tests: drivers: spi: nordic: add fast SPI to overlays

SPIM12x have more capabilities than SPIM13x,
so it should be tested separately.

Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>

tests/drivers/spi/spi_controller_peripheral/boards/nrf54h20dk_nrf54h20_common.dtsi

@@ -52,7 +52,7 @@
 	owned-channels = <7>;
 };
 
-dut_spi: &spi130 {
+&spi130 {
 	compatible = "nordic,nrf-spim";
 	status = "okay";
 	pinctrl-0 = <&spi130_default_alt>;
@@ -63,6 +63,7 @@ dut_spi: &spi130 {
 	dut_spi_dt: test-spi-dev@0 {
 		compatible = "vnd,spi-device";
 		reg = <0>;
+		spi-max-frequency = <DT_FREQ_M(8)>;
 	};
 };
 

tests/drivers/spi/spi_controller_peripheral/boards/nrf54h20dk_nrf54h20_cpuapp.overlay

@@ -5,7 +5,7 @@
  */
 #include "nrf54h20dk_nrf54h20_common.dtsi"
 
-&dut_spi {
+&spi130 {
 	memory-regions = <&cpuapp_dma_region>;
 };
 

tests/drivers/spi/spi_controller_peripheral/boards/nrf54h20dk_nrf54h20_cpuapp_fast.overlay

@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2024 Nordic Semiconductor
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+&pinctrl {
+	spi121_default_alt: spi121_default_alt {
+		group1 {
+			psels = <NRF_PSEL(SPIM_SCK, 7, 2)>,
+				<NRF_PSEL(SPIM_MISO, 7, 0)>,
+				<NRF_PSEL(SPIM_MOSI, 7, 1)>;
+		};
+	};
+
+	spi121_sleep_alt: spi121_sleep_alt {
+		group1 {
+			psels = <NRF_PSEL(SPIM_SCK, 7, 2)>,
+				<NRF_PSEL(SPIM_MISO, 7, 0)>,
+				<NRF_PSEL(SPIM_MOSI, 7, 1)>;
+			low-power-enable;
+		};
+	};
+
+	spis131_default_alt: spis131_default_alt {
+		group1 {
+			psels = <NRF_PSEL(SPIS_SCK, 1, 0)>,
+				<NRF_PSEL(SPIS_MISO, 1, 9)>,
+				<NRF_PSEL(SPIS_MOSI, 1, 5)>,
+				<NRF_PSEL(SPIS_CSN, 0, 11)>;
+		};
+	};
+
+	spis131_sleep_alt: spis131_sleep_alt {
+		group1 {
+			psels = <NRF_PSEL(SPIS_SCK, 1, 0)>,
+				<NRF_PSEL(SPIS_MISO, 1, 9)>,
+				<NRF_PSEL(SPIS_MOSI, 1, 5)>,
+				<NRF_PSEL(SPIS_CSN, 0, 11)>;
+			low-power-enable;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&spi121 {
+	compatible = "nordic,nrf-spim";
+	status = "okay";
+	pinctrl-0 = <&spi121_default_alt>;
+	pinctrl-1 = <&spi121_sleep_alt>;
+	pinctrl-names = "default", "sleep";
+	overrun-character = <0x00>;
+	memory-regions = <&dma_fast_region>;
+	cs-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+	dut_spi_dt: test-spi-dev@0 {
+		compatible = "vnd,spi-device";
+		reg = <0>;
+		spi-max-frequency = <DT_FREQ_M(8)>;
+	};
+};
+
+dut_spis: &spi131 {
+	compatible = "nordic,nrf-spis";
+	status = "okay";
+	def-char = <0x00>;
+	pinctrl-0 = <&spis131_default_alt>;
+	pinctrl-1 = <&spis131_sleep_alt>;
+	pinctrl-names = "default", "sleep";
+	memory-regions = <&cpuapp_dma_region>;
+	/delete-property/rx-delay-supported;
+	/delete-property/rx-delay;
+};

tests/drivers/spi/spi_controller_peripheral/boards/nrf54h20dk_nrf54h20_cpurad.overlay

@@ -5,7 +5,7 @@
  */
 #include "nrf54h20dk_nrf54h20_common.dtsi"
 
