michaelh/zephyr
1
0
Fork 0
Code Releases Activity

tests: subsys: sd: report bus frequency, report timing correctly

Browse source 
Report bus frequency, and use correct names for the timing modes when SD
cards do not support UHS modes.

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit is contained in:
Daniel DeGrasse 2024-05-13 16:35:55 -05:00 • committed by Alberto Escolar
commit 1a256c7c21
1 changed files with 20 additions and 2 deletions
Download patch file Download diff file Expand all files Collapse all files

22
tests/subsys/sd/sdmmc/src/main.c
View file

@ -200,23 +200,41 @@ ZTEST(sd_stack, test_card_config)
zassert_equal(card.status, CARD_INITIALIZED, "Card status is not OK");
switch (card.card_speed) {
case SD_TIMING_SDR12:
TC_PRINT("Card timing: SDR12\n");
if (card.flags & SD_1800MV_FLAG) {
TC_PRINT("Card timing: SDR12\n");
} else {
/* Card uses non UHS mode timing */
TC_PRINT("Card timing: Legacy\n");
}
break;
case SD_TIMING_SDR25:
TC_PRINT("Card timing: SDR25\n");
if (card.flags & SD_1800MV_FLAG) {
TC_PRINT("Card timing: SDR25\n");
} else {
/* Card uses non UHS mode timing */
TC_PRINT("Card timing: High Speed\n");
}
break;
case SD_TIMING_SDR50:
TC_PRINT("Card timing: SDR50\n");
zassert_true(card.flags & SD_1800MV_FLAG,
"Card must support UHS mode for this timing");
break;
case SD_TIMING_SDR104:
TC_PRINT("Card timing: SDR104\n");
zassert_true(card.flags & SD_1800MV_FLAG,
"Card must support UHS mode for this timing");
break;
case SD_TIMING_DDR50:
TC_PRINT("Card timing: DDR50\n");
zassert_true(card.flags & SD_1800MV_FLAG,
"Card must support UHS mode for this timing");
break;
default:
zassert_unreachable("Card timing is not known value");
}
zassert_not_equal(card.bus_io.clock, 0, "Bus should have nonzero clock");
TC_PRINT("Bus Frequency: %d Hz\n", card.bus_io.clock);
switch (card.type) {
case CARD_SDIO:
TC_PRINT("Card type: SDIO\n");