michaelh/zephyr
1
0
Fork 0
Code Releases Activity

net: apps: Add sanity test changes to test_15_4

Browse source 
Add sanity test related changes to test_15_4 application in both
micro and nano kernel. config_whitelist in testcase.ini is not
accepting other than PLATFORM configs. So creating test folder
for sanity tests. src directory is still common for all.

Change-Id: Iffa4c588500367fa475aef8e0772f1c08946c5a4
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit is contained in:
Ravi kumar Veeramally 2015-10-28 17:09:13 +02:00 • committed by Anas Nashif
commit 1c0c1e4a00
14 changed files with 302 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

26
samples/microkernel/apps/network/test/test_15_4/Makefile Normal file
View file

@ -0,0 +1,26 @@
# Makefile - IP 15.4 test Makefile for nanokernel
#
# Copyright (c) 2011-2014, Wind River Systems, Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
MDEF_FILE = prj.mdef
KERNEL_TYPE = micro
PLATFORM_CONFIG ?= basic_atom
CONF_FILE = prj_$(ARCH).conf
SOURCE_DIR = $(ZEPHYR_BASE)/samples/network/test_15_4/src/
include $(ZEPHYR_BASE)/Makefile.inc
include $(ZEPHYR_BASE)/samples/network/test_15_4/Makefile.15_4

84
samples/microkernel/apps/network/test/test_15_4/README Normal file
View file

@ -0,0 +1,84 @@
802.15.4 test Application:
1) Loopback in single qemu:
$ make qemu0
This enables the dummy driver will feed sending 802.15.4 frames back to
15_4 Rx FIFO. 15_4 Rx FIFO will asseble all frames and feed it to IP Rx FIFO.
2) Loopback between two qemus without monitoring support:
$ make qemu1
Then in second window start the other qemu
$ make qemu2
If you want to run test 3) then you need to remove the pipes before
doing so.
$ make remove_pipes
3) Loopback between two qemus with monitoring support:
$ make qemu1monitor
Then in second window start the monitor (found in net/ip/tools directory)
$ ./monitor_15_4 sample.pcap
Then in third window start the other qemu
$ make qemu2monitor
If you want to run test 2) then you need to remove the pipes before
doing so.
$ make remove_pipes
Expert and more detailed instructions:
--------------------------------------
You can execute the tests manually if needed. Just follow the instructions
below.
802.15.4 test Application:
1) Loopback in single qemu:
Enable CONFIG_NETWORKING_WITH_15_4_LOOPBACK config option in prj_x86/arm.conf
to test 802.15.4. By enabling this option dummy driver will feed sending
802.15.4 frames back to 15_4 Rx FIFO. 15_4 Rx FIFO will asseble all frames
and feed it to IP Rx FIFO.
2) Loopback between two qemus:
Enable CONFIG_NETWORKING_WITH_15_4_LOOPBACK_UART config option in
prj_x86/arm.conf to send 802.15.4 frames out through QEMU UART and receive
frames through QEMU UART.
Follow below simple steps to create fifos at host.
$ mkfifo /tmp/ip-15-4-1.{in,out}
$ ln /tmp/ip-15-4-1.in /tmp/ip-15-4-2.out
$ ln /tmp/ip-15-4-1.out /tmp/ip-15-4-2.in
Open two terminals and run two qemus with below options.
$ make qemu QEMU_NUM=1 CONFIG_NETWORKING_WITH_15_4_LOOPBACK_UART=y
$ make qemu QEMU_NUM=2 CONFIG_NETWORKING_WITH_15_4_LOOPBACK_UART=y
3) Loopback between two qemus and pcap support:
Enable CONFIG_NETWORKING_WITH_15_4_LOOPBACK_UART config option in
prj_x86/arm.conf to send 802.15.4 frames out through QEMU UART and receive
frames through QEMU UART.
Follow below simple steps to create fifos at host.
$ mkfifo /tmp/ip-15-4-1.{in,out}
$ mkfifo /tmp/ip-15-4-2.{in,out}
also read net/ip/contiki/tools/README and run monitor_15.4
and then
$ make qemu QEMU_NUM=1 CONFIG_NETWORKING_WITH_15_4_LOOPBACK_UART=y
$ make qemu QEMU_NUM=2 CONFIG_NETWORKING_WITH_15_4_LOOPBACK_UART=y

16
samples/microkernel/apps/network/test/test_15_4/prj.mdef Normal file
View file

