michaelh/zephyr
1
0
Fork 0
Code Releases Activity

gpio: mcux: Convert convert to DT_INST defines

Browse source 
Convert driver to use DT_INST_ defines.  As part of this conversion we
remove the Kconfig options for per GPIO controller enables and instead
get that information from device tree.  This means we now disable each
GPIO controller by default in the DTS and have each board dts enable the
GPIO controller ports it needs.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit is contained in:
Kumar Gala 2020-02-12 12:34:35 -06:00 • committed by Kumar Gala
commit 22e65cb9ba
35 changed files with 273 additions and 435 deletions
Download patch file Download diff file Expand all files Collapse all files

19
boards/arm/frdm_k22f/Kconfig.defconfig
View file

@ -39,25 +39,6 @@ config PINMUX_MCUX_PORTE
endif # PINMUX_MCUX
if GPIO_MCUX
config GPIO_MCUX_PORTA
default y
config GPIO_MCUX_PORTB
default y
config GPIO_MCUX_PORTC
default y
config GPIO_MCUX_PORTD
default y
config GPIO_MCUX_PORTE
default y
endif # GPIO_MCUX
config I2C_0
default y
depends on I2C

20
boards/arm/frdm_k22f/frdm_k22f.dts
View file

@ -122,6 +122,26 @@ arduino_spi: &spi0 {
num-bidir-endpoints = <8>;
};
&gpioa {
status = "okay";
};
&gpiob {
status = "okay";
};
&gpioc {
status = "okay";
};
&gpiod {
status = "okay";
};
&gpioe {
status = "okay";
};
&flash0 {
/*
* For more information, see:

19
boards/arm/frdm_k64f/Kconfig.defconfig
View file

@ -39,25 +39,6 @@ config PINMUX_MCUX_PORTE
endif # PINMUX_MCUX
if GPIO_MCUX
config GPIO_MCUX_PORTA
default y
config GPIO_MCUX_PORTB
default y
config GPIO_MCUX_PORTC
default y
config GPIO_MCUX_PORTD
default y
config GPIO_MCUX_PORTE
default y
endif # GPIO_MCUX
config I2C_0
default y
depends on I2C

20
boards/arm/frdm_k64f/frdm_k64f.dts
View file

@ -139,6 +139,26 @@ arduino_spi: &spi0 {
num-bidir-endpoints = <8>;
};
&gpioa {
status = "okay";
};
&gpiob {
status = "okay";
};
&gpioc {
status = "okay";
};
&gpiod {
status = "okay";
};
&gpioe {
status = "okay";
};
&flash0 {
/*
* For more information, see:

19
boards/arm/frdm_k82f/Kconfig.defconfig
View file

@ -34,25 +34,6 @@ config FXOS8700_DRDY_INT1
default y
depends on FXOS8700
if GPIO_MCUX
config GPIO_MCUX_PORTA
default y
config GPIO_MCUX_PORTB
default y
config GPIO_MCUX_PORTC
default y
config GPIO_MCUX_PORTD
default y
config GPIO_MCUX_PORTE
default y
endif # GPIO_MCUX
config I2C_3
default y
depends on I2C

20
boards/arm/frdm_k82f/frdm_k82f.dts
View file

@ -106,6 +106,26 @@
};
};
&gpioa {
status = "okay";
};
&gpiob {
status = "okay";
};
&gpioc {
status = "okay";
};
&gpiod {
status = "okay";
};
&gpioe {
status = "okay";
};
&flash0 {
/*
* For more information, see:

19
boards/arm/frdm_kl25z/Kconfig.defconfig
View file

@ -42,25 +42,6 @@ config PINMUX_MCUX_PORTE
endif # PINMUX_MCUX
if GPIO_MCUX
config GPIO_MCUX_PORTA
default y
config GPIO_MCUX_PORTB
default y
config GPIO_MCUX_PORTC
default n
config GPIO_MCUX_PORTD
default y
config GPIO_MCUX_PORTE
default n
endif # GPIO_MCUX
config UART_MCUX_LPSCI_0
default y if UART_CONSOLE
depends on UART_MCUX_LPSCI

