michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/modules/hal_nxp/mcux/mcux-sdk-ng/drivers/drivers.cmake

284 lines
17 KiB
CMake
Raw Normal View History

modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
# Copyright 2025 NXP
#
# SPDX-License-Identifier: Apache-2.0
# fsl_common driver
modules: hal_nxp: Load SDK common drver per architecture - The fsl_common_dsp driver needs to be loaded when building xtensa projects and the fsl_common_arm driver needs to be loaded when building arm projects. - Add a condition to load power driver, because the power driver is needed to build RT700 arm core project, but it is not needed to build hifi core project. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-04-08 21:02:38 +08:00
zephyr_library_sources(${MCUX_SDK_NG_DIR}/drivers/common/fsl_common.c)
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
zephyr_include_directories(${MCUX_SDK_NG_DIR}/drivers/common)
modules: hal_nxp: Load SDK common drver per architecture - The fsl_common_dsp driver needs to be loaded when building xtensa projects and the fsl_common_arm driver needs to be loaded when building arm projects. - Add a condition to load power driver, because the power driver is needed to build RT700 arm core project, but it is not needed to build hifi core project. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-04-08 21:02:38 +08:00
if(CONFIG_ARCH STREQUAL "xtensa")
zephyr_library_sources(${MCUX_SDK_NG_DIR}/drivers/common/fsl_common_dsp.c)
elseif(CONFIG_ARCH STREQUAL "arm")
zephyr_library_sources(${MCUX_SDK_NG_DIR}/drivers/common/fsl_common_arm.c)
endif()
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
set_variable_ifdef(CONFIG_HWINFO_MCUX_SRC_V2 CONFIG_MCUX_COMPONENT_driver.src_2)
set_variable_ifdef(CONFIG_GPIO_MCUX_IGPIO CONFIG_MCUX_COMPONENT_driver.igpio)
set_variable_ifdef(CONFIG_ADC_MCUX_LPADC CONFIG_MCUX_COMPONENT_driver.lpadc)
set_variable_ifdef(CONFIG_COUNTER_MCUX_CTIMER CONFIG_MCUX_COMPONENT_driver.ctimer)
set_variable_ifdef(CONFIG_COUNTER_MCUX_LPC_RTC CONFIG_MCUX_COMPONENT_driver.lpc_rtc)
set_variable_ifdef(CONFIG_GLIKEY_MCUX_GLIKEY CONFIG_MCUX_COMPONENT_driver.glikey)
if(CONFIG_NXP_LP_FLEXCOMM)
set_variable_ifdef(CONFIG_I2C_MCUX_LPI2C CONFIG_MCUX_COMPONENT_driver.lpflexcomm)
set_variable_ifdef(CONFIG_I2C_MCUX_LPI2C CONFIG_MCUX_COMPONENT_driver.lpflexcomm_lpi2c)
set_variable_ifdef(CONFIG_UART_MCUX_LPUART CONFIG_MCUX_COMPONENT_driver.lpflexcomm)
set_variable_ifdef(CONFIG_UART_MCUX_LPUART CONFIG_MCUX_COMPONENT_driver.lpflexcomm_lpuart)
set_variable_ifdef(CONFIG_SPI_MCUX_LPSPI CONFIG_MCUX_COMPONENT_driver.lpflexcomm)
set_variable_ifdef(CONFIG_SPI_MCUX_LPSPI CONFIG_MCUX_COMPONENT_driver.lpflexcomm_lpspi)
else()
set_variable_ifdef(CONFIG_I2C_MCUX_LPI2C CONFIG_MCUX_COMPONENT_driver.lpi2c)
set_variable_ifdef(CONFIG_UART_MCUX_LPUART CONFIG_MCUX_COMPONENT_driver.lpuart)
set_variable_ifdef(CONFIG_SPI_MCUX_LPSPI CONFIG_MCUX_COMPONENT_driver.lpspi)
endif()
set_variable_ifdef(CONFIG_DMA_MCUX_LPC CONFIG_MCUX_COMPONENT_driver.lpc_dma)
set_variable_ifdef(CONFIG_GPIO_MCUX_LPC CONFIG_MCUX_COMPONENT_driver.lpc_gpio)