@ -0,0 +1,16 @@
% Application : Network demo
% Warning: Saving a VxMicro project file (.vpf) with the
% VxMicro Project Manager (VPM) tool will result in any
% manually entered comments being removed, along with
% any format changes being undone.
% TASK NAME PRIO ENTRY STACK GROUPS
% ==================================
TASK TASKA 7 taskA 2048 [EXE]
TASK TASKB 7 taskB 2048 [EXE]
% SEMA NAME
% =============
SEMA TASKASEM
SEMA TASKBSEM

6
samples/microkernel/apps/network/test/test_15_4/prj_arm.conf Normal file
View file

@ -0,0 +1,6 @@
CONFIG_NETWORKING=y
CONFIG_NETWORKING_WITH_LOGGING=y
CONFIG_NETWORKING_WITH_6LOWPAN=y
CONFIG_NETWORKING_WITH_15_4=y
CONFIG_NET_BUF_RX_SIZE=5
CONFIG_NET_BUF_TX_SIZE=3

8
samples/microkernel/apps/network/test/test_15_4/prj_x86.conf Normal file
View file

@ -0,0 +1,8 @@
CONFIG_NETWORKING=y
CONFIG_NETWORKING_WITH_LOGGING=y
CONFIG_NETWORKING_WITH_6LOWPAN=y
CONFIG_NETWORKING_WITH_15_4=y
CONFIG_NET_BUF_RX_SIZE=5
CONFIG_NET_BUF_TX_SIZE=3
CONFIG_NET_15_4_LOOPBACK_NUM=1
CONFIG_NET_SANITY_TEST=y

4
samples/microkernel/apps/network/test/test_15_4/testcase.ini Normal file
View file

@ -0,0 +1,4 @@
[test]
tags = net
arch_whitelist = x86
platform_whitelist = basic_atom

26
samples/network/test/test_15_4/Makefile Normal file
View file

@ -0,0 +1,26 @@
# Makefile - IP 15.4 test Makefile for nanokernel
#
# Copyright (c) 2011-2014, Wind River Systems, Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
MDEF_FILE = prj.mdef
KERNEL_TYPE = nano
PLATFORM_CONFIG ?= basic_atom
CONF_FILE = prj_$(ARCH).conf
SOURCE_DIR = $(ZEPHYR_BASE)/samples/network/test_15_4/src/
include $(ZEPHYR_BASE)/Makefile.inc
include $(ZEPHYR_BASE)/samples/network/test_15_4/Makefile.15_4

84
samples/network/test/test_15_4/README Normal file
View file

@ -0,0 +1,84 @@
802.15.4 test Application:
1) Loopback in single qemu:
$ make qemu0
This enables the dummy driver will feed sending 802.15.4 frames back to
15_4 Rx FIFO. 15_4 Rx FIFO will asseble all frames and feed it to IP Rx FIFO.
2) Loopback between two qemus without monitoring support:
$ make qemu1
Then in second window start the other qemu
$ make qemu2
If you want to run test 3) then you need to remove the pipes before
doing so.
$ make remove_pipes
3) Loopback between two qemus with monitoring support:
$ make qemu1monitor
Then in second window start the monitor (found in net/ip/tools directory)
$ ./monitor_15_4 sample.pcap
Then in third window start the other qemu
$ make qemu2monitor
If you want to run test 2) then you need to remove the pipes before
doing so.
$ make remove_pipes
Expert and more detailed instructions:
--------------------------------------
You can execute the tests manually if needed. Just follow the instructions
below.
802.15.4 test Application:
1) Loopback in single qemu:
Enable CONFIG_NETWORKING_WITH_15_4_LOOPBACK config option in prj_x86/arm.conf
to test 802.15.4. By enabling this option dummy driver will feed sending
802.15.4 frames back to 15_4 Rx FIFO. 15_4 Rx FIFO will asseble all frames
and feed it to IP Rx FIFO.
2) Loopback between two qemus:
Enable CONFIG_NETWORKING_WITH_15_4_LOOPBACK_UART config option in
prj_x86/arm.conf to send 802.15.4 frames out through QEMU UART and receive
frames through QEMU UART.
Follow below simple steps to create fifos at host.
$ mkfifo /tmp/ip-15-4-1.{in,out}
$ ln /tmp/ip-15-4-1.in /tmp/ip-15-4-2.out
$ ln /tmp/ip-15-4-1.out /tmp/ip-15-4-2.in
Open two terminals and run two qemus with below options.
$ make qemu QEMU_NUM=1 CONFIG_NETWORKING_WITH_15_4_LOOPBACK_UART=y
$ make qemu QEMU_NUM=2 CONFIG_NETWORKING_WITH_15_4_LOOPBACK_UART=y
3) Loopback between two qemus and pcap support:
Enable CONFIG_NETWORKING_WITH_15_4_LOOPBACK_UART config option in
prj_x86/arm.conf to send 802.15.4 frames out through QEMU UART and receive
frames through QEMU UART.
Follow below simple steps to create fifos at host.
$ mkfifo /tmp/ip-15-4-1.{in,out}
$ mkfifo /tmp/ip-15-4-2.{in,out}
also read net/ip/contiki/tools/README and run monitor_15.4
and then
$ make qemu QEMU_NUM=1 CONFIG_NETWORKING_WITH_15_4_LOOPBACK_UART=y
$ make qemu QEMU_NUM=2 CONFIG_NETWORKING_WITH_15_4_LOOPBACK_UART=y