12
boards/arm/frdm_kl25z/frdm_kl25z.dts
View file

@ -105,6 +105,18 @@
current-speed = <115200>;
};
&gpioa {
status = "okay";
};
&gpiob {
status = "okay";
};
&gpiod {
status = "okay";
};
&usbotg {
compatible = "nxp,kinetis-usbd";
status = "okay";

13
boards/arm/frdm_kw41z/Kconfig.defconfig
View file

@ -30,19 +30,6 @@ config PINMUX_MCUX_PORTC
endif # PINMUX_MCUX
if GPIO_MCUX
config GPIO_MCUX_PORTA
default y
config GPIO_MCUX_PORTB
default n
config GPIO_MCUX_PORTC
default y
endif # GPIO_MCUX
config I2C_1
default y
depends on I2C

8
boards/arm/frdm_kw41z/frdm_kw41z.dts
View file

@ -99,3 +99,11 @@
status = "okay";
current-speed = <115200>;
};
&gpioa {
status = "okay";
};
&gpioc {
status = "okay";
};

19
boards/arm/hexiwear_k64/Kconfig.defconfig
View file

@ -39,25 +39,6 @@ config PINMUX_MCUX_PORTE
endif # PINMUX_MCUX
if GPIO_MCUX
config GPIO_MCUX_PORTA
default y if MAX30101
config GPIO_MCUX_PORTB
default y
config GPIO_MCUX_PORTC
default y
config GPIO_MCUX_PORTD
default y
config GPIO_MCUX_PORTE
default y
endif # GPIO_MCUX
if I2C
config I2C_0

17
boards/arm/hexiwear_k64/hexiwear_k64.dts
View file

@ -79,6 +79,7 @@
status = "okay";
max30101@57 {
status = "disabled";
compatible = "max,max30101";
reg = <0x57>;
label = "MAX30101";
@ -115,6 +116,22 @@
current-speed = <115200>;
};
&gpiob {
status = "okay";
};
&gpioc {
status = "okay";
};
&gpiod {
status = "okay";
};
&gpioe {
status = "okay";
};
&flash0 {
/*
* For more information, see:

9
boards/arm/hexiwear_k64/pinmux.c
View file

@ -13,10 +13,6 @@ static int hexiwear_k64_pinmux_init(struct device *dev)
{
ARG_UNUSED(dev);
#ifdef CONFIG_PINMUX_MCUX_PORTA
struct device *porta =
device_get_binding(CONFIG_PINMUX_MCUX_PORTA_NAME);
#endif
#ifdef CONFIG_PINMUX_MCUX_PORTB
struct device *portb =
device_get_binding(CONFIG_PINMUX_MCUX_PORTB_NAME);
@ -87,7 +83,10 @@ static int hexiwear_k64_pinmux_init(struct device *dev)
pinmux_pin_set(porte, 25, PORT_PCR_MUX(kPORT_MuxAlt3));
#endif
#ifdef CONFIG_MAX30101
#if defined(CONFIG_MAX30101) && DT_HAS_NODE(DT_NODELABEL(gpioa))
struct device *porta =
device_get_binding(CONFIG_PINMUX_MCUX_PORTA_NAME);
/* LDO - MAX30101 power supply */
pinmux_pin_set(porta, 29, PORT_PCR_MUX(kPORT_MuxAsGpio));

13
boards/arm/hexiwear_kw40z/Kconfig.defconfig
View file

@ -30,19 +30,6 @@ config PINMUX_MCUX_PORTC
endif # PINMUX_MCUX
if GPIO_MCUX
config GPIO_MCUX_PORTA
default y
config GPIO_MCUX_PORTB
default n
config GPIO_MCUX_PORTC
default y if "$(dt_nodelabel_enabled,lpuart0)" || "$(dt_nodelabel_enabled,i2c1)"
endif # GPIO_MCUX
config I2C_1
default y
depends on I2C

8
boards/arm/hexiwear_kw40z/hexiwear_kw40z.dts
View file

@ -26,3 +26,11 @@
status = "okay";
current-speed = <115200>;
};
&gpioa {
status = "okay";
};
&gpioc {
status = "okay";
};