set_variable_ifdef(CONFIG_NXP_PINT CONFIG_MCUX_COMPONENT_driver.pint)
set_variable_ifdef(CONFIG_NXP_PINT CONFIG_MCUX_COMPONENT_driver.inputmux)
set_variable_ifdef(CONFIG_DMA_MCUX_SMARTDMA CONFIG_MCUX_COMPONENT_driver.inputmux)
set_variable_ifdef(CONFIG_I2C_MCUX_FLEXCOMM CONFIG_MCUX_COMPONENT_driver.flexcomm)
set_variable_ifdef(CONFIG_I2C_MCUX_FLEXCOMM CONFIG_MCUX_COMPONENT_driver.flexcomm_i2c)
set_variable_ifdef(CONFIG_I2S_MCUX_FLEXCOMM CONFIG_MCUX_COMPONENT_driver.flexcomm)
set_variable_ifdef(CONFIG_I2S_MCUX_FLEXCOMM CONFIG_MCUX_COMPONENT_driver.flexcomm_i2s)
set_variable_ifdef(CONFIG_SPI_MCUX_FLEXCOMM CONFIG_MCUX_COMPONENT_driver.flexcomm)
set_variable_ifdef(CONFIG_SPI_MCUX_FLEXCOMM CONFIG_MCUX_COMPONENT_driver.flexcomm_spi)
set_variable_ifdef(CONFIG_UART_MCUX_FLEXCOMM CONFIG_MCUX_COMPONENT_driver.flexcomm)
set_variable_ifdef(CONFIG_UART_MCUX_FLEXCOMM CONFIG_MCUX_COMPONENT_driver.flexcomm_usart)
set_variable_ifdef(CONFIG_MCUX_OS_TIMER CONFIG_MCUX_COMPONENT_driver.ostimer)
set_variable_ifdef(CONFIG_PWM_MCUX_SCTIMER CONFIG_MCUX_COMPONENT_driver.sctimer)
set_variable_ifdef(CONFIG_PWM_MCUX_CTIMER CONFIG_MCUX_COMPONENT_driver.ctimer)
set_variable_ifdef(CONFIG_SOC_FLASH_LPC CONFIG_MCUX_COMPONENT_driver.flashiap)
set_variable_ifdef(CONFIG_WDT_MCUX_WWDT CONFIG_MCUX_COMPONENT_driver.wwdt)
set_variable_ifdef(CONFIG_ADC_MCUX_ADC12 CONFIG_MCUX_COMPONENT_driver.adc12)
set_variable_ifdef(CONFIG_ADC_MCUX_ADC16 CONFIG_MCUX_COMPONENT_driver.adc16)
set_variable_ifdef(CONFIG_CAN_MCUX_FLEXCAN CONFIG_MCUX_COMPONENT_driver.flexcan)
set_variable_ifdef(CONFIG_CAN_MCUX_FLEXCAN_FD CONFIG_MCUX_COMPONENT_driver.flexcan)
set_variable_ifdef(CONFIG_COUNTER_NXP_PIT CONFIG_MCUX_COMPONENT_driver.pit)
set_variable_ifdef(CONFIG_COUNTER_MCUX_RTC CONFIG_MCUX_COMPONENT_driver.rtc)
set_variable_ifdef(CONFIG_DAC_MCUX_DAC CONFIG_MCUX_COMPONENT_driver.dac)
modules: hal_nxp: Include DAC12 HAL driver Include DAC12 HAL driver in case CONFIG_DAC_MCUX_DAC12 is enabled. Signed-off-by: Florijan Plohl <florijan.plohl@norik.com>
2025-03-31 09:18:20 +02:00
set_variable_ifdef(CONFIG_DAC_MCUX_DAC12 CONFIG_MCUX_COMPONENT_driver.dac12)
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
set_variable_ifdef(CONFIG_DAC_MCUX_DAC32 CONFIG_MCUX_COMPONENT_driver.dac32)
set_variable_ifdef(CONFIG_DMA_MCUX_EDMA CONFIG_MCUX_COMPONENT_driver.dmamux)
set_variable_ifdef(CONFIG_DMA_MCUX_EDMA_V3 CONFIG_MCUX_COMPONENT_driver.dmamux)
set_variable_ifdef(CONFIG_DMA_MCUX_EDMA CONFIG_MCUX_COMPONENT_driver.edma)
set_variable_ifdef(CONFIG_DMA_MCUX_EDMA_V3 CONFIG_MCUX_COMPONENT_driver.dma3)
set_variable_ifdef(CONFIG_DMA_MCUX_EDMA_V4 CONFIG_MCUX_COMPONENT_driver.edma4)
modules: hal_nxp: migrate dma_nxp_edma driver to SDK-NG Migrate the dma_nxp_edma driver to SDK-NG. This means: 1) Adding the CMAKE logic required for compiling the module 2) Updating the HAL_NXP manifest to pull in the patches which handle the migration on the HAL side 3) Removing CMAKE logic from old mcux-sdk so that they are no longer included in the build Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
