michaelh/zephyr
1
0
Fork 0
Code Releases Activity

drivers/gpio: stm32: Fix formatting

Browse source 
Fix formatting for lines > 80 chars

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit is contained in:
Erwan Gouriou 2020-10-16 16:50:55 +02:00 • committed by Kumar Gala
commit 12ef6b7d17
1 changed files with 20 additions and 10 deletions
Download patch file Download diff file Expand all files Collapse all files

30
drivers/gpio/gpio_stm32.c
View file

@ -116,7 +116,8 @@ int gpio_stm32_configure(uint32_t *base_addr, int pin, int conf, int altf)
#ifdef CONFIG_SOC_SERIES_STM32F1X
ARG_UNUSED(altf);
uint32_t temp = conf & (STM32_MODE_INOUT_MASK << STM32_MODE_INOUT_SHIFT);
uint32_t temp = conf &
(STM32_MODE_INOUT_MASK << STM32_MODE_INOUT_SHIFT);
if (temp == STM32_MODE_INPUT) {
temp = conf & (STM32_CNF_IN_MASK << STM32_CNF_IN_SHIFT);
@ -129,9 +130,11 @@ int gpio_stm32_configure(uint32_t *base_addr, int pin, int conf, int altf)
temp = conf & (STM32_PUPD_MASK << STM32_PUPD_SHIFT);
if (temp == STM32_PUPD_PULL_UP) {
LL_GPIO_SetPinPull(gpio, pin_ll, LL_GPIO_PULL_UP);
LL_GPIO_SetPinPull(gpio, pin_ll,
LL_GPIO_PULL_UP);
} else {
LL_GPIO_SetPinPull(gpio, pin_ll, LL_GPIO_PULL_DOWN);
LL_GPIO_SetPinPull(gpio, pin_ll,
LL_GPIO_PULL_DOWN);
}
LL_GPIO_SetPinMode(gpio, pin_ll, LL_GPIO_MODE_INPUT);
@ -143,25 +146,32 @@ int gpio_stm32_configure(uint32_t *base_addr, int pin, int conf, int altf)
if (temp == STM32_CNF_GP_OUTPUT) {
LL_GPIO_SetPinMode(gpio, pin_ll, LL_GPIO_MODE_OUTPUT);
} else {
LL_GPIO_SetPinMode(gpio, pin_ll, LL_GPIO_MODE_ALTERNATE);
LL_GPIO_SetPinMode(gpio, pin_ll,
LL_GPIO_MODE_ALTERNATE);
}
temp = conf & (STM32_CNF_OUT_0_MASK << STM32_CNF_OUT_0_SHIFT);
if (temp == STM32_CNF_PUSH_PULL) {
LL_GPIO_SetPinOutputType(gpio, pin_ll, LL_GPIO_OUTPUT_PUSHPULL);
LL_GPIO_SetPinOutputType(gpio, pin_ll,
LL_GPIO_OUTPUT_PUSHPULL);
} else {
LL_GPIO_SetPinOutputType(gpio, pin_ll, LL_GPIO_OUTPUT_OPENDRAIN);
LL_GPIO_SetPinOutputType(gpio, pin_ll,
LL_GPIO_OUTPUT_OPENDRAIN);
}
temp = conf & (STM32_MODE_OSPEED_MASK << STM32_MODE_OSPEED_SHIFT);
temp = conf &
(STM32_MODE_OSPEED_MASK << STM32_MODE_OSPEED_SHIFT);
if (temp == STM32_MODE_OUTPUT_MAX_2) {
LL_GPIO_SetPinSpeed(gpio, pin_ll, LL_GPIO_SPEED_FREQ_LOW);
LL_GPIO_SetPinSpeed(gpio, pin_ll,
LL_GPIO_SPEED_FREQ_LOW);
} else if (temp == STM32_MODE_OUTPUT_MAX_10) {
LL_GPIO_SetPinSpeed(gpio, pin_ll, LL_GPIO_SPEED_FREQ_MEDIUM);
LL_GPIO_SetPinSpeed(gpio, pin_ll,
LL_GPIO_SPEED_FREQ_MEDIUM);
} else {
LL_GPIO_SetPinSpeed(gpio, pin_ll, LL_GPIO_SPEED_FREQ_HIGH);
LL_GPIO_SetPinSpeed(gpio, pin_ll,
LL_GPIO_SPEED_FREQ_HIGH);
}
}
#else