1
samples/network/test/test_15_4/prj.mdef Normal file
View file

@ -0,0 +1 @@
% Application : Network demo

6
samples/network/test/test_15_4/prj_arm.conf Normal file
View file

@ -0,0 +1,6 @@
CONFIG_NETWORKING=y
CONFIG_NETWORKING_WITH_LOGGING=y
CONFIG_NETWORKING_WITH_6LOWPAN=y
CONFIG_NETWORKING_WITH_15_4=y
CONFIG_NET_BUF_RX_SIZE=5
CONFIG_NET_BUF_TX_SIZE=3

8
samples/network/test/test_15_4/prj_x86.conf Normal file
View file

@ -0,0 +1,8 @@
CONFIG_NETWORKING=y
CONFIG_NETWORKING_WITH_LOGGING=y
CONFIG_NETWORKING_WITH_6LOWPAN=y
CONFIG_NETWORKING_WITH_15_4=y
CONFIG_NET_BUF_RX_SIZE=5
CONFIG_NET_BUF_TX_SIZE=3
CONFIG_NET_15_4_LOOPBACK_NUM=1
CONFIG_NET_SANITY_TEST=y

4
samples/network/test/test_15_4/testcase.ini Normal file
View file

@ -0,0 +1,4 @@
[test]
tags = net
arch_whitelist = x86
platform_whitelist = basic_atom

1
samples/network/test_15_4/src/Makefile
View file

@ -3,5 +3,6 @@ ccflags-y += -I${srctree}/net/ip/contiki
ccflags-y += -I${srctree}/net/ip/contiki/os/lib
ccflags-y += -I${srctree}/net/ip/contiki/os
ccflags-y += -I${srctree}/net/ip
ccflags-$(CONFIG_NET_SANITY_TEST) += -I${srctree}/samples/include
obj-y = network.o

28
samples/network/test_15_4/src/network.c
View file

@ -26,6 +26,9 @@
#define PRINT printk
#endif
#ifdef CONFIG_NET_SANITY_TEST
#include <tc_util.h>
#endif
#include <net/net_core.h>
#include <net/net_socket.h>
@ -72,6 +75,11 @@ const uip_lladdr_t dest_mac = { };
static struct net_addr loopback_addr;
static struct net_addr any_addr;
#ifdef CONFIG_NET_SANITY_TEST
static int loopback = 0;
static int test_rp = TC_PASS;
#endif
/* Generated by http://www.lipsum.com/
* 2 paragraphs, 185 words, 1230 bytes of Lorem Ipsum
* The send_data() will add one null byte at the end and
@ -146,6 +154,9 @@ static void send_data(const char *taskname, struct net_context *ctx)
static void receive_data(const char *taskname, struct net_context *ctx)
{
struct net_buf *buf;
#ifdef CONFIG_NET_SANITY_TEST
int rp;
#endif
buf = net_receive(ctx, TICKS_NONE);
if (buf) {
@ -153,8 +164,25 @@ static void receive_data(const char *taskname, struct net_context *ctx)
__func__, net_buf_datalen(buf));
if (memcmp(net_buf_data(buf), lorem_ipsum, sizeof(lorem_ipsum))) {
PRINT("ERROR: data does not match\n");
#ifdef CONFIG_NET_SANITY_TEST
rp = TC_FAIL;
} else {
rp = TC_PASS;
#endif
}
net_buf_put(buf);
#ifdef CONFIG_NET_SANITY_TEST
loopback++;
test_rp = test_rp && rp;
TC_END_RESULT(rp);
if (loopback == CONFIG_NET_15_4_LOOPBACK_NUM) {
loopback = 0;
TC_END_REPORT(test_rp);
}
#endif
}
}