10
boards/arm/ip_k66f/Kconfig.defconfig
View file

@ -30,14 +30,4 @@ config PINMUX_MCUX_PORTB
endif # PINMUX_MCUX
if GPIO_MCUX
config GPIO_MCUX_PORTA
default y
config GPIO_MCUX_PORTB
default y
endif # GPIO_MCUX
endif # BOARD_IP_K66F

8
boards/arm/ip_k66f/ip_k66f.dts
View file

@ -41,6 +41,14 @@
clock-frequency = <120000000>;
};
&gpioa {
status = "okay";
};
&gpiob {
status = "okay";
};
&flash0 {
/*
* For more information, see:

19
boards/arm/twr_ke18f/Kconfig.defconfig
View file

@ -51,25 +51,6 @@ config PINMUX_MCUX_PORTE
endif # PINMUX_MCUX
if GPIO_MCUX
config GPIO_MCUX_PORTA
default y
config GPIO_MCUX_PORTB
default y
config GPIO_MCUX_PORTC
default y
config GPIO_MCUX_PORTD
default y
config GPIO_MCUX_PORTE
default y
endif # GPIO_MCUX
config ADC_0
default y
depends on ADC

20
boards/arm/twr_ke18f/twr_ke18f.dts
View file

@ -205,6 +205,26 @@
bus-speed = <125000>;
};
&gpioa {
status = "okay";
};
&gpiob {
status = "okay";
};
&gpioc {
status = "okay";
};
&gpiod {
status = "okay";
};
&gpioe {
status = "okay";
};
&flash0 {
/*
* For more information, see:

19
boards/arm/twr_kv58f220m/Kconfig.defconfig
View file

@ -20,25 +20,6 @@ config MCG_VDIV0
config MCG_FCRDIV
default 1
if GPIO_MCUX
config GPIO_MCUX_PORTA
default y
config GPIO_MCUX_PORTB
default y
config GPIO_MCUX_PORTC
default y
config GPIO_MCUX_PORTD
default y
config GPIO_MCUX_PORTE
default y
endif # GPIO_MCUX
config I2C_1
default y
depends on I2C

20
boards/arm/twr_kv58f220m/twr_kv58f220m.dts
View file

@ -73,6 +73,26 @@
};
};
&gpioa {
status = "okay";
};
&gpiob {
status = "okay";
};
&gpioc {
status = "okay";
};
&gpiod {
status = "okay";
};
&gpioe {
status = "okay";
};
&flash0 {
/*
* For more information, see:

19
boards/arm/usb_kw24d512/Kconfig.defconfig
View file

@ -40,25 +40,6 @@ config PINMUX_MCUX_PORTD
endif # PINMUX_MCUX
if GPIO_MCUX
config GPIO_MCUX_PORTA
default y
config GPIO_MCUX_PORTB
default y
config GPIO_MCUX_PORTC
default y
config GPIO_MCUX_PORTD
default y
config GPIO_MCUX_PORTE
default y
endif # GPIO_MCUX
if I2C
config I2C_0

20
boards/arm/usb_kw24d512/usb_kw24d512.dts
View file

@ -69,3 +69,23 @@
status = "okay";
num-bidir-endpoints = <8>;
};
&gpioa {
status = "okay";
};
&gpiob {
status = "okay";
};
&gpioc {
status = "okay";
};
&gpiod {
status = "okay";
};
&gpioe {
status = "okay";
};

36
drivers/gpio/Kconfig.mcux
View file

@ -4,42 +4,8 @@
# Copyright (c) 2017, NXP
# SPDX-License-Identifier: Apache-2.0
menuconfig GPIO_MCUX
config GPIO_MCUX
bool "MCUX GPIO driver"
select HAS_DTS_GPIO
help
Enable the MCUX pinmux driver.
if GPIO_MCUX
config GPIO_MCUX_PORTA
bool "Port A"
depends on PINMUX_MCUX_PORTA
help
Enable Port A.
config GPIO_MCUX_PORTB
bool "Port B"
depends on PINMUX_MCUX_PORTB
help
Enable Port B.
config GPIO_MCUX_PORTC
bool "Port C"
depends on PINMUX_MCUX_PORTC
help
Enable Port C.
config GPIO_MCUX_PORTD
bool "Port D"
depends on PINMUX_MCUX_PORTD
help
Enable Port D.
config GPIO_MCUX_PORTE
bool "Port E"
depends on PINMUX_MCUX_PORTE
help
Enable Port E.
endif # GPIO_MCUX