2025-06-04 14:20:25 -04:00
set_variable_ifdef(CONFIG_DMA_NXP_EDMA CONFIG_MCUX_COMPONENT_driver.edma_rev2)
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
set_variable_ifdef(CONFIG_ENTROPY_MCUX_RNGA CONFIG_MCUX_COMPONENT_driver.rnga)
set_variable_ifdef(CONFIG_ENTROPY_MCUX_TRNG CONFIG_MCUX_COMPONENT_driver.trng)
set_variable_ifdef(CONFIG_ENTROPY_MCUX_CAAM CONFIG_MCUX_COMPONENT_driver.caam)
set_variable_ifdef(CONFIG_ETH_NXP_ENET CONFIG_MCUX_COMPONENT_driver.enet)
set_variable_ifdef(CONFIG_ETH_NXP_IMX_NETC CONFIG_MCUX_COMPONENT_driver.netc)
set_variable_ifdef(CONFIG_HAS_MCUX_SMC CONFIG_MCUX_COMPONENT_driver.smc)
set_variable_ifdef(CONFIG_I2C_MCUX CONFIG_MCUX_COMPONENT_driver.i2c)
set_variable_ifdef(CONFIG_I2C_NXP_II2C CONFIG_MCUX_COMPONENT_driver.ii2c)
set_variable_ifdef(CONFIG_I3C_MCUX CONFIG_MCUX_COMPONENT_driver.i3c)
set_variable_ifdef(CONFIG_SENSOR_MCUX_ACMP CONFIG_MCUX_COMPONENT_driver.acmp)
set_variable_ifdef(CONFIG_COMPARATOR_MCUX_ACMP CONFIG_MCUX_COMPONENT_driver.acmp)
set_variable_ifdef(CONFIG_PWM_MCUX_FTM CONFIG_MCUX_COMPONENT_driver.ftm)
set_variable_ifdef(CONFIG_PWM_MCUX_TPM CONFIG_MCUX_COMPONENT_driver.tpm)
set_variable_ifdef(CONFIG_COUNTER_MCUX_TPM CONFIG_MCUX_COMPONENT_driver.tpm)
modules: hal_nxp: Include TPM HAL driver for QDEC Include TPM hal layer in case CONFIG_QDEC_TPM is enabled Signed-off-by: Peter van der Perk <peter.vanderperk@nxp.com>
2025-05-21 09:47:01 +02:00
set_variable_ifdef(CONFIG_QDEC_TPM CONFIG_MCUX_COMPONENT_driver.tpm)
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
set_variable_ifdef(CONFIG_PWM_MCUX_PWT CONFIG_MCUX_COMPONENT_driver.pwt)
set_variable_ifdef(CONFIG_COUNTER_MCUX_QTMR CONFIG_MCUX_COMPONENT_driver.qtmr_1)
set_variable_ifdef(CONFIG_PWM_MCUX_QTMR CONFIG_MCUX_COMPONENT_driver.qtmr_1)
set_variable_ifdef(CONFIG_SPI_MCUX_DSPI CONFIG_MCUX_COMPONENT_driver.dspi)
set_variable_ifdef(CONFIG_SPI_MCUX_ECSPI CONFIG_MCUX_COMPONENT_driver.ecspi)
set_variable_ifdef(CONFIG_MCUX_FLEXIO CONFIG_MCUX_COMPONENT_driver.flexio)
set_variable_ifdef(CONFIG_SPI_MCUX_FLEXIO CONFIG_MCUX_COMPONENT_driver.flexio_spi)
set_variable_ifdef(CONFIG_UART_MCUX CONFIG_MCUX_COMPONENT_driver.uart)
set_variable_ifdef(CONFIG_UART_MCUX_LPSCI CONFIG_MCUX_COMPONENT_driver.lpsci)
set_variable_ifdef(CONFIG_WDT_MCUX_WDOG CONFIG_MCUX_COMPONENT_driver.wdog)
set_variable_ifdef(CONFIG_WDT_MCUX_WDOG32 CONFIG_MCUX_COMPONENT_driver.wdog32)
set_variable_ifdef(CONFIG_COUNTER_MCUX_GPT CONFIG_MCUX_COMPONENT_driver.gpt)
set_variable_ifdef(CONFIG_MCUX_GPT_TIMER CONFIG_MCUX_COMPONENT_driver.gpt)
set_variable_ifdef(CONFIG_DISPLAY_MCUX_ELCDIF CONFIG_MCUX_COMPONENT_driver.elcdif)
set_variable_ifdef(CONFIG_MCUX_PXP CONFIG_MCUX_COMPONENT_driver.pxp)
set_variable_ifdef(CONFIG_LV_USE_GPU_NXP_PXP CONFIG_MCUX_COMPONENT_driver.pxp)
set_variable_ifdef(CONFIG_GPIO_MCUX_RGPIO CONFIG_MCUX_COMPONENT_driver.rgpio)
set_variable_ifdef(CONFIG_I2S_MCUX_SAI CONFIG_MCUX_COMPONENT_driver.sai)
set_variable_ifdef(CONFIG_DAI_NXP_SAI CONFIG_MCUX_COMPONENT_driver.sai)
set_variable_ifdef(CONFIG_MEMC_MCUX_FLEXSPI CONFIG_MCUX_COMPONENT_driver.flexspi)
