michaelh/zephyr
1
0
Fork 0
Code Releases Activity

doc: Moved Minnowboard info to wiki.

Browse source 
Moved the Minnnowboard Max information from minnowboard.rst
to the Zephyr wiki.

Change-Id: I97c2090e3a76e2ab6a9ab1e5f338fb4c3ffb0715
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
This commit is contained in:
Evan Couzens 2016-06-22 14:27:48 -07:00 • committed by Inaky Perez-Gonzalez
commit 09aca84ab3
1 changed files with 2 additions and 62 deletions
Download patch file Download diff file Expand all files Collapse all files

64
doc/board/minnowboard.rst
View file

@ -3,66 +3,6 @@
Minnowboard Max
###############
Overview
********
The board documentation for the Minnowboard Max has been moved to the Zephyr project wiki:
The minnowboard board configuration is used by Zephyr applications
that run on QEMU emulating the Atom N28xx platform. This configuration
provides support for an x86 Atom CPU and the following devices:
* HPET
* Advanced Programmed Interrupt Controller (APIC)
* NS16550 UART
.. note::
This board configuration makes no claims about its suitability for use
with an actual Atom N28xx hardware system, or any other hardware system.
Supported Features
******************
The minnowboard board configuration supports the following hardware features:
+--------------+------------+-----------------------+
| Interface | Controller | Driver/Component |
+==============+============+=======================+
| HPET | on-chip | system clock |
+--------------+------------+-----------------------+
| APIC | on-chip | interrupt controller |
+--------------+------------+-----------------------+
| NS16550 | on-chip | serial port |
| UART | | |
+--------------+------------+-----------------------+
The kernel currently does not support other hardware features on this platform.
HPET System Clock Support
=========================
The minnowboard board configuration uses a system clock frequency of 25 MHz.
.. note::
The LOAPIC timer may be used instead of the HPET. To do so,
set SYS_CLOCK_HW_CYCLES_PER_SEC to a custom value that is tied to the host system speed.
Serial Port
===========
The minnowboard board configuration uses a single serial communication channel
with a NS16550 serial driver that operates in polling mode.
For an interrupt-driven driver, enable the UART_INTERRUPT_DRIVEN kernel configuration option.
Known Problems or Limitations
*****************************
The following platform features are unsupported:
* Isolated Memory Regions
* Serial port in Direct Memory Access (DMA) mode
* Serial Peripheral Interface (SPI) flash
* General-Purpose Input/Output (GPIO)
* Inter-Integrated Circuit (I2C)
* Ethernet
* Supervisor Mode Execution Protection (SMEP)
https://wiki.zephyrproject.org/view/Minnowboard_Max