213
drivers/gpio/gpio_mcux.c
View file

@ -277,182 +277,45 @@ static const struct gpio_driver_api gpio_mcux_driver_api = {
.disable_callback = gpio_mcux_disable_callback,
};
#ifdef CONFIG_GPIO_MCUX_PORTA
static int gpio_mcux_porta_init(struct device *dev);
#define GPIO_MCUX_IRQ_INIT(n) \
do { \
IRQ_CONNECT(DT_INST_IRQN(n), \
DT_INST_IRQ(n, priority), \
gpio_mcux_port_isr, \
DEVICE_GET(gpio_mcux_port##n), 0); \
\
irq_enable(DT_INST_IRQN(n)); \
} while (0)
static const struct gpio_mcux_config gpio_mcux_porta_config = {
.common = {
.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(0),
},
.gpio_base = (GPIO_Type *) DT_NXP_KINETIS_GPIO_GPIO_A_BASE_ADDRESS,
.port_base = PORTA,
#ifdef DT_NXP_KINETIS_GPIO_GPIO_A_IRQ_0
.flags = GPIO_INT_ENABLE,
#else
.flags = 0,
#endif
};
#define GPIO_PORT_BASE_ADDR(n) DT_REG_ADDR(DT_INST_PHANDLE(n, nxp_kinetis_port))
static struct gpio_mcux_data gpio_mcux_porta_data;
DEVICE_AND_API_INIT(gpio_mcux_porta, DT_NXP_KINETIS_GPIO_GPIO_A_LABEL,
gpio_mcux_porta_init,
&gpio_mcux_porta_data, &gpio_mcux_porta_config,
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEFAULT,
&gpio_mcux_driver_api);
static int gpio_mcux_porta_init(struct device *dev)
{
#ifdef DT_NXP_KINETIS_GPIO_GPIO_A_IRQ_0
IRQ_CONNECT(DT_NXP_KINETIS_GPIO_GPIO_A_IRQ_0, DT_NXP_KINETIS_GPIO_GPIO_A_IRQ_0_PRIORITY,
gpio_mcux_port_isr, DEVICE_GET(gpio_mcux_porta), 0);
irq_enable(DT_NXP_KINETIS_GPIO_GPIO_A_IRQ_0);
#endif
return 0;
#define GPIO_DEVICE_INIT_MCUX(n) \
static int gpio_mcux_port## n ## _init(struct device *dev); \
\
static const struct gpio_mcux_config gpio_mcux_port## n ## _config = {\
.common = { \
.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(n),\
}, \
.gpio_base = (GPIO_Type *) DT_INST_REG_ADDR(n), \
.port_base = (PORT_Type *) GPIO_PORT_BASE_ADDR(n), \
.flags = UTIL_AND(DT_INST_IRQ_HAS_IDX(n, 0), GPIO_INT_ENABLE),\
}; \
\
static struct gpio_mcux_data gpio_mcux_port## n ##_data; \
\
DEVICE_AND_API_INIT(gpio_mcux_port## n, DT_INST_LABEL(n), \
gpio_mcux_port## n ##_init, \
&gpio_mcux_port## n ##_data, \
&gpio_mcux_port## n##_config, \
POST_KERNEL, \
CONFIG_KERNEL_INIT_PRIORITY_DEFAULT, \
&gpio_mcux_driver_api); \
\
static int gpio_mcux_port## n ##_init(struct device *dev) \
{ \
IF_ENABLED(DT_INST_IRQ_HAS_IDX(n, 0), \
(GPIO_MCUX_IRQ_INIT(n);)) \
return 0; \
}
#endif /* CONFIG_GPIO_MCUX_PORTA */
#ifdef CONFIG_GPIO_MCUX_PORTB
static int gpio_mcux_portb_init(struct device *dev);
static const struct gpio_mcux_config gpio_mcux_portb_config = {
.common = {
.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(1),
},
.gpio_base = (GPIO_Type *) DT_NXP_KINETIS_GPIO_GPIO_B_BASE_ADDRESS,
.port_base = PORTB,
#ifdef DT_NXP_KINETIS_GPIO_GPIO_B_IRQ_0
.flags = GPIO_INT_ENABLE,
#else
.flags = 0,
#endif
};
static struct gpio_mcux_data gpio_mcux_portb_data;
DEVICE_AND_API_INIT(gpio_mcux_portb, DT_NXP_KINETIS_GPIO_GPIO_B_LABEL,
gpio_mcux_portb_init,
&gpio_mcux_portb_data, &gpio_mcux_portb_config,
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEFAULT,
&gpio_mcux_driver_api);
static int gpio_mcux_portb_init(struct device *dev)
{
#ifdef DT_NXP_KINETIS_GPIO_GPIO_B_IRQ_0
IRQ_CONNECT(DT_NXP_KINETIS_GPIO_GPIO_B_IRQ_0, DT_NXP_KINETIS_GPIO_GPIO_B_IRQ_0_PRIORITY,