-&dut_spi {
+&spi130 {
 	memory-regions = <&cpurad_dma_region>;
 };
 

tests/drivers/spi/spi_controller_peripheral/testcase.yaml

@@ -7,36 +7,53 @@ common:
   platform_allow: |
     nrf52840dk/nrf52840 nrf54l15pdk/nrf54l15/cpuapp nrf54h20dk/nrf54h20/cpuapp
     nrf54h20dk/nrf54h20/cpurad
-  integration_platforms:
-    - nrf52840dk/nrf52840
 
 tests:
   drivers.spi.spi_mode0:
     extra_configs:
       - CONFIG_TESTED_SPI_MODE=0
     extra_args: EXTRA_DTC_OVERLAY_FILE="boards/250khz.overlay"
+    integration_platforms:
+      - nrf52840dk/nrf52840
 
   drivers.spi.spi_mode1:
     extra_configs:
       - CONFIG_TESTED_SPI_MODE=1
     extra_args: EXTRA_DTC_OVERLAY_FILE="boards/500khz.overlay"
+    integration_platforms:
+      - nrf52840dk/nrf52840
 
   drivers.spi.spi_mode2:
     extra_configs:
       - CONFIG_TESTED_SPI_MODE=2
     extra_args: EXTRA_DTC_OVERLAY_FILE="boards/1mhz.overlay"
+    integration_platforms:
+      - nrf52840dk/nrf52840
 
   drivers.spi.spi_mode3:
     extra_configs:
       - CONFIG_TESTED_SPI_MODE=3
     extra_args: EXTRA_DTC_OVERLAY_FILE="boards/2mhz.overlay"
+    integration_platforms:
+      - nrf52840dk/nrf52840
 
   drivers.spi.spi_4MHz:
     extra_configs:
       - CONFIG_TESTED_SPI_MODE=2
     extra_args: EXTRA_DTC_OVERLAY_FILE="boards/4mhz.overlay"
+    integration_platforms:
+      - nrf52840dk/nrf52840
 
   drivers.spi.spi_8MHz:
     extra_configs:
       - CONFIG_TESTED_SPI_MODE=1
     extra_args: EXTRA_DTC_OVERLAY_FILE="boards/8mhz.overlay"
+    integration_platforms:
+      - nrf52840dk/nrf52840
+
+  drivers.spi.spi_fast:
+    extra_args: DTC_OVERLAY_FILE="boards/nrf54h20dk_nrf54h20_cpuapp_fast.overlay"
+    platform_exclude:
+      - nrf52840dk/nrf52840
+      - nrf54l15pdk/nrf54l15/cpuapp
+      - nrf54h20dk/nrf54h20/cpurad

tests/drivers/spi/spi_error_cases/boards/nrf54h20dk_nrf54h20_cpuapp_fast.overlay

@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2024 Nordic Semiconductor
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+&pinctrl {
+	spi121_default_alt: spi121_default_alt {
+		group1 {
+			psels = <NRF_PSEL(SPIM_SCK, 7, 2)>,
+				<NRF_PSEL(SPIM_MISO, 7, 0)>,
+				<NRF_PSEL(SPIM_MOSI, 7, 1)>;
+		};
+	};
+
+	spi121_sleep_alt: spi121_sleep_alt {
+		group1 {
+			psels = <NRF_PSEL(SPIM_SCK, 7, 2)>,
+				<NRF_PSEL(SPIM_MISO, 7, 0)>,
+				<NRF_PSEL(SPIM_MOSI, 7, 1)>;
+			low-power-enable;
+		};
+	};
+
+	spis131_default_alt: spis131_default_alt {
+		group1 {
+			psels = <NRF_PSEL(SPIS_SCK, 1, 0)>,
+				<NRF_PSEL(SPIS_MISO, 1, 9)>,
+				<NRF_PSEL(SPIS_MOSI, 1, 5)>,
+				<NRF_PSEL(SPIS_CSN, 0, 11)>;
+		};
+	};
+
+	spis131_sleep_alt: spis131_sleep_alt {
+		group1 {
+			psels = <NRF_PSEL(SPIS_SCK, 1, 0)>,
+				<NRF_PSEL(SPIS_MISO, 1, 9)>,
+				<NRF_PSEL(SPIS_MOSI, 1, 5)>,
+				<NRF_PSEL(SPIS_CSN, 0, 11)>;
+			low-power-enable;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&spi121 {
+	compatible = "nordic,nrf-spim";
+	status = "okay";
+	pinctrl-0 = <&spi121_default_alt>;
+	pinctrl-1 = <&spi121_sleep_alt>;
+	pinctrl-names = "default", "sleep";
+	overrun-character = <0x00>;
+	memory-regions = <&dma_fast_region>;
+	cs-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+	dut_spi_dt: test-spi-dev@0 {
+		compatible = "vnd,spi-device";
+		reg = <0>;
+		spi-max-frequency = <DT_FREQ_M(8)>;
+	};
+};
+
+dut_spis: &spi131 {
+	compatible = "nordic,nrf-spis";
+	status = "okay";
+	def-char = <0x00>;
+	pinctrl-0 = <&spis131_default_alt>;
+	pinctrl-1 = <&spis131_sleep_alt>;
+	pinctrl-names = "default", "sleep";
+	memory-regions = <&cpuapp_dma_region>;
+	/delete-property/rx-delay-supported;
+	/delete-property/rx-delay;
+};