set_variable_ifdef(CONFIG_PWM_MCUX CONFIG_MCUX_COMPONENT_driver.pwm)
set_variable_ifdef(CONFIG_VIDEO_MCUX_CSI CONFIG_MCUX_COMPONENT_driver.csi)
set_variable_ifdef(CONFIG_WDT_MCUX_IMX_WDOG CONFIG_MCUX_COMPONENT_driver.wdog01)
set_variable_ifdef(CONFIG_WDT_MCUX_RTWDOG CONFIG_MCUX_COMPONENT_driver.rtwdog)
set_variable_ifdef(CONFIG_HAS_MCUX_RDC CONFIG_MCUX_COMPONENT_driver.rdc)
set_variable_ifdef(CONFIG_UART_MCUX_IUART CONFIG_MCUX_COMPONENT_driver.iuart)
set_variable_ifdef(CONFIG_ADC_MCUX_12B1MSPS_SAR CONFIG_MCUX_COMPONENT_driver.adc_12b1msps_sar)
drivers: hwinfo: add nxp mcxn reset_cause implementation Implementation is specific to the NXP MCXN series. Code mostly copied from hwinfo_mcux_rcm driver. Signed-off-by: Adib Taraben <theadib@gmail.com>
2025-04-27 17:45:27 +02:00
set_variable_ifdef(CONFIG_HWINFO_MCUX_MCX_CMC CONFIG_MCUX_COMPONENT_driver.mcx_cmc)
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
set_variable_ifdef(CONFIG_HWINFO_MCUX_SRC CONFIG_MCUX_COMPONENT_driver.src)
set_variable_ifdef(CONFIG_HWINFO_MCUX_SIM CONFIG_MCUX_COMPONENT_driver.sim)
set_variable_ifdef(CONFIG_HWINFO_MCUX_RCM CONFIG_MCUX_COMPONENT_driver.rcm)
set_variable_ifdef(CONFIG_IPM_MCUX CONFIG_MCUX_COMPONENT_driver.mailbox)
set_variable_ifdef(CONFIG_MBOX_NXP_MAILBOX CONFIG_MCUX_COMPONENT_driver.mailbox)
set_variable_ifdef(CONFIG_COUNTER_MCUX_SNVS CONFIG_MCUX_COMPONENT_driver.snvs_hp)
set_variable_ifdef(CONFIG_MCUX_LPTMR_TIMER CONFIG_MCUX_COMPONENT_driver.lptmr)
set_variable_ifdef(CONFIG_COUNTER_MCUX_LPTMR CONFIG_MCUX_COMPONENT_driver.lptmr)
set_variable_ifdef(CONFIG_IMX_USDHC CONFIG_MCUX_COMPONENT_driver.usdhc)
set_variable_ifdef(CONFIG_MIPI_DSI_MCUX CONFIG_MCUX_COMPONENT_driver.mipi_dsi_split)
set_variable_ifdef(CONFIG_MIPI_DSI_MCUX_2L CONFIG_MCUX_COMPONENT_driver.mipi_dsi)
set_variable_ifdef(CONFIG_MCUX_SDIF CONFIG_MCUX_COMPONENT_driver.sdif)
set_variable_ifdef(CONFIG_ADC_MCUX_ETC CONFIG_MCUX_COMPONENT_driver.adc_etc)
set_variable_ifdef(CONFIG_MCUX_XBARA CONFIG_MCUX_COMPONENT_driver.xbara)
set_variable_ifdef(CONFIG_QDEC_MCUX CONFIG_MCUX_COMPONENT_driver.enc)
set_variable_ifdef(CONFIG_CRYPTO_MCUX_DCP CONFIG_MCUX_COMPONENT_driver.dcp)
set_variable_ifdef(CONFIG_DMA_MCUX_SMARTDMA CONFIG_MCUX_COMPONENT_driver.smartdma)
set_variable_ifdef(CONFIG_DAC_MCUX_LPDAC CONFIG_MCUX_COMPONENT_driver.dac_1)
set_variable_ifdef(CONFIG_NXP_IRQSTEER CONFIG_MCUX_COMPONENT_driver.irqsteer)
set_variable_ifdef(CONFIG_AUDIO_DMIC_MCUX CONFIG_MCUX_COMPONENT_driver.dmic)
set_variable_ifdef(CONFIG_DMA_NXP_SDMA CONFIG_MCUX_COMPONENT_driver.sdma)
set_variable_ifdef(CONFIG_ADC_MCUX_GAU CONFIG_MCUX_COMPONENT_driver.cns_adc)
set_variable_ifdef(CONFIG_DAC_MCUX_GAU CONFIG_MCUX_COMPONENT_driver.cns_dac)
set_variable_ifdef(CONFIG_DAI_NXP_ESAI CONFIG_MCUX_COMPONENT_driver.esai)
set_variable_ifdef(CONFIG_MCUX_LPCMP CONFIG_MCUX_COMPONENT_driver.lpcmp)
set_variable_ifdef(CONFIG_NXP_RF_IMU CONFIG_MCUX_COMPONENT_driver.imu)
set_variable_ifdef(CONFIG_TRDC_MCUX_TRDC CONFIG_MCUX_COMPONENT_driver.trdc)
set_variable_ifdef(CONFIG_S3MU_MCUX_S3MU CONFIG_MCUX_COMPONENT_driver.s3mu)