gpio_mcux_port_isr, DEVICE_GET(gpio_mcux_portb), 0);
irq_enable(DT_NXP_KINETIS_GPIO_GPIO_B_IRQ_0);
#endif
return 0;
}
#endif /* CONFIG_GPIO_MCUX_PORTB */
#ifdef CONFIG_GPIO_MCUX_PORTC
static int gpio_mcux_portc_init(struct device *dev);
static const struct gpio_mcux_config gpio_mcux_portc_config = {
.common = {
.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(2),
},
.gpio_base = (GPIO_Type *) DT_NXP_KINETIS_GPIO_GPIO_C_BASE_ADDRESS,
.port_base = PORTC,
#ifdef DT_NXP_KINETIS_GPIO_GPIO_C_IRQ_0
.flags = GPIO_INT_ENABLE,
#else
.flags = 0,
#endif
};
static struct gpio_mcux_data gpio_mcux_portc_data;
DEVICE_AND_API_INIT(gpio_mcux_portc, DT_NXP_KINETIS_GPIO_GPIO_C_LABEL,
gpio_mcux_portc_init,
&gpio_mcux_portc_data, &gpio_mcux_portc_config,
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEFAULT,
&gpio_mcux_driver_api);
static int gpio_mcux_portc_init(struct device *dev)
{
#ifdef DT_NXP_KINETIS_GPIO_GPIO_C_IRQ_0
IRQ_CONNECT(DT_NXP_KINETIS_GPIO_GPIO_C_IRQ_0, DT_NXP_KINETIS_GPIO_GPIO_C_IRQ_0_PRIORITY,
gpio_mcux_port_isr, DEVICE_GET(gpio_mcux_portc), 0);
irq_enable(DT_NXP_KINETIS_GPIO_GPIO_C_IRQ_0);
#endif
return 0;
}
#endif /* CONFIG_GPIO_MCUX_PORTC */
#ifdef CONFIG_GPIO_MCUX_PORTD
static int gpio_mcux_portd_init(struct device *dev);
static const struct gpio_mcux_config gpio_mcux_portd_config = {
.common = {
.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(3),
},
.gpio_base = (GPIO_Type *) DT_NXP_KINETIS_GPIO_GPIO_D_BASE_ADDRESS,
.port_base = PORTD,
#ifdef DT_NXP_KINETIS_GPIO_GPIO_D_IRQ_0
.flags = GPIO_INT_ENABLE,
#else
.flags = 0,
#endif
};
static struct gpio_mcux_data gpio_mcux_portd_data;
DEVICE_AND_API_INIT(gpio_mcux_portd, DT_NXP_KINETIS_GPIO_GPIO_D_LABEL,
gpio_mcux_portd_init,
&gpio_mcux_portd_data, &gpio_mcux_portd_config,
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEFAULT,
&gpio_mcux_driver_api);
static int gpio_mcux_portd_init(struct device *dev)
{
#ifdef DT_NXP_KINETIS_GPIO_GPIO_D_IRQ_0
IRQ_CONNECT(DT_NXP_KINETIS_GPIO_GPIO_D_IRQ_0, DT_NXP_KINETIS_GPIO_GPIO_D_IRQ_0_PRIORITY,
gpio_mcux_port_isr, DEVICE_GET(gpio_mcux_portd), 0);
irq_enable(DT_NXP_KINETIS_GPIO_GPIO_D_IRQ_0);
#endif
return 0;
}
#endif /* CONFIG_GPIO_MCUX_PORTD */
#ifdef CONFIG_GPIO_MCUX_PORTE
static int gpio_mcux_porte_init(struct device *dev);
static const struct gpio_mcux_config gpio_mcux_porte_config = {
.common = {
.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(4),
},
.gpio_base = (GPIO_Type *) DT_NXP_KINETIS_GPIO_GPIO_E_BASE_ADDRESS,
.port_base = PORTE,
#ifdef DT_NXP_KINETIS_GPIO_GPIO_E_IRQ_0
.flags = GPIO_INT_ENABLE,
#else
.flags = 0,
#endif
};
static struct gpio_mcux_data gpio_mcux_porte_data;
DEVICE_AND_API_INIT(gpio_mcux_porte, DT_NXP_KINETIS_GPIO_GPIO_E_LABEL,
gpio_mcux_porte_init,
&gpio_mcux_porte_data, &gpio_mcux_porte_config,
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEFAULT,
&gpio_mcux_driver_api);
static int gpio_mcux_porte_init(struct device *dev)
{
#ifdef DT_NXP_KINETIS_GPIO_GPIO_E_IRQ_0
IRQ_CONNECT(DT_NXP_KINETIS_GPIO_GPIO_E_IRQ_0, DT_NXP_KINETIS_GPIO_GPIO_E_IRQ_0_PRIORITY,
gpio_mcux_port_isr, DEVICE_GET(gpio_mcux_porte), 0);
irq_enable(DT_NXP_KINETIS_GPIO_GPIO_E_IRQ_0);
#endif
return 0;
}
#endif /* CONFIG_GPIO_MCUX_PORTE */
DT_INST_FOREACH(GPIO_DEVICE_INIT_MCUX)