tests/drivers/spi/spi_error_cases/boards/nrf54h20dk_nrf54h20_cpuppr.overlay

@@ -0,0 +1,85 @@
+/*
+ * Copyright (c) 2024 Nordic Semiconductor
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+&pinctrl {
+	spi130_default_alt: spi130_default_alt {
+		group1 {
+			psels = <NRF_PSEL(SPIM_SCK, 0, 0)>,
+				<NRF_PSEL(SPIM_MISO, 0, 6)>,
+				<NRF_PSEL(SPIM_MOSI, 0, 8)>;
+		};
+	};
+
+	spi130_sleep_alt: spi130_sleep_alt {
+		group1 {
+			psels = <NRF_PSEL(SPIM_SCK, 0, 0)>,
+				<NRF_PSEL(SPIM_MISO, 0, 6)>,
+				<NRF_PSEL(SPIM_MOSI, 0, 8)>;
+			low-power-enable;
+		};
+	};
+
+	spis131_default_alt: spis131_default_alt {
+		group1 {
+			psels = <NRF_PSEL(SPIS_SCK, 0, 1)>,
+				<NRF_PSEL(SPIS_MISO, 0, 7)>,
+				<NRF_PSEL(SPIS_MOSI, 0, 9)>,
+				<NRF_PSEL(SPIS_CSN, 0, 11)>;
+		};
+	};
+
+	spis131_sleep_alt: spis131_sleep_alt {
+		group1 {
+			psels = <NRF_PSEL(SPIS_SCK, 0, 1)>,
+				<NRF_PSEL(SPIS_MISO, 0, 7)>,
+				<NRF_PSEL(SPIS_MOSI, 0, 9)>,
+				<NRF_PSEL(SPIS_CSN, 0, 11)>;
+			low-power-enable;
+		};
+	};
+
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpiote130 {
+	status = "okay";
+	owned-channels = <7>;
+};
+
+&cpuapp_dma_region {
+	status = "okay";
+};
+
+&spi130 {
+	compatible = "nordic,nrf-spim";
+	status = "okay";
+	pinctrl-0 = <&spi130_default_alt>;
+	pinctrl-1 = <&spi130_sleep_alt>;
+	pinctrl-names = "default", "sleep";
+	overrun-character = <0x00>;
+	cs-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+	dut_spi_dt: test-spi-dev@0 {
+		compatible = "vnd,spi-device";
+		reg = <0>;
+		spi-max-frequency = <500000>;
+	};
+	memory-regions = <&cpuapp_dma_region>;
+};
+
+dut_spis: &spi131 {
+	compatible = "nordic,nrf-spis";
+	status = "okay";
+	def-char = <0x00>;
+	pinctrl-0 = <&spis131_default_alt>;
+	pinctrl-1 = <&spis131_sleep_alt>;
+	pinctrl-names = "default", "sleep";
+	memory-regions = <&cpuapp_dma_region>;
+	/delete-property/rx-delay-supported;
+	/delete-property/rx-delay;
+};

tests/drivers/spi/spi_error_cases/boards/nrf54h20dk_nrf54h20_cpuppr_launcher.overlay

@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2024 Nordic Semiconductor ASA
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+&spi130 {
+	status = "reserved";
+	interrupt-parent = <&cpuppr_clic>;
+};
+
+&spi131 {
+	status = "reserved";
+	interrupt-parent = <&cpuppr_clic>;
+};
+
+&shared_ram3x_region {
+	status = "okay";
+};
+
+&gpio0 {
+	status = "reserved";
+};

tests/drivers/spi/spi_error_cases/src/main.c

@@ -176,18 +176,6 @@ ZTEST(spi_error_cases, test_unsupported_frequency)
 	zassert_equal(rv, -EINVAL, "Got %d instead", rv);
 }
 