modules: hal_nxp: Unified to use SDK NG driver Some NXP boards are using legacy SDK driver, such as S32K, K64, MIMX8Q, and so on. The legacy SDK driver will not be updated, migrate to use SDK NG driver. Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
2025-05-08 11:02:21 +08:00
set_variable_ifdef(CONFIG_DAI_NXP_MICFIL CONFIG_MCUX_COMPONENT_driver.pdm)
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
set_variable_ifdef(CONFIG_PINCTRL_NXP_PORT CONFIG_MCUX_COMPONENT_driver.port)
set_variable_ifdef(CONFIG_DMA_NXP_EDMA CONFIG_MCUX_COMPONENT_driver.edma_soc_rev2)
set_variable_ifdef(CONFIG_COUNTER_MCUX_SNVS_SRTC CONFIG_MCUX_COMPONENT_driver.snvs_lp)
set_variable_ifdef(CONFIG_DISPLAY_MCUX_DCNANO_LCDIF CONFIG_MCUX_COMPONENT_driver.lcdif)
drivers: mipi_dbi: introduce NXP DCnano driver Introduce NXP NCNano driver using MIPI DBI class. This peripheral supports 8080 and 6800 mode. The driver also supports used with nxp,mipi_dsi_2l driver, for the panel with DPHY bus, such as g1120b0mipi. Signed-off-by: Kate Wang <yumeng.wang@nxp.com>
2025-04-14 11:14:45 +08:00
set_variable_ifdef(CONFIG_MIPI_DBI_NXP_DCNANO_LCDIF CONFIG_MCUX_COMPONENT_driver.lcdif)
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
set_variable_ifdef(CONFIG_MIPI_DBI_NXP_FLEXIO_LCDIF CONFIG_MCUX_COMPONENT_driver.flexio_mculcd)
set_variable_ifdef(CONFIG_VIDEO_MCUX_MIPI_CSI2RX CONFIG_MCUX_COMPONENT_driver.mipi_csi2rx)
set_variable_ifdef(CONFIG_ETH_NXP_IMX_NETC CONFIG_MCUX_COMPONENT_driver.netc)
set_variable_ifdef(CONFIG_ETH_NXP_IMX_NETC CONFIG_MCUX_COMPONENT_driver.netc_switch)
set_variable_ifdef(CONFIG_SOC_SERIES_IMXRT10XX CONFIG_MCUX_COMPONENT_driver.ocotp)
set_variable_ifdef(CONFIG_SOC_SERIES_IMXRT11XX CONFIG_MCUX_COMPONENT_driver.ocotp)
set_variable_ifdef(CONFIG_SOC_FAMILY_KINETIS CONFIG_MCUX_COMPONENT_driver.port)
set_variable_ifdef(CONFIG_SOC_SERIES_MCXW CONFIG_MCUX_COMPONENT_driver.ccm32k)
set_variable_ifdef(CONFIG_SOC_SERIES_IMXRT5XX CONFIG_MCUX_COMPONENT_driver.iap3)
if(CONFIG_SOC_MIMXRT1189)
set_variable_ifdef(CONFIG_ETH_NXP_IMX_NETC CONFIG_MCUX_COMPONENT_driver.netc_rt1180)
set_variable_ifdef(CONFIG_ETH_NXP_IMX_NETC CONFIG_MCUX_COMPONENT_driver.msgintr)
elseif(CONFIG_SOC_MIMX9596)
set_variable_ifdef(CONFIG_ETH_NXP_IMX_NETC CONFIG_MCUX_COMPONENT_driver.netc_imx95)
set_variable_ifdef(CONFIG_ETH_NXP_IMX_NETC CONFIG_MCUX_COMPONENT_driver.msgintr)
set_variable_ifdef(CONFIG_ETH_NXP_IMX_NETC CONFIG_MCUX_COMPONENT_driver.irqsteer)
endif()
if(CONFIG_SOC_SERIES_MCXN OR CONFIG_SOC_SERIES_MCXA)
set(CONFIG_MCUX_COMPONENT_driver.mcx_spc ON)
endif()
if(CONFIG_BT_NXP AND CONFIG_SOC_SERIES_MCXW OR CONFIG_IEEE802154_MCXW)
set(CONFIG_MCUX_COMPONENT_driver.spc ON)
endif()
if(((${MCUX_DEVICE} MATCHES "MIMXRT1[0-9][0-9][0-9]") AND (NOT (CONFIG_SOC_MIMXRT1166_CM4 OR CONFIG_SOC_MIMXRT1176_CM4 OR CONFIG_SOC_MIMXRT1189_CM33))) OR
((${MCUX_DEVICE} MATCHES "MIMX9596") AND CONFIG_SOC_MIMX9596_M7))
set_variable_ifdef(CONFIG_HAS_MCUX_CACHE CONFIG_MCUX_COMPONENT_driver.cache_armv7_m7)
elseif((${MCUX_DEVICE} MATCHES "MIMXRT(5|6)") OR (${MCUX_DEVICE} MATCHES "RW61") OR (${MCUX_DEVICE} MATCHES "MCXN.4."))