10
dts/arm/nxp/nxp_k2x.dtsi
View file

@ -17,11 +17,6 @@
aliases {
adc-0 = &adc0;
gpio-a = &gpioa;
gpio-b = &gpiob;
gpio-c = &gpioc;
gpio-d = &gpiod;
gpio-e = &gpioe;
i2c-0 = &i2c0;
i2c-1 = &i2c1;
pinmux-a = &porta;
@ -230,6 +225,7 @@
gpioa: gpio@400ff000 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff000 0x40>;
interrupts = <59 2>;
label = "GPIO_0";
@ -240,6 +236,7 @@
gpiob: gpio@400ff040 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff040 0x40>;
interrupts = <60 2>;
label = "GPIO_1";
@ -250,6 +247,7 @@
gpioc: gpio@400ff080 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff080 0x40>;
interrupts = <61 2>;
label = "GPIO_2";
@ -260,6 +258,7 @@
gpiod: gpio@400ff0c0 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff0c0 0x40>;
interrupts = <62 2>;
label = "GPIO_3";
@ -270,6 +269,7 @@
gpioe: gpio@400ff100 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff100 0x40>;
interrupts = <63 2>;
label = "GPIO_4";

5
dts/arm/nxp/nxp_k6x.dtsi
View file

@ -293,6 +293,7 @@
gpioa: gpio@400ff000 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff000 0x40>;
interrupts = <59 2>;
label = "GPIO_0";
@ -303,6 +304,7 @@
gpiob: gpio@400ff040 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff040 0x40>;
interrupts = <60 2>;
label = "GPIO_1";
@ -313,6 +315,7 @@
gpioc: gpio@400ff080 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff080 0x40>;
interrupts = <61 2>;
label = "GPIO_2";
@ -323,6 +326,7 @@
gpiod: gpio@400ff0c0 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff0c0 0x40>;
interrupts = <62 2>;
label = "GPIO_3";
@ -333,6 +337,7 @@
gpioe: gpio@400ff100 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff100 0x40>;
interrupts = <63 2>;
label = "GPIO_4";

