michaelh/zephyr
1
0
Fork 0
Code Releases Activity

modem: hl7800: separate IO interrupt config

Browse source 
The interrupt config flags for an IO should be separate
from the standard IO configs because the interrupt config
is a separate API.

Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
This commit is contained in:
Ryan Erickson 2021-09-23 10:37:58 -05:00 • committed by Anas Nashif
commit 1715e39414
1 changed files with 26 additions and 37 deletions
Download patch file Download diff file Expand all files Collapse all files

57
drivers/modem/hl7800.c
View file

@ -140,11 +140,12 @@ struct mdm_control_pinconfig {
char *dev_name;
gpio_pin_t pin;
gpio_flags_t config;
gpio_flags_t irq_config;
};
#define PINCONFIG(name_, pin_, config_) \
#define PINCONFIG(name_, pin_, config_, irq_config_) \
{ \
.dev_name = name_, .pin = pin_, .config = config_ \
.dev_name = name_, .pin = pin_, .config = config_, .irq_config = irq_config_ \
}
/* pin settings */
@ -193,44 +194,37 @@ struct xmodem_packet {
static const struct mdm_control_pinconfig pinconfig[] = {
/* MDM_RESET */
PINCONFIG(DT_INST_GPIO_LABEL(0, mdm_reset_gpios),
DT_INST_GPIO_PIN(0, mdm_reset_gpios),
(GPIO_OUTPUT | GPIO_OPEN_DRAIN)),
PINCONFIG(DT_INST_GPIO_LABEL(0, mdm_reset_gpios), DT_INST_GPIO_PIN(0, mdm_reset_gpios),
(GPIO_OUTPUT | GPIO_OPEN_DRAIN), 0),
/* MDM_WAKE */
PINCONFIG(DT_INST_GPIO_LABEL(0, mdm_wake_gpios),
DT_INST_GPIO_PIN(0, mdm_wake_gpios),
(GPIO_OUTPUT | GPIO_OPEN_SOURCE)),
PINCONFIG(DT_INST_GPIO_LABEL(0, mdm_wake_gpios), DT_INST_GPIO_PIN(0, mdm_wake_gpios),
(GPIO_OUTPUT | GPIO_OPEN_SOURCE), 0),
/* MDM_PWR_ON */
PINCONFIG(DT_INST_GPIO_LABEL(0, mdm_pwr_on_gpios),
DT_INST_GPIO_PIN(0, mdm_pwr_on_gpios),
(GPIO_OUTPUT | GPIO_OPEN_DRAIN)),
PINCONFIG(DT_INST_GPIO_LABEL(0, mdm_pwr_on_gpios), DT_INST_GPIO_PIN(0, mdm_pwr_on_gpios),
(GPIO_OUTPUT | GPIO_OPEN_DRAIN), 0),
/* MDM_FAST_SHUTD */
PINCONFIG(DT_INST_GPIO_LABEL(0, mdm_fast_shutd_gpios),
DT_INST_GPIO_PIN(0, mdm_fast_shutd_gpios),
(GPIO_OUTPUT | GPIO_OPEN_DRAIN)),
DT_INST_GPIO_PIN(0, mdm_fast_shutd_gpios), (GPIO_OUTPUT | GPIO_OPEN_DRAIN),
0),
/* MDM_VGPIO */
PINCONFIG(DT_INST_GPIO_LABEL(0, mdm_vgpio_gpios),
DT_INST_GPIO_PIN(0, mdm_vgpio_gpios),
(GPIO_INPUT | GPIO_INT_EDGE_BOTH)),
PINCONFIG(DT_INST_GPIO_LABEL(0, mdm_vgpio_gpios), DT_INST_GPIO_PIN(0, mdm_vgpio_gpios),
GPIO_INPUT, GPIO_INT_EDGE_BOTH),
/* MDM_UART_DSR */
PINCONFIG(DT_INST_GPIO_LABEL(0, mdm_uart_dsr_gpios),
DT_INST_GPIO_PIN(0, mdm_uart_dsr_gpios),
