michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: lora_e5_dev_board: set defaults for blackmagicprobe

Browse source 
This sets the commonly used serial port alias for blackmagicprobe, as
well as the flag to reset on connect, so that flashing works in low
power.

Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
This commit is contained in:
Fabio Baltieri 2021-09-21 19:11:15 +01:00 • committed by Christopher Friedt
commit 106f82013b
1 changed files with 1 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

1
boards/arm/lora_e5_dev_board/board.cmake
View file

@ -5,6 +5,7 @@ board_runner_args(pyocd "--flash-opt=-O reset_type=hw")
board_runner_args(pyocd "--flash-opt=-O connect_mode=under-reset") board_runner_args(pyocd "--flash-opt=-O connect_mode=under-reset")
board_runner_args(jlink "--device=STM32WLE5JC" "--speed=4000" "--reset-after-load") board_runner_args(jlink "--device=STM32WLE5JC" "--speed=4000" "--reset-after-load")
board_runner_args(stm32cubeprogrammer "--port=swd" "--reset=hw") board_runner_args(stm32cubeprogrammer "--port=swd" "--reset=hw")
board_runner_args(blackmagicprobe "--gdb-serial=/dev/ttyBmpGdb" "--connect-srst")
include(${ZEPHYR_BASE}/boards/common/pyocd.board.cmake) include(${ZEPHYR_BASE}/boards/common/pyocd.board.cmake)
include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake) include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)