME_NMI=y CONFIG_RUNTIME_NMI=y
#DTS
CONFIG_HAS_DTS=y
# GPIOs # GPIOs
CONFIG_GPIO=y CONFIG_GPIO=y

3
boards/arm/nrf51_blenano/nrf51_blenano_defconfig
View file

@ -15,6 +15,3 @@ CONFIG_UART_CONSOLE=y
# bluetooth # bluetooth
CONFIG_BLUETOOTH=y CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_CONTROLLER=y CONFIG_BLUETOOTH_CONTROLLER=y
#enable DTS
CONFIG_HAS_DTS=y

3
boards/arm/nrf51_pca10028/nrf51_pca10028_defconfig
View file

@ -15,6 +15,3 @@ CONFIG_UART_CONSOLE=y
# bluetooth # bluetooth
CONFIG_BLUETOOTH=y CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_CONTROLLER=y CONFIG_BLUETOOTH_CONTROLLER=y
#enable DTS
CONFIG_HAS_DTS=y

3
boards/arm/nrf52840_pca10056/nrf52840_pca10056_defconfig
View file

@ -18,6 +18,3 @@ CONFIG_GPIO_AS_PINRESET=y
# bluetooth # bluetooth
CONFIG_BLUETOOTH=y CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_CONTROLLER=y CONFIG_BLUETOOTH_CONTROLLER=y
#enable DTS
CONFIG_HAS_DTS=y

3
boards/arm/nrf52_blenano2/nrf52_blenano2_defconfig
View file

@ -15,6 +15,3 @@ CONFIG_UART_CONSOLE=y
# bluetooth # bluetooth
CONFIG_BLUETOOTH=y CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_CONTROLLER=y CONFIG_BLUETOOTH_CONTROLLER=y
#enable DTS
CONFIG_HAS_DTS=y

3
boards/arm/nrf52_pca10040/nrf52_pca10040_defconfig
View file

@ -18,6 +18,3 @@ CONFIG_GPIO_AS_PINRESET=y
# bluetooth # bluetooth
CONFIG_BLUETOOTH=y CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_CONTROLLER=y CONFIG_BLUETOOTH_CONTROLLER=y
#enable DTS
CONFIG_HAS_DTS=y

3
boards/arm/nucleo_f103rb/nucleo_f103rb_defconfig
View file

@ -48,6 +48,3 @@ CONFIG_CLOCK_STM32F10X_APB2_PRESCALER=0
CONFIG_PWM=y CONFIG_PWM=y
CONFIG_PWM_STM32=y CONFIG_PWM_STM32=y
CONFIG_PWM_STM32_1=y CONFIG_PWM_STM32_1=y
#enable DTS
CONFIG_HAS_DTS=y

3
boards/arm/nucleo_f334r8/nucleo_f334r8_defconfig
View file

@ -54,6 +54,3 @@ CONFIG_CLOCK_STM32_PLL_MULTIPLIER=9
CONFIG_CLOCK_STM32_AHB_PRESCALER=1 CONFIG_CLOCK_STM32_AHB_PRESCALER=1
CONFIG_CLOCK_STM32_APB1_PRESCALER=2 CONFIG_CLOCK_STM32_APB1_PRESCALER=2
CONFIG_CLOCK_STM32_APB2_PRESCALER=1 CONFIG_CLOCK_STM32_APB2_PRESCALER=1
#enable DTS
CONFIG_HAS_DTS=y

3
boards/arm/nucleo_f401re/nucleo_f401re_defconfig
View file

@ -45,6 +45,3 @@ CONFIG_CLOCK_STM32_APB2_PRESCALER=1
CONFIG_PWM=y CONFIG_PWM=y
CONFIG_PWM_STM32=y CONFIG_PWM_STM32=y
CONFIG_PWM_STM32_2=y CONFIG_PWM_STM32_2=y
#enable DTS
CONFIG_HAS_DTS=y

3
boards/arm/nucleo_f411re/nucleo_f411re_defconfig
View file

@ -39,6 +39,3 @@ CONFIG_CLOCK_STM32_PLL_Q_DIVISOR=8
CONFIG_CLOCK_STM32_AHB_PRESCALER=1 CONFIG_CLOCK_STM32_AHB_PRESCALER=1
CONFIG_CLOCK_STM32_APB1_PRESCALER=2 CONFIG_CLOCK_STM32_APB1_PRESCALER=2
CONFIG_CLOCK_STM32_APB2_PRESCALER=1 CONFIG_CLOCK_STM32_APB2_PRESCALER=1
#enable DTS
CONFIG_HAS_DTS=y

3
boards/arm/nucleo_f413zh/nucleo_f413zh_defconfig
View file

@ -37,6 +37,3 @@ CONFIG_CLOCK_STM32_PLL_Q_DIVISOR=8
CONFIG_CLOCK_STM32_AHB_PRESCALER=1 CONFIG_CLOCK_STM32_AHB_PRESCALER=1
CONFIG_CLOCK_STM32_APB1_PRESCALER=2 CONFIG_CLOCK_STM32_APB1_PRESCALER=2
CONFIG_CLOCK_STM32_APB2_PRESCALER=1 CONFIG_CLOCK_STM32_APB2_PRESCALER=1
#enable DTS
CONFIG_HAS_DTS=y