-ZTEST(spi_error_cases, test_CS_unsupported_on_slave)
-{
-	int slave_rv;
-	struct spi_config spis_config_invalid = spis_config;
-	struct gpio_dt_spec test_gpio = { DEVICE_DT_GET(DT_NODELABEL(gpio0)), 10, GPIO_ACTIVE_LOW };
-
-	spis_config_invalid.cs.gpio = test_gpio;
-
-	slave_rv = spi_transceive(spis_dev, &spis_config_invalid, tdata.stx_set, tdata.srx_set);
-	zassert_equal(slave_rv, -EINVAL, "Got %d instead", slave_rv);
-}
-
 ZTEST(spi_error_cases, test_spis_scattered_tx_buf_not_supported)
 {
 	int slave_rv;

tests/drivers/spi/spi_error_cases/testcase.yaml

@@ -1,13 +1,26 @@
+common:
+  depends_on: spi
+  tags: drivers spi
+  harness: ztest
+  harness_config:
+    fixture: gpio_spi_loopback
 tests:
   drivers.spi.spi_error_cases:
-    depends_on: spi
-    tags: drivers spi
-    harness: ztest
-    harness_config:
-      fixture: gpio_spi_loopback
     platform_allow:
       - nrf52840dk/nrf52840
       - nrf54l15pdk/nrf54l15/cpuapp
       - nrf54h20dk/nrf54h20/cpuapp
     integration_platforms:
       - nrf52840dk/nrf52840
+  drivers.spi.spi_error_cases.fast:
+    extra_args: DTC_OVERLAY_FILE="boards/nrf54h20dk_nrf54h20_cpuapp_fast.overlay"
+    platform_allow:
+      - nrf54h20dk/nrf54h20/cpuapp
+  drivers.spi.spi_error_cases.nrf54h20_cpuppr:
+    platform_allow: nrf54h20dk/nrf54h20/cpuppr
+    sysbuild: true
+    extra_args:
+      - vpr_launcher_DTC_OVERLAY_FILE="../../../tests/drivers/spi/spi_error_cases/boards/nrf54h20dk_nrf54h20_cpuppr_launcher.overlay"
+      - SB_CONFIG_VPR_LAUNCHER=y
+      # Disable asserts to fit in limited code memory
+      - CONFIG_ASSERT=n

tests/drivers/spi/spi_loopback/boards/nrf54h20dk_nrf54h20_cpuapp_fast.overlay

@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2024 Nordic Semiconductor ASA
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+&pinctrl {
+	spi120_default: spi120_default {
+		group1 {
+			psels = <NRF_PSEL(SPIM_SCK, 7, 3)>,
+				<NRF_PSEL(SPIM_MISO, 7, 6)>,
+				<NRF_PSEL(SPIM_MOSI, 7, 7)>;
+		};
+	};
+
+	spi120_sleep: spi120_sleep {
+		group1 {
+			psels = <NRF_PSEL(SPIM_SCK, 7, 3)>,
+				<NRF_PSEL(SPIM_MISO, 7, 6)>,
+				<NRF_PSEL(SPIM_MOSI, 7, 7)>;
+			low-power-enable;
+		};
+	};
+};
+
+&spi120 {
+	status = "okay";
+	pinctrl-0 = <&spi120_default>;
+	pinctrl-1 = <&spi120_sleep>;
+	pinctrl-names = "default", "sleep";
+	overrun-character = <0x00>;
+	memory-regions = <&dma_fast_region>;
+	slow@0 {
+		compatible = "test-spi-loopback-slow";
+		reg = <0>;
+		spi-max-frequency = <DT_FREQ_M(4)>;
+	};
+	fast@0 {
+		compatible = "test-spi-loopback-fast";
+		reg = <0>;
+		spi-max-frequency = <DT_FREQ_M(8)>;
+	};
+};

tests/drivers/spi/spi_loopback/testcase.yaml

@@ -169,3 +169,7 @@ tests:
     filter: CONFIG_DT_HAS_NXP_FLEXIO_ENABLED and
             CONFIG_DT_HAS_NXP_FLEXIO_SPI_ENABLED
     platform_allow: mimxrt1064_evk
+  drivers.spi.nrf_fast:
+    extra_args: DTC_OVERLAY_FILE="boards/nrf54h20dk_nrf54h20_cpuapp_fast.overlay"
+    platform_allow:
+      - nrf54h20dk/nrf54h20/cpuapp