diff --git a/drivers/display/ls0xx.c b/drivers/display/ls0xx.c
index 5dae3e615d5..6b699d82d78 100644
--- a/drivers/display/ls0xx.c
+++ b/drivers/display/ls0xx.c
@@ -42,31 +42,26 @@ LOG_MODULE_REGISTER(ls0xx, CONFIG_DISPLAY_LOG_LEVEL);
 #define LS0XX_BIT_VCOM        0x02
 #define LS0XX_BIT_CLEAR       0x04
 
-struct ls0xx_data {
-#if DT_INST_NODE_HAS_PROP(0, disp_en_gpios)
-	const struct device *disp_dev;
-#endif
-#if DT_INST_NODE_HAS_PROP(0, extcomin_gpios)
-	const struct device *extcomin_dev;
-#endif
-};
-
 struct ls0xx_config {
 	struct spi_dt_spec bus;
+#if DT_INST_NODE_HAS_PROP(0, disp_en_gpios)
+	struct gpio_dt_spec disp_en_gpio;
+#endif
+#if DT_INST_NODE_HAS_PROP(0, extcomin_gpios)
+	struct gpio_dt_spec extcomin_gpio;
+#endif
 };
 
 #if DT_INST_NODE_HAS_PROP(0, extcomin_gpios)
 /* Driver will handle VCOM toggling */
 static void ls0xx_vcom_toggle(void *a, void *b, void *c)
 {
-	struct ls0xx_data *driver = (struct ls0xx_data *)a;
+	const struct ls0xx_config *config = a;
 
 	while (1) {
-		gpio_pin_toggle(driver->extcomin_dev,
-				DT_INST_GPIO_PIN(0, extcomin_gpios));
+		gpio_pin_toggle_dt(&config->extcomin_gpio);
 		k_usleep(3);
-		gpio_pin_toggle(driver->extcomin_dev,
-				DT_INST_GPIO_PIN(0, extcomin_gpios));
+		gpio_pin_toggle_dt(&config->extcomin_gpio);
 		k_msleep(1000 / DT_INST_PROP(0, extcomin_frequency));
 	}
 }
@@ -78,10 +73,9 @@ struct k_thread vcom_toggle_thread;
 static int ls0xx_blanking_off(const struct device *dev)
 {
 #if DT_INST_NODE_HAS_PROP(0, disp_en_gpios)
-	struct ls0xx_data *driver = dev->data;
+	const struct ls0xx_config *config = dev->config;
 
-	return gpio_pin_set(driver->disp_dev,
-			    DT_INST_GPIO_PIN(0, disp_en_gpios), 1);
+	return gpio_pin_set_dt(&config->disp_en_gpio, 1);
 #else
 	LOG_WRN("Unsupported");
 	return -ENOTSUP;
@@ -91,10 +85,9 @@ static int ls0xx_blanking_off(const struct device *dev)
 static int ls0xx_blanking_on(const struct device *dev)
 {
 #if DT_INST_NODE_HAS_PROP(0, disp_en_gpios)
-	struct ls0xx_data *driver = dev->data;
+	const struct ls0xx_config *config = dev->config;
 
-	return gpio_pin_set(driver->disp_dev,
-			    DT_INST_GPIO_PIN(0, disp_en_gpios), 0);
+	return gpio_pin_set_dt(&config->disp_en_gpio, 0);
 #else
 	LOG_WRN("Unsupported");
 	return -ENOTSUP;
@@ -270,7 +263,6 @@ static int ls0xx_set_pixel_format(const struct device *dev,
 static int ls0xx_init(const struct device *dev)
 {
 	const struct ls0xx_config *config = dev->config;
-	struct ls0xx_data *driver = dev->data;
 
 	if (!spi_is_ready(&config->bus)) {
 		LOG_ERR("SPI bus %s not ready", config->bus.bus->name);
@@ -278,36 +270,28 @@ static int ls0xx_init(const struct device *dev)
 	}
 