10
dts/arm/nxp/nxp_k8x.dtsi
View file

@ -13,11 +13,6 @@
/ {
aliases {
adc-0 = &adc0;
gpio-a = &gpioa;
gpio-b = &gpiob;
gpio-c = &gpioc;
gpio-d = &gpiod;
gpio-e = &gpioe;
i2c-0 = &i2c0;
i2c-1 = &i2c1;
i2c-2 = &i2c2;
@ -106,6 +101,7 @@
gpioa: gpio@400ff000 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff000 0x40>;
interrupts = <59 2>;
label = "GPIO_0";
@ -116,6 +112,7 @@
gpiob: gpio@400ff040 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff040 0x40>;
interrupts = <60 2>;
label = "GPIO_1";
@ -126,6 +123,7 @@
gpioc: gpio@400ff080 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff080 0x40>;
interrupts = <61 2>;
label = "GPIO_2";
@ -136,6 +134,7 @@
gpiod: gpio@400ff0c0 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff0c0 0x40>;
interrupts = <62 2>;
label = "GPIO_3";
@ -146,6 +145,7 @@
gpioe: gpio@400ff100 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff100 0x40>;
interrupts = <63 2>;
label = "GPIO_4";

5
dts/arm/nxp/nxp_ke1xf.dtsi
View file

@ -310,6 +310,7 @@
gpioa: gpio@400ff000 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff000 0x40>;
interrupts = <59 2>;
label = "GPIO_0";
@ -320,6 +321,7 @@
gpiob: gpio@400ff040 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff040 0x40>;
interrupts = <60 2>;
label = "GPIO_1";
@ -330,6 +332,7 @@
gpioc: gpio@400ff080 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff080 0x40>;
interrupts = <61 2>;
label = "GPIO_2";
@ -340,6 +343,7 @@
gpiod: gpio@400ff0c0 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff0c0 0x40>;
interrupts = <62 2>;
label = "GPIO_3";
@ -350,6 +354,7 @@
gpioe: gpio@400ff100 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff100 0x40>;
interrupts = <63 2>;
label = "GPIO_4";

10
dts/arm/nxp/nxp_kl25z.dtsi
View file

@ -8,11 +8,6 @@
/ {
aliases {
adc-0 = &adc0;
gpio-a = &gpioa;
gpio-b = &gpiob;
gpio-c = &gpioc;
gpio-d = &gpiod;
gpio-e = &gpioe;
i2c-0 = &i2c0;
i2c-1 = &i2c1;
uart-0 = &uart0;
@ -137,6 +132,7 @@
gpioa: gpio@400ff000 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff000 0x40>;
interrupts = <30 2>;
label = "GPIO_0";
@ -147,6 +143,7 @@
gpiob: gpio@400ff040 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff040 0x40>;
label = "GPIO_1";
gpio-controller;
@ -156,6 +153,7 @@
gpioc: gpio@400ff080 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff080 0x40>;
label = "GPIO_2";
gpio-controller;
@ -165,6 +163,7 @@
gpiod: gpio@400ff0c0 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff0c0 0x40>;
interrupts = <31 2>;
label = "GPIO_3";
@ -175,6 +174,7 @@
gpioe: gpio@400ff100 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff100 0x40>;
label = "GPIO_4";
gpio-controller;

