michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/samples/subsys/ipc/openamp/remote/CMakeLists.txt

22 lines
678 B
Text
Raw Normal View History

cmake: increase minimal required version to 3.20.0 Move to CMake 3.20.0. At the Toolchain WG it was decided to move to CMake 3.20.0. The main reason for increasing CMake version is better toolchain support. Better toolchain support is added in the following CMake versions: - armclang, CMake 3.15 - Intel oneAPI, CMake 3.20 - IAR, CMake 3.15 and 3.20 Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
2021-08-10 14:44:56 +02:00
cmake_minimum_required(VERSION 3.20.0)
sample: add OpenAMP sample application This commit adds a sample application using OpenAMP for remote procedure calls on the LPCXpresso54114. It is adapted from the RPMsg-Lite sample application added in PR #5960, and uses the IPM driver to provide interprocessor interrupts. Signed-off-by: Kristian Klomsten Skordal <kristian.skordal@nordicsemi.no> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-02-12 15:19:05 +01:00
# Copyright (c) 2018 Nordic Semiconductor ASA
samples: openamp: Remove exclusive compile of openAMP Add configuable shared memory address for openAMP samples. There is a plan to add more platforms supported for openAMP in zephyr. Each platform can specify the shared memory address and device by device tree and add it's support in openAMP samples. Signed-off-by: Karl Zhang <karl.zhang@linaro.org> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-07-11 21:49:30 +08:00
# Copyright (c) 2019 Linaro Limited
sample: add OpenAMP sample application This commit adds a sample application using OpenAMP for remote procedure calls on the LPCXpresso54114. It is adapted from the RPMsg-Lite sample application added in PR #5960, and uses the IPM driver to provide interprocessor interrupts. Signed-off-by: Kristian Klomsten Skordal <kristian.skordal@nordicsemi.no> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-02-12 15:19:05 +01:00
#
# SPDX-License-Identifier: Apache-2.0
#
samples: openamp: Add support for mps2_an521 AN521 is a dual core FPGA on MPS2+ with both cores are CM33. Add openAMP to support on it. Core 0 is primary core, it runs as master, core 1 is remote, it runs as slave. Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
2019-07-15 18:39:41 +08:00
if(("${BOARD}" STREQUAL "lpcxpresso54114_m0")
samples: openamp: add lpc55s69 support Adds support for lpcxpresso55s69_cpu0 in openamp sample. Some changes made to the sample. Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
2020-12-16 21:20:33 +02:00
OR "${BOARD}" STREQUAL "lpcxpresso55s69_cpu1"
samples: openamp: use mps2_an521_remote target for remote core When building and running the openamp sample on MPS2 AN521, use the mps2_an521_remote target to build the Zephyr image for the remote core. Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2021-04-26 16:32:57 +02:00
OR "${BOARD}" STREQUAL "mps2_an521_remote"
boards: arm: v2m_musca_b1: Rename NS target This commit update the NS board variant from `v2m_musca_b1_nonsecure` to `v2m_musca_b1_ns` to maintain consistency across zephyr. Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
2021-07-07 11:21:11 +02:00
OR "${BOARD}" STREQUAL "v2m_musca_b1_ns")
cmake: Update messages mode using INFO to the correct mode STATUS Search and replace `message(INFO " ` with `message(STATUS "`. This would otherwise print "INFO <message" Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
2021-12-15 09:28:09 +01:00
message(STATUS "${BOARD} compiles as remote in this sample")
samples: openamp: Remove exclusive compile of openAMP Add configuable shared memory address for openAMP samples. There is a plan to add more platforms supported for openAMP in zephyr. Each platform can specify the shared memory address and device by device tree and add it's support in openAMP samples. Signed-off-by: Karl Zhang <karl.zhang@linaro.org> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-07-11 21:49:30 +08:00
else()
message(FATAL_ERROR "${BOARD} was not supported for this sample")
endif()
sample: add OpenAMP sample application This commit adds a sample application using OpenAMP for remote procedure calls on the LPCXpresso54114. It is adapted from the RPMsg-Lite sample application added in PR #5960, and uses the IPM driver to provide interprocessor interrupts. Signed-off-by: Kristian Klomsten Skordal <kristian.skordal@nordicsemi.no> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-02-12 15:19:05 +01:00
samples: make find_package(Zephyr...) REQUIRED This provides a better error message when building with CMake and forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package registry. See parent commit for more details (split from parent for better readability). Signed-off-by: Marc Herbert <marc.herbert@intel.com>
2020-05-28 21:02:17 -07:00
find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
samples, tests: Use semi-accurate project names When using an IDE (e.g. Eclipse, Qt Creator), the project name gets displayed. This greatly simplifies the navigation between projects when having many of them open at the same time. Naming every project "NONE" defeats this functionality. This patch tries to use sensible project names while not duplicating too much of what is already represented in the path. This is done by using the name of the directory the relevant CMakeLists.txt file is stored in. To ensure unique project names in the samples (and again, in the tests folder) folder, small manual adjustments have been done. Signed-off-by: Reto Schneider <code@reto-schneider.ch>
2018-10-25 16:54:09 +02:00
project(openamp_remote)
sample: add OpenAMP sample application This commit adds a sample application using OpenAMP for remote procedure calls on the LPCXpresso54114. It is adapted from the RPMsg-Lite sample application added in PR #5960, and uses the IPM driver to provide interprocessor interrupts. Signed-off-by: Kristian Klomsten Skordal <kristian.skordal@nordicsemi.no> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-02-12 15:19:05 +01:00
samples: openamp: Update sample to OpenAMP v2018.10 release The v2018.10 release of OpenAMP reworks the API set and splits the remoteproc vs rpmsg interfaces so one can use rpmsg without remoteproc. This helps drastically reduce the code footprint utilized by OpenAMP. The remote see around 4k reduction in code size. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-05-08 19:10:26 -05:00
target_sources(app PRIVATE src/main.c)
target_include_directories(app PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/..)
Copy permalink