 #if DT_INST_NODE_HAS_PROP(0, disp_en_gpios)
-	driver->disp_dev = device_get_binding(
-		DT_INST_GPIO_LABEL(0, disp_en_gpios));
-	if (driver->disp_dev == NULL) {
-		LOG_ERR("Could not get DISP pin port for LS0XX");
-		return -EIO;
+	if (!device_is_ready(config->disp_en_gpio.port)) {
+		LOG_ERR("DISP port device not ready");
+		return -ENODEV;
 	}
 	LOG_INF("Configuring DISP pin to OUTPUT_HIGH");
-	gpio_pin_configure(driver->disp_dev,
-			   DT_INST_GPIO_PIN(0, disp_en_gpios),
-			   GPIO_OUTPUT_HIGH);
+	gpio_pin_configure_dt(&config->disp_en_gpio, GPIO_OUTPUT_HIGH);
 #endif
 
 #if DT_INST_NODE_HAS_PROP(0, extcomin_gpios)
-	driver->extcomin_dev = device_get_binding(
-		DT_INST_GPIO_LABEL(0, extcomin_gpios));
-	if (driver->extcomin_dev == NULL) {
-		LOG_ERR("Could not get EXTCOMIN pin port for LS0XX");
-		return -EIO;
+	if (!device_is_ready(config->extcomin_gpio.port)) {
+		LOG_ERR("EXTCOMIN port device not ready");
+		return -ENODEV;
 	}
 	LOG_INF("Configuring EXTCOMIN pin");
-	gpio_pin_configure(driver->extcomin_dev,
-			   DT_INST_GPIO_PIN(0, extcomin_gpios),
-			   GPIO_OUTPUT_LOW);
+	gpio_pin_configure_dt(&config->extcomin_gpio, GPIO_OUTPUT_LOW);
 
 	/* Start thread for toggling VCOM */
 	k_tid_t vcom_toggle_tid = k_thread_create(&vcom_toggle_thread,
 						  vcom_toggle_stack,
 						  K_THREAD_STACK_SIZEOF(vcom_toggle_stack),
 						  ls0xx_vcom_toggle,
-						  driver, NULL, NULL,
+						  config, NULL, NULL,
 						  3, 0, K_NO_WAIT);
 	k_thread_name_set(vcom_toggle_tid, "ls0xx_vcom");
 #endif  /* DT_INST_NODE_HAS_PROP(0, extcomin_gpios) */
@@ -316,13 +300,17 @@ static int ls0xx_init(const struct device *dev)
 	return ls0xx_clear(dev);
 }
 
-static struct ls0xx_data ls0xx_driver;
-
 static const struct ls0xx_config ls0xx_config = {
 	.bus = SPI_DT_SPEC_INST_GET(
 		0, SPI_OP_MODE_MASTER | SPI_WORD_SET(8) |
 		SPI_TRANSFER_LSB | SPI_CS_ACTIVE_HIGH |
-		SPI_HOLD_ON_CS | SPI_LOCK_ON, 0)
+		SPI_HOLD_ON_CS | SPI_LOCK_ON, 0),
+#if DT_INST_NODE_HAS_PROP(0, disp_en_gpios)
+	.disp_en_gpio = GPIO_DT_SPEC_INST_GET(0, disp_en_gpios),
+#endif
+#if DT_INST_NODE_HAS_PROP(0, extcomin_gpios)
+	.extcomin_gpio = GPIO_DT_SPEC_INST_GET(0, extcomin_gpios),
+#endif
 };
 
 static struct display_driver_api ls0xx_driver_api = {
@@ -338,7 +326,5 @@ static struct display_driver_api ls0xx_driver_api = {
 	.set_orientation = ls0xx_set_orientation,
 };
 
-DEVICE_DT_INST_DEFINE(0, ls0xx_init, NULL,
-		      &ls0xx_driver, &ls0xx_config,
-		      POST_KERNEL, CONFIG_DISPLAY_INIT_PRIORITY,
-		      &ls0xx_driver_api);
+DEVICE_DT_INST_DEFINE(0, ls0xx_init, NULL, NULL, &ls0xx_config, POST_KERNEL,
+		      CONFIG_DISPLAY_INIT_PRIORITY, &ls0xx_driver_api);