michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: riscv: tlsr9518adk80d: add Telink B91 PWM driver support

Browse source 
Added PWM driver board support.

Signed-off-by: Yuriy Vynnychek <yura.vynnychek@telink-semi.com>
This commit is contained in:
Yuriy Vynnychek 2021-07-27 12:37:37 +03:00 • committed by Carles Cufí
commit 0c483a25ca
3 changed files with 27 additions and 2 deletions
Download patch file Download diff file Expand all files Collapse all files

3
boards/riscv/tlsr9518adk80d/Kconfig.defconfig
View file

@ -18,6 +18,9 @@ config UART_TELINK_B91
config PINMUX_TELINK_B91 config PINMUX_TELINK_B91
default y if PINMUX default y if PINMUX
config PWM_TELINK_B91
default y if PWM
config ENTROPY_TELINK_B91_TRNG config ENTROPY_TELINK_B91_TRNG
default y if ENTROPY_GENERATOR default y if ENTROPY_GENERATOR

9
boards/riscv/tlsr9518adk80d/doc/index.rst
View file

@ -1,4 +1,4 @@
.. _tlst9518adk80d: .. _tlsr9518adk80d:
Telink TLSR9518ADK80D Telink TLSR9518ADK80D
##################### #####################
@ -63,10 +63,12 @@ The Zephyr TLSR9518ADK80D board configuration supports the following hardware fe
+----------------+------------+------------------------------+ +----------------+------------+------------------------------+
| UART | on-chip | serial | | UART | on-chip | serial |
+----------------+------------+------------------------------+ +----------------+------------+------------------------------+
| FLASH (MSPI) | on-chip | flash | | PWM | on-chip | pwm |
+----------------+------------+------------------------------+ +----------------+------------+------------------------------+
| TRNG | on-chip | entopy | | TRNG | on-chip | entopy |
+----------------+------------+------------------------------+ +----------------+------------+------------------------------+
| FLASH (MSPI) | on-chip | flash |
+----------------+------------+------------------------------+
| RADIO | on-chip | ieee802154, OpenThread | | RADIO | on-chip | ieee802154, OpenThread |
+----------------+------------+------------------------------+ +----------------+------------+------------------------------+
@ -77,6 +79,8 @@ The following example projects are supported:
- samples/philosophers - samples/philosophers
- samples/basic/threads - samples/basic/threads
- samples/basic/blinky - samples/basic/blinky
- samples/basic/blinky_pwm
- samples/basic/fade_led
- samples/basic/button - samples/basic/button
- samples/subsys/nvs - samples/subsys/nvs
- samples/subsys/console/echo - samples/subsys/console/echo
@ -140,6 +144,7 @@ Peripheral's pins on the SoC are mapped to the following GPIO pins in the
- UART0 RX: PB2, TX: PB3 - UART0 RX: PB2, TX: PB3
- UART1 RX: PC6, TX: PC7 - UART1 RX: PC6, TX: PC7
- PWM Channel 0: PB4
Serial Port Serial Port
----------- -----------

17
boards/riscv/tlsr9518adk80d/tlsr9518adk80d.dts
View file

@ -16,6 +16,8 @@
led0 = &led_blue; led0 = &led_blue;
led1 = &led_green; led1 = &led_green;
sw0 = &key_1; sw0 = &key_1;
pwm-led0 = &pwm_led_blue;
pwm-0 = &pwm0;
}; };
leds { leds {
@ -42,6 +44,15 @@
}; };
}; };
pwm_leds {
compatible = "pwm-leds";
pwm_led_blue: pwm_led_0 {
pwms = <&pwm0 0 0>;
label = "PWM LED Blue";
};
};
keys { keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
key_1: button_1 { key_1: button_1 {
@ -104,6 +115,12 @@
status = "okay"; status = "okay";
}; };
&pwm0 {
status = "okay";
clock-frequency = <93750>;
pinctrl-0 = <&pwm_ch0_pb4>;
};
&flash_mspi { &flash_mspi {
partitions { partitions {
compatible = "fixed-partitions"; compatible = "fixed-partitions";