set_variable_ifdef(CONFIG_HAS_MCUX_CACHE CONFIG_MCUX_COMPONENT_driver.cache_cache64)
elseif((${MCUX_DEVICE} MATCHES "MK(28|66)") OR (${MCUX_DEVICE} MATCHES "MKE(14|16|18)") OR (CONFIG_SOC_MIMXRT1166_CM4) OR (CONFIG_SOC_MIMXRT1176_CM4))
set_variable_ifdef(CONFIG_HAS_MCUX_CACHE CONFIG_MCUX_COMPONENT_driver.cache_lmem)
endif()
set_variable_ifdef(CONFIG_HAS_MCUX_XCACHE CONFIG_MCUX_COMPONENT_driver.cache_xcache)
modules: hal_nxp: use MU1 driver for i.MX943 i.MX943 uses MU1 hal driver. Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
2025-05-08 17:02:14 +08:00
if((${MCUX_DEVICE} MATCHES "MIMX9596") OR (${MCUX_DEVICE} MATCHES "MIMX8UD7") OR (${MCUX_DEVICE} MATCHES "MIMXRT118") OR (CONFIG_SOC_MIMX94398))
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
set_variable_ifdef(CONFIG_IPM_IMX CONFIG_MCUX_COMPONENT_driver.mu1)
set_variable_ifdef(CONFIG_MBOX_NXP_IMX_MU CONFIG_MCUX_COMPONENT_driver.mu1)
else()
set_variable_ifdef(CONFIG_IPM_IMX CONFIG_MCUX_COMPONENT_driver.mu)
set_variable_ifdef(CONFIG_MBOX_NXP_IMX_MU CONFIG_MCUX_COMPONENT_driver.mu)
endif()
if(CONFIG_SOC_FAMILY_KINETIS OR CONFIG_SOC_SERIES_MCXC)
set_variable_ifdef(CONFIG_SOC_FLASH_MCUX CONFIG_MCUX_COMPONENT_driver.flash)
endif()
if(CONFIG_SOC_MK82F25615 OR CONFIG_SOC_MK64F12 OR CONFIG_SOC_MK66F18 OR
CONFIG_SOC_MKE14F16 OR CONFIG_SOC_MKE16F16 OR CONFIG_SOC_MKE18F16 OR
CONFIG_SOC_MK22F12)
modules: hal_nxp: mcux-sdk-ng: Fix cmake variable scope error The CMakeLists.txt files in folders modules/hal_nxp/mcux/mcux-sdk-ng/*/ are loaded in modules/hal_nxp/mcux/mcux-sdk-ng/CMakeLists.txt using cmake function `add_subdirectory`. One issue is, when variables defined in one CMakeLists.txt are needed by another CMakeLists.txt, then the variables need be exposed to parent scope. This is not convenient. Another issue is, to expose variables, the function `set_variable_ifdef` sets the variables as global variables. The CMake global variables named `CONFIG_xxx` will be collected by Kconfig, and results in build fail. The solution is: 1. Replace `add_subdirectory` with `include`, so that the variables will be in the same file scope, don't need to expose them. 2. Modify the implementation of `set_variable_ifdef`, don't set variables as global variables. Resolves #88135 Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
2025-04-06 21:01:16 +08:00
set(CONFIG_MCUX_COMPONENT_driver.sysmpu ON)
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
endif()
soc: nxp: mcx: MCXNx4x: update SOC to use flash_k4 driver Use flash_k4 driver for internal flash instead of ROM API driver. One benefit is the flash program phrase size decreases from 128 Bytes to 16 Bytes. 16 Byte phrases enables this SOC to leverage the Zephyr NVS subsystem, and the MCUboot swap mode. Signed-off-by: Derek Snell <derek.snell@nxp.com> Conflicts: west.yml
2025-05-28 12:52:35 -04:00
if(CONFIG_SOC_SERIES_MCXW OR CONFIG_SOC_MCXN947 OR CONFIG_SOC_MCXN547)
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
set_variable_ifdef(CONFIG_SOC_FLASH_MCUX CONFIG_MCUX_COMPONENT_driver.flash_k4)
endif()
if(CONFIG_SOC_SERIES_LPC51U68 OR CONFIG_SOC_SERIES_LPC54XXX)
set_variable_ifdef(CONFIG_SOC_FLASH_MCUX CONFIG_MCUX_COMPONENT_driver.iap)
endif()
if(CONFIG_SOC_SERIES_LPC51U68 OR CONFIG_SOC_SERIES_LPC54XXX)
set_variable_ifdef(CONFIG_ENTROPY_MCUX_RNG CONFIG_MCUX_COMPONENT_driver.rng)
endif()
if(CONFIG_SOC_SERIES_LPC55XXX)
set_variable_ifdef(CONFIG_ENTROPY_MCUX_RNG CONFIG_MCUX_COMPONENT_driver.rng_1)
if(CONFIG_SOC_LPC55S36)
set_variable_ifdef(CONFIG_SOC_FLASH_MCUX CONFIG_MCUX_COMPONENT_driver.romapi_flash)
else()
set_variable_ifdef(CONFIG_SOC_FLASH_MCUX CONFIG_MCUX_COMPONENT_driver.iap1)
endif()
endif()
if(CONFIG_SOC_SERIES_LPC51U68 OR CONFIG_SOC_SERIES_LPC54XXX OR CONFIG_SOC_SERIES_LPC55XXX)
modules: hal_nxp: mcux-sdk-ng: Fix cmake variable scope error The CMakeLists.txt files in folders modules/hal_nxp/mcux/mcux-sdk-ng/*/ are loaded in modules/hal_nxp/mcux/mcux-sdk-ng/CMakeLists.txt using cmake function `add_subdirectory`. One issue is, when variables defined in one CMakeLists.txt are needed by another CMakeLists.txt, then the variables need be exposed to parent scope. This is not convenient. Another issue is, to expose variables, the function `set_variable_ifdef` sets the variables as global variables. The CMake global variables named `CONFIG_xxx` will be collected by Kconfig, and results in build fail. The solution is: 1. Replace `add_subdirectory` with `include`, so that the variables will be in the same file scope, don't need to expose them. 2. Modify the implementation of `set_variable_ifdef`, don't set variables as global variables. Resolves #88135 Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
