zephyr/boards/arm/arduino_zero/arduino_zero.yaml

identifier: arduino_zero
name: Arduino Zero
type: mcu
arch: arm
ram: 32
flash: 256
toolchain:
  - zephyr
  - gnuarmemb
  - xtools
supported:
  - adc
  - counter
  - dac
  - dma
  - gpio
  - hwinfo
  - pwm
  - spi
  - uart
  - usb_device
  - watchdog
vendor: arduino
boards: add board and DTS definitions for the Arduino Zero. Signed-off-by: Michael Hope <mlhx@google.com> 2017-11-22 09:01:18 +01:00			`identifier: arduino_zero`
			`name: Arduino Zero`
			`type: mcu`
			`arch: arm`
			`ram: 32`
			`flash: 256`
			`toolchain:`
			`- zephyr`
build: Replace GCC ARM Embedded with GNU Arm Embedded The old GCC ARM Embedded website on launchpad (https://launchpad.net/gcc-arm-embedded) has been superseeded by the new GNU Arm Embedded one (https://developer.arm.com/open-source/gnu-toolchain/gnu-rm). This also means a change of name from "GCC" to "GNU". Reflect this in the enviroment variables so that the proper term is used henceforth. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> 2018-08-03 17:11:23 +02:00			`- gnuarmemb`
boards: arm: Add xtools as a supported toolchain Update all ARM boards to have xtools as a supported toolchain. Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2019-01-09 10:25:16 -06:00			`- xtools`
boards: arm: reduce the default drivers for the Arduino Zero Now that the SAM0 SOC selects the appropriate SAM0 driver for a class, reduce the drivers that are compiled in by default on the Arduino Zero. This reduces the size of `blink` from ~14 KiB to ~10 KiB. Also add the supported features to arduino_zero.yaml to get more coverage in the sanity tests. Signed-off-by: Michael Hope <mlhx@google.com> 2020-06-12 21:01:19 +02:00			`supported:`
			`- adc`
			`- counter`
boards: arm: document and enable the DAC for the Arduino Zero The previous commits added the SAM0 DAC driver. Now document and enable it, including enabling it in the DAC sample. Signed-off-by: Michael Hope <mlhx@google.com> 2020-07-04 15:32:19 +02:00			`- dac`
boards: arm: reduce the default drivers for the Arduino Zero Now that the SAM0 SOC selects the appropriate SAM0 driver for a class, reduce the drivers that are compiled in by default on the Arduino Zero. This reduces the size of `blink` from ~14 KiB to ~10 KiB. Also add the supported features to arduino_zero.yaml to get more coverage in the sanity tests. Signed-off-by: Michael Hope <mlhx@google.com> 2020-06-12 21:01:19 +02:00			`- dma`
			`- gpio`
			`- hwinfo`
boards: arm: enable PWM on the Arduino Zero This enables PWM and connects it to the main LED. Tested by running samples/basic/blinky_pwm and /fade_led. Signed-off-by: Michael Hope <mlhx@google.com> 2020-06-12 22:01:44 +02:00			`- pwm`
boards: arm: reduce the default drivers for the Arduino Zero Now that the SAM0 SOC selects the appropriate SAM0 driver for a class, reduce the drivers that are compiled in by default on the Arduino Zero. This reduces the size of `blink` from ~14 KiB to ~10 KiB. Also add the supported features to arduino_zero.yaml to get more coverage in the sanity tests. Signed-off-by: Michael Hope <mlhx@google.com> 2020-06-12 21:01:19 +02:00			`- spi`
			`- uart`
			`- usb_device`
			`- watchdog`
boards: add vendor to board yaml This is coming from devicetree and corrosponds to what we have in the dts/bindings/vendor-prefixes.txt file. This will allow for static filtering, especially with twister, i.e. no need to build anything to know the vendor of a board All of the vendor data was extracted automatically from the devicetree, so some platforms might not have the right vendor or no vendor at all right now, we need to fix some of the DTS information or do this manually to get this 100% correct. But we are close. Signed-off-by: Anas Nashif <anas.nashif@intel.com> 2023-06-22 18:47:45 +00:00			`vendor: arduino`