michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: st: nucleo_g0b1re: update pyocd target

Browse source 
Update the pyocd runner configuration of the nucleo_g0b1re
to use the correct target.

Pyocd had issues only just after the release of the G0B1/C1 line.
This issue has already been fixed a few releases ago.

Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit is contained in:
Thomas Stranger 2024-08-28 18:11:47 +02:00 • committed by Carles Cufí
commit 02afc352e3
2 changed files with 3 additions and 7 deletions
Download patch file Download diff file Expand all files Collapse all files

4
boards/st/nucleo_g0b1re/board.cmake
View file

@ -3,9 +3,7 @@
# keep first # keep first
board_runner_args(stm32cubeprogrammer "--port=swd" "--reset-mode=hw") board_runner_args(stm32cubeprogrammer "--port=swd" "--reset-mode=hw")
# keil.stm32g0xx_dfp.1.3.0.pack introduced stm32g0b series, but the target does board_runner_args(pyocd "--target=stm32g0b1retx")
# not work with pyocd currently.
board_runner_args(pyocd "--target=stm32g071rbtx")
board_runner_args(pyocd "--flash-opt=-O reset_type=hw") board_runner_args(pyocd "--flash-opt=-O reset_type=hw")
board_runner_args(pyocd "--flash-opt=-O connect_mode=under-reset") board_runner_args(pyocd "--flash-opt=-O connect_mode=under-reset")
board_runner_args(jlink "--device=STM32G0B1RE" "--speed=4000") board_runner_args(jlink "--device=STM32G0B1RE" "--speed=4000")

6
boards/st/nucleo_g0b1re/doc/index.rst
View file

@ -168,10 +168,8 @@ the ``--runner`` (or ``-r``) option:
$ west flash --runner jlink $ west flash --runner jlink
$ west flash --runner pyocd $ west flash --runner pyocd
Pyocd support is currently limited: As the stm32g0b1 target causes issues, For STM32G0 support pyocd needs additional target information,
the stm32g071 target is used. For STM32G0 support pyOCD needs additional target which can be installed by adding "pack" support with the following pyocd command:
information, which can be installed by adding "pack" support with the
following pyOCD commands:
.. code-block:: console .. code-block:: console