2025-04-06 21:01:16 +08:00
set(CONFIG_MCUX_COMPONENT_driver.lpc_iocon ON)
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
endif()
if(CONFIG_SOC_LPC55S36)
set_variable_ifdef(CONFIG_ADC_MCUX_LPADC CONFIG_MCUX_COMPONENT_driver.vref_1)
set_variable_ifdef(CONFIG_DAC_MCUX_LPDAC CONFIG_MCUX_COMPONENT_driver.vref_1)
endif()
if(CONFIG_SOC_SERIES_IMXRT5XX OR CONFIG_SOC_SERIES_IMXRT6XX)
modules: hal_nxp: mcux-sdk-ng: Fix cmake variable scope error The CMakeLists.txt files in folders modules/hal_nxp/mcux/mcux-sdk-ng/*/ are loaded in modules/hal_nxp/mcux/mcux-sdk-ng/CMakeLists.txt using cmake function `add_subdirectory`. One issue is, when variables defined in one CMakeLists.txt are needed by another CMakeLists.txt, then the variables need be exposed to parent scope. This is not convenient. Another issue is, to expose variables, the function `set_variable_ifdef` sets the variables as global variables. The CMake global variables named `CONFIG_xxx` will be collected by Kconfig, and results in build fail. The solution is: 1. Replace `add_subdirectory` with `include`, so that the variables will be in the same file scope, don't need to expose them. 2. Modify the implementation of `set_variable_ifdef`, don't set variables as global variables. Resolves #88135 Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
2025-04-06 21:01:16 +08:00
set(CONFIG_MCUX_COMPONENT_driver.lpc_iopctl ON)
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
endif()
if(CONFIG_SOC_SERIES_RW6XX)
modules: hal_nxp: mcux-sdk-ng: Fix cmake variable scope error The CMakeLists.txt files in folders modules/hal_nxp/mcux/mcux-sdk-ng/*/ are loaded in modules/hal_nxp/mcux/mcux-sdk-ng/CMakeLists.txt using cmake function `add_subdirectory`. One issue is, when variables defined in one CMakeLists.txt are needed by another CMakeLists.txt, then the variables need be exposed to parent scope. This is not convenient. Another issue is, to expose variables, the function `set_variable_ifdef` sets the variables as global variables. The CMake global variables named `CONFIG_xxx` will be collected by Kconfig, and results in build fail. The solution is: 1. Replace `add_subdirectory` with `include`, so that the variables will be in the same file scope, don't need to expose them. 2. Modify the implementation of `set_variable_ifdef`, don't set variables as global variables. Resolves #88135 Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
2025-04-06 21:01:16 +08:00
set(CONFIG_MCUX_COMPONENT_driver.ocotp_rw61x ON)
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
endif()
if(CONFIG_SOC_SERIES_IMXRT10XX)
set_variable_ifdef(CONFIG_PM_MCUX_GPC CONFIG_MCUX_COMPONENT_driver.gpc_1)
set_variable_ifdef(CONFIG_PM_MCUX_DCDC CONFIG_MCUX_COMPONENT_driver.dcdc_1)
set_variable_ifdef(CONFIG_PM_MCUX_PMU CONFIG_MCUX_COMPONENT_driver.pmu)
endif()
if(CONFIG_SOC_SERIES_IMXRT11XX)
modules: hal_nxp: mcux-sdk-ng: Fix cmake variable scope error The CMakeLists.txt files in folders modules/hal_nxp/mcux/mcux-sdk-ng/*/ are loaded in modules/hal_nxp/mcux/mcux-sdk-ng/CMakeLists.txt using cmake function `add_subdirectory`. One issue is, when variables defined in one CMakeLists.txt are needed by another CMakeLists.txt, then the variables need be exposed to parent scope. This is not convenient. Another issue is, to expose variables, the function `set_variable_ifdef` sets the variables as global variables. The CMake global variables named `CONFIG_xxx` will be collected by Kconfig, and results in build fail. The solution is: 1. Replace `add_subdirectory` with `include`, so that the variables will be in the same file scope, don't need to expose them. 2. Modify the implementation of `set_variable_ifdef`, don't set variables as global variables. Resolves #88135 Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
2025-04-06 21:01:16 +08:00
set(CONFIG_MCUX_COMPONENT_driver.romapi ON)
set(CONFIG_MCUX_COMPONENT_driver.anadig_pmu ON)
set(CONFIG_MCUX_COMPONENT_driver.pgmc ON)
set(CONFIG_MCUX_COMPONENT_driver.dcdc_2 ON)
set(CONFIG_MCUX_COMPONENT_driver.anatop_ai ON)
set(CONFIG_MCUX_COMPONENT_driver.gpc_xxx_ctrl ON)
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