(GPIO_INPUT | GPIO_INT_EDGE_BOTH)),
DT_INST_GPIO_PIN(0, mdm_uart_dsr_gpios), GPIO_INPUT, GPIO_INT_EDGE_BOTH),
/* MDM_UART_CTS */
PINCONFIG(DT_INST_GPIO_LABEL(0, mdm_uart_cts_gpios),
DT_INST_GPIO_PIN(0, mdm_uart_cts_gpios),
(GPIO_INPUT | GPIO_INT_EDGE_BOTH)),
DT_INST_GPIO_PIN(0, mdm_uart_cts_gpios), GPIO_INPUT, GPIO_INT_EDGE_BOTH),
/* MDM_GPIO6 */
PINCONFIG(DT_INST_GPIO_LABEL(0, mdm_gpio6_gpios),
DT_INST_GPIO_PIN(0, mdm_gpio6_gpios),
(GPIO_INPUT | GPIO_INT_EDGE_BOTH)),
PINCONFIG(DT_INST_GPIO_LABEL(0, mdm_gpio6_gpios), DT_INST_GPIO_PIN(0, mdm_gpio6_gpios),
GPIO_INPUT, GPIO_INT_EDGE_BOTH),
};
#define MDM_UART_DEV DEVICE_DT_GET(DT_INST_BUS(0))
@ -5753,16 +5747,11 @@ static int hl7800_init(const struct device *dev)
return -ENODEV;
}
if ((pinconfig[i].config & GPIO_INT_ENABLE) == 0) {
ret = gpio_pin_configure(ictx.gpio_port_dev[i], pinconfig[i].pin,
pinconfig[i].config);
} else {
ret = gpio_pin_interrupt_configure(ictx.gpio_port_dev[i], pinconfig[i].pin,
pinconfig[i].config);
}
if (ret) {
LOG_ERR("Error configuring io %s %d err: %d!",
pinconfig[i].dev_name, pinconfig[i].pin, ret);
LOG_ERR("Error configuring IO %s %d err: %d!", pinconfig[i].dev_name,
pinconfig[i].pin, ret);
return ret;
}
}
@ -5792,7 +5781,7 @@ static int hl7800_init(const struct device *dev)
}
ret = gpio_pin_interrupt_configure(ictx.gpio_port_dev[MDM_VGPIO],
pinconfig[MDM_VGPIO].pin,
pinconfig[MDM_VGPIO].config);
pinconfig[MDM_VGPIO].irq_config);
if (ret) {
LOG_ERR("Error config vgpio interrupt! (%d)", ret);
return ret;
@ -5809,7 +5798,7 @@ static int hl7800_init(const struct device *dev)
}
ret = gpio_pin_interrupt_configure(ictx.gpio_port_dev[MDM_UART_DSR],
pinconfig[MDM_UART_DSR].pin,
pinconfig[MDM_UART_DSR].config);
pinconfig[MDM_UART_DSR].irq_config);
if (ret) {
LOG_ERR("Error config uart dsr interrupt! (%d)", ret);
return ret;
@ -5826,7 +5815,7 @@ static int hl7800_init(const struct device *dev)
}
ret = gpio_pin_interrupt_configure(ictx.gpio_port_dev[MDM_GPIO6],
pinconfig[MDM_GPIO6].pin,
pinconfig[MDM_GPIO6].config);
pinconfig[MDM_GPIO6].irq_config);
if (ret) {
LOG_ERR("Error config gpio6 interrupt! (%d)", ret);
return ret;
@ -5843,7 +5832,7 @@ static int hl7800_init(const struct device *dev)
}
ret = gpio_pin_interrupt_configure(ictx.gpio_port_dev[MDM_UART_CTS],
pinconfig[MDM_UART_CTS].pin,
pinconfig[MDM_UART_CTS].config);
pinconfig[MDM_UART_CTS].irq_config);
if (ret) {
LOG_ERR("Error config uart cts interrupt! (%d)", ret);
return ret;