10
dts/arm/nxp/nxp_kv5x.dtsi
View file

@ -12,11 +12,6 @@
/ {
aliases {
adc-0 = &adc0;
gpio-a = &gpioa;
gpio-b = &gpiob;
gpio-c = &gpioc;
gpio-d = &gpiod;
gpio-e = &gpioe;
i2c-0 = &i2c0;
i2c-1 = &i2c1;
pinmux-a = &porta;
@ -97,6 +92,7 @@
gpioa: gpio@400ff000 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff000 0x40>;
interrupts = <59 2>;
label = "GPIO_0";
@ -107,6 +103,7 @@
gpiob: gpio@400ff040 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff040 0x40>;
interrupts = <60 2>;
label = "GPIO_1";
@ -117,6 +114,7 @@
gpioc: gpio@400ff080 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff080 0x40>;
interrupts = <61 2>;
label = "GPIO_2";
@ -127,6 +125,7 @@
gpiod: gpio@400ff0c0 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff0c0 0x40>;
interrupts = <62 2>;
label = "GPIO_3";
@ -137,6 +136,7 @@
gpioe: gpio@400ff100 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff100 0x40>;
interrupts = <63 2>;
label = "GPIO_4";

10
dts/arm/nxp/nxp_kw2xd.dtsi
View file

@ -9,11 +9,6 @@
/ {
aliases {
adc-0 = &adc0;
gpio-a = &gpioa;
gpio-b = &gpiob;
gpio-c = &gpioc;
gpio-d = &gpiod;
gpio-e = &gpioe;
i2c-0 = &i2c0;
i2c-1 = &i2c1;
pinmux-a = &pinmux_a;
@ -191,6 +186,7 @@
gpioa: gpio@400ff000 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff000 0x40>;
interrupts = <59 2>;
label = "GPIO_0";
@ -201,6 +197,7 @@
gpiob: gpio@400ff040 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff040 0x40>;
interrupts = <60 2>;
label = "GPIO_1";
@ -211,6 +208,7 @@
gpioc: gpio@400ff080 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff080 0x40>;
interrupts = <61 2>;
label = "GPIO_2";
@ -221,6 +219,7 @@
gpiod: gpio@400ff0c0 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff0c0 0x40>;
interrupts = <62 2>;
label = "GPIO_3";
@ -231,6 +230,7 @@
gpioe: gpio@400ff100 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff100 0x40>;
interrupts = <63 2>;
label = "GPIO_4";

6
dts/arm/nxp/nxp_kw40z.dtsi
View file

@ -8,9 +8,6 @@
/ {
aliases {
adc-0 = &adc0;
gpio-a = &gpioa;
gpio-b = &gpiob;
gpio-c = &gpioc;
i2c-0 = &i2c0;
i2c-1 = &i2c1;
pinmux-a = &porta;
@ -142,6 +139,7 @@
gpioa: gpio@400ff000 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff000 0x40>;
interrupts = <30 2>;
label = "GPIO_0";
@ -152,6 +150,7 @@
gpiob: gpio@400ff040 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff040 0x40>;
label = "GPIO_2";
gpio-controller;
@ -161,6 +160,7 @@
gpioc: gpio@400ff080 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff080 0x40>;
interrupts = <31 2>;
label = "GPIO_3";

6
dts/arm/nxp/nxp_kw41z.dtsi
View file

@ -8,9 +8,6 @@
/ {
aliases {
adc-0 = &adc0;
gpio-a = &gpioa;
gpio-b = &gpiob;
gpio-c = &gpioc;
i2c-0 = &i2c0;
i2c-1 = &i2c1;
pinmux-a = &porta;
@ -145,6 +142,7 @@
gpioa: gpio@400ff000 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff000 0x40>;
interrupts = <30 2>;
label = "GPIO_0";
@ -155,6 +153,7 @@
gpiob: gpio@400ff040 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff040 0x40>;
label = "GPIO_1";
gpio-controller;
@ -164,6 +163,7 @@
gpioc: gpio@400ff080 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff080 0x40>;
interrupts = <31 2>;
label = "GPIO_2";

15
samples/sensor/max30101/boards/hexiwear_k64.overlay Normal file
View file

@ -0,0 +1,15 @@
/*
* Copyright (c) 2019, Linaro Ltd.
*
* SPDX-License-Identifier: Apache-2.0
*/
&i2c0 {
max30101@57 {
status = "okay";
};
};
&gpioa {
status = "okay";
};