3
boards/arm/nucleo_l432kc/nucleo_l432kc_defconfig
View file

@ -50,6 +50,3 @@ CONFIG_UART_CONSOLE_ON_DEV_NAME="UART_2"
CONFIG_PWM=y CONFIG_PWM=y
CONFIG_PWM_STM32=y CONFIG_PWM_STM32=y
CONFIG_PWM_STM32_2=y CONFIG_PWM_STM32_2=y
#enable DTS
CONFIG_HAS_DTS=y

3
boards/arm/nucleo_l476rg/nucleo_l476rg_defconfig
View file

@ -54,6 +54,3 @@ CONFIG_UART_CONSOLE_ON_DEV_NAME="UART_2"
CONFIG_PWM=y CONFIG_PWM=y
CONFIG_PWM_STM32=y CONFIG_PWM_STM32=y
CONFIG_PWM_STM32_2=y CONFIG_PWM_STM32_2=y
#enable DTS
CONFIG_HAS_DTS=y

3
boards/arm/olimexino_stm32/olimexino_stm32_defconfig
View file

@ -41,6 +41,3 @@ CONFIG_CLOCK_STM32F10X_AHB_PRESCALER=0
# APB1 clock must not exceed 36MHz limit # APB1 clock must not exceed 36MHz limit
CONFIG_CLOCK_STM32F10X_APB1_PRESCALER=2 CONFIG_CLOCK_STM32F10X_APB1_PRESCALER=2
CONFIG_CLOCK_STM32F10X_APB2_PRESCALER=0 CONFIG_CLOCK_STM32F10X_APB2_PRESCALER=0
#enable DTS
CONFIG_HAS_DTS=y

1
boards/arm/qemu_cortex_m3/qemu_cortex_m3_defconfig
View file

@ -7,4 +7,3 @@ CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y CONFIG_SERIAL=y
CONFIG_CORTEX_M_SYSTICK=y CONFIG_CORTEX_M_SYSTICK=y
CONFIG_UART_STELLARIS=y CONFIG_UART_STELLARIS=y
CONFIG_HAS_DTS=y

3
boards/arm/quark_se_c1000_ble/quark_se_c1000_ble_defconfig
View file

@ -11,6 +11,3 @@ CONFIG_UART_NRF5=y
# bluetooth # bluetooth
CONFIG_BLUETOOTH=y CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_CONTROLLER=y CONFIG_BLUETOOTH_CONTROLLER=y
#enable DTS
CONFIG_HAS_DTS=y

1
boards/arm/sam_e70_xplained/sam_e70_xplained_defconfig
View file

@ -14,4 +14,3 @@ CONFIG_SERIAL=y
CONFIG_USART_SAM=y CONFIG_USART_SAM=y
CONFIG_USART_SAM_PORT_1=y CONFIG_USART_SAM_PORT_1=y
CONFIG_BOARD_SAM_E70_XPLAINED=y CONFIG_BOARD_SAM_E70_XPLAINED=y
CONFIG_HAS_DTS=y

3
boards/arm/stm3210c_eval/stm3210c_eval_defconfig
View file

@ -58,6 +58,3 @@ CONFIG_CLOCK_STM32F10X_CONN_LINE_AHB_PRESCALER=0
# APB1 clock must not to exceed 36MHz limit # APB1 clock must not to exceed 36MHz limit
CONFIG_CLOCK_STM32F10X_CONN_LINE_APB1_PRESCALER=2 CONFIG_CLOCK_STM32F10X_CONN_LINE_APB1_PRESCALER=2
CONFIG_CLOCK_STM32F10X_CONN_LINE_APB2_PRESCALER=0 CONFIG_CLOCK_STM32F10X_CONN_LINE_APB2_PRESCALER=0
#enable DTS
CONFIG_HAS_DTS=y

3
boards/arm/stm32373c_eval/stm32373c_eval_defconfig
View file

@ -63,6 +63,3 @@ CONFIG_CLOCK_STM32_PLL_MULTIPLIER=9
CONFIG_CLOCK_STM32_AHB_PRESCALER=1 CONFIG_CLOCK_STM32_AHB_PRESCALER=1
CONFIG_CLOCK_STM32_APB1_PRESCALER=2 CONFIG_CLOCK_STM32_APB1_PRESCALER=2
CONFIG_CLOCK_STM32_APB2_PRESCALER=2 CONFIG_CLOCK_STM32_APB2_PRESCALER=2
#enable DTS
CONFIG_HAS_DTS=y

3
boards/arm/stm32_mini_a15/stm32_mini_a15_defconfig
View file

@ -37,6 +37,3 @@ CONFIG_CLOCK_STM32F10X_APB2_PRESCALER=0
# console # console
CONFIG_CONSOLE=y CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y CONFIG_UART_CONSOLE=y
#enable DTS
CONFIG_HAS_DTS=y

2
boards/arm/v2m_beetle/v2m_beetle_defconfig
View file

@ -33,5 +33,3 @@ CONFIG_UART_CONSOLE_ON_DEV_NAME="UART_1"
# Watchdog # Watchdog
CONFIG_WATCHDOG=y CONFIG_WATCHDOG=y
CONFIG_HAS_DTS=y