set_variable_ifdef(CONFIG_VIDEO_MCUX_MIPI_CSI2RX CONFIG_MCUX_COMPONENT_driver.mipi_csi2rx_soc)
endif()
if(CONFIG_SOC_SERIES_IMXRT118X)
modules: hal_nxp: mcux-sdk-ng: Fix cmake variable scope error The CMakeLists.txt files in folders modules/hal_nxp/mcux/mcux-sdk-ng/*/ are loaded in modules/hal_nxp/mcux/mcux-sdk-ng/CMakeLists.txt using cmake function `add_subdirectory`. One issue is, when variables defined in one CMakeLists.txt are needed by another CMakeLists.txt, then the variables need be exposed to parent scope. This is not convenient. Another issue is, to expose variables, the function `set_variable_ifdef` sets the variables as global variables. The CMake global variables named `CONFIG_xxx` will be collected by Kconfig, and results in build fail. The solution is: 1. Replace `add_subdirectory` with `include`, so that the variables will be in the same file scope, don't need to expose them. 2. Modify the implementation of `set_variable_ifdef`, don't set variables as global variables. Resolves #88135 Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
2025-04-06 21:01:16 +08:00
set(CONFIG_MCUX_COMPONENT_driver.ele_base_api ON)
set(CONFIG_MCUX_COMPONENT_driver.anadig_pmu_1 ON)
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
set_variable_ifdef(CONFIG_HWINFO_MCUX_SRC_V2 CONFIG_MCUX_COMPONENT_driver.src_3)
set_variable_ifdef(CONFIG_WDT_MCUX_RTWDOG CONFIG_MCUX_COMPONENT_driver.src_3)
endif()
if(CONFIG_SOC_SERIES_MCXA)
modules: hal_nxp: mcux-sdk-ng: Fix cmake variable scope error The CMakeLists.txt files in folders modules/hal_nxp/mcux/mcux-sdk-ng/*/ are loaded in modules/hal_nxp/mcux/mcux-sdk-ng/CMakeLists.txt using cmake function `add_subdirectory`. One issue is, when variables defined in one CMakeLists.txt are needed by another CMakeLists.txt, then the variables need be exposed to parent scope. This is not convenient. Another issue is, to expose variables, the function `set_variable_ifdef` sets the variables as global variables. The CMake global variables named `CONFIG_xxx` will be collected by Kconfig, and results in build fail. The solution is: 1. Replace `add_subdirectory` with `include`, so that the variables will be in the same file scope, don't need to expose them. 2. Modify the implementation of `set_variable_ifdef`, don't set variables as global variables. Resolves #88135 Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
2025-04-06 21:01:16 +08:00
set(CONFIG_MCUX_COMPONENT_driver.romapi ON)
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
endif()
modules: hal_nxp: mcux-sdk-ng: drivers.cmake: fix flashiap inclusion Corrects Kconfig operators to set CONFIG_MCUX_COMPONENT_driver.romapi_flashiap for some MCXN SOCs. Signed-off-by: Derek Snell <derek.snell@nxp.com>
2025-06-04 16:03:37 -04:00
if(CONFIG_SOC_SERIES_MCXN AND (NOT CONFIG_SOC_MCXN947) AND (NOT CONFIG_SOC_MCXN547))
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
set_variable_ifdef(CONFIG_SOC_FLASH_MCUX CONFIG_MCUX_COMPONENT_driver.romapi_flashiap)
endif()
modules: hal_nxp: Unified to use SDK NG driver Some NXP boards are using legacy SDK driver, such as S32K, K64, MIMX8Q, and so on. The legacy SDK driver will not be updated, migrate to use SDK NG driver. Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
2025-05-08 11:02:21 +08:00
if(CONFIG_SOC_FAMILY_NXP_IMXRT)
set_variable_ifdef(CONFIG_ETH_NXP_ENET CONFIG_MCUX_COMPONENT_driver.ocotp)
endif()
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
set_variable_ifdef(CONFIG_SOC_SERIES_MCXW CONFIG_MCUX_COMPONENT_driver.elemu)
modules: hal_nxp: Unified to use SDK NG driver Some NXP boards are using legacy SDK driver, such as S32K, K64, MIMX8Q, and so on. The legacy SDK driver will not be updated, migrate to use SDK NG driver. Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
2025-05-08 11:02:21 +08:00
#specific operation to shared drivers
if((DEFINED CONFIG_FLASH_MCUX_FLEXSPI_XIP) AND (DEFINED CONFIG_FLASH))
zephyr_code_relocate(FILES ${MCUX_SDK_NG_DIR}/drivers/flexspi/fsl_flexspi.c
LOCATION ${CONFIG_FLASH_MCUX_FLEXSPI_XIP_MEM}_TEXT)
endif()
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo Move hal_nxp glue layer to zephyr repo. Fix build warnings and failures caused by hal_nxp upgrade. Update manifest to contain hal_nxp changes. Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2025-03-12 12:12:31 +08:00
# Load all drivers
mcux_load_all_cmakelists_in_directory(${SdkRootDirPath}/drivers)
Copy permalink