michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/boards/arm/frdm_k64f/Kconfig.defconfig

160 lines
1.7 KiB
Text
Raw Normal View History

nxp_kinetis: Add Kconfig options to configure clocks Many Kinetis SoCs contain an Oscillator (OSC) module and a Multipurpose Clock Generator (MCG) module to configure clocks. Adding options to configure these modules for PLL operation with different external oscillator frequencies, which can vary across boards. More options may be added later to support other clocking modes such as FLL. Jira: ZEP-715 Change-Id: Ia121cc5b464d7e681883507bd756d331a8abd6ef Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-07-19 16:09:07 -05:00
# Kconfig - FRDM-K64F board
#
# Copyright (c) 2016, Freescale Semiconductor, Inc.
#
license: Replace Apache boilerplate with SPDX tag Replace the existing Apache 2.0 boilerplate header with an SPDX tag throughout the zephyr code tree. This patch was generated via a script run over the master branch. Also updated doc/porting/application.rst that had a dependency on line numbers in a literal include. Manually updated subsys/logging/sys_log.c that had a malformed header in the original file. Also cleanup several cases that already had a SPDX tag and we either got a duplicate or missed updating. Jira: ZEP-1457 Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c Signed-off-by: David B. Kinder <david.b.kinder@intel.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-01-18 17:01:01 -08:00
# SPDX-License-Identifier: Apache-2.0
nxp_kinetis: Add Kconfig options to configure clocks Many Kinetis SoCs contain an Oscillator (OSC) module and a Multipurpose Clock Generator (MCG) module to configure clocks. Adding options to configure these modules for PLL operation with different external oscillator frequencies, which can vary across boards. More options may be added later to support other clocking modes such as FLL. Jira: ZEP-715 Change-Id: Ia121cc5b464d7e681883507bd756d331a8abd6ef Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-07-19 16:09:07 -05:00
#
build: switch to board based configurations Define boards based on platforms/SoCs and define them under boards/. Also unify the naming of all platform, SoC and board files and use platform.h for platforms and board.h for boards. Change-Id: Icfeb96479ab5800aca98c80a79bdc3cecd645314 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2015-12-13 09:31:16 -05:00
rename fsl_frdm_k64f -> frdm_k64f Shorten the name and remove the vendor prefix. No need to add vendor to board names. Change-Id: I68d441121c4034276706da63d7e5420ddf317149 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2015-12-25 23:38:11 -05:00
if BOARD_FRDM_K64F
build: switch to board based configurations Define boards based on platforms/SoCs and define them under boards/. Also unify the naming of all platform, SoC and board files and use platform.h for platforms and board.h for boards. Change-Id: Icfeb96479ab5800aca98c80a79bdc3cecd645314 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2015-12-13 09:31:16 -05:00
config BOARD
Cleanup whitespace in Kconfig files Convert leading whitespace into tabs in Kconfig files. Also replaced double spaces between config and <prompt>. Change-Id: I341c718ecf4143529b477c239bbde88e18f37062 Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2016-05-24 18:17:13 -05:00
default frdm_k64f
build: switch to board based configurations Define boards based on platforms/SoCs and define them under boards/. Also unify the naming of all platform, SoC and board files and use platform.h for platforms and board.h for boards. Change-Id: Icfeb96479ab5800aca98c80a79bdc3cecd645314 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2015-12-13 09:31:16 -05:00
nxp_kinetis: Add Kconfig options to configure clocks Many Kinetis SoCs contain an Oscillator (OSC) module and a Multipurpose Clock Generator (MCG) module to configure clocks. Adding options to configure these modules for PLL operation with different external oscillator frequencies, which can vary across boards. More options may be added later to support other clocking modes such as FLL. Jira: ZEP-715 Change-Id: Ia121cc5b464d7e681883507bd756d331a8abd6ef Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-07-19 16:09:07 -05:00
config OSC_XTAL0_FREQ
default 50000000
config MCG_PRDIV0
default 0x13
config MCG_VDIV0
default 0x18
config MCG_FCRDIV
default 1
frdm_k64f: hexiwear_k64: Add defaults for the mcux serial driver Jira: ZEP-719 Change-Id: I4e325df0d91b93ec832a50a24a8f3c34778281e8 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-01-09 13:26:17 -06:00
if UART_MCUX
config UART_MCUX_0
def_bool y if UART_CONSOLE
config UART_MCUX_3
def_bool y if BLUETOOTH_UART
endif # UART_MCUX
k64: Move driver instance defconfigs to boards The k64 SoC has multiple instances of many peripherals, but which instances can actually be used depends upon the board design and pinmux configuration. Move all instance-specific default driver configurations from the SoC to the boards (frdm_k64f and hexiwear_k64). Default driver selection remains in the SoC (e.g., enable the KSDK I2C driver when I2C is enabled). This paves the way to support different driver defaults for the frdm_k64f and hexiwear_k64 boards, but it does not yet change any of the default values; it only changes where the default values get set. Change-Id: Id9ed898762eb400ecefeac91ae4dce66da05622d Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-11-03 21:17:33 -05:00
config PINMUX
def_bool y
pinmux: Rename ksdk to mcux Renames the ksdk pinmux driver to mcux. Change-Id: I7a519318b5b580c47b6f6652a2ae763067d85033 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-01-02 15:07:42 -06:00
if PINMUX_MCUX
frdm_k64f: Add pin init using ksdk pinmux driver Some pins were not brought forward from the existing pin init in drivers/pinmux/k64/pinmux_board_frdm_64f.c because they do not appear to be used anywhere and it increases power consumption to enable them. For example, 6 pins were enabled as analog inputs, but there is not yet an ADC driver for the k64. The pins that were not brought forward are: * PTA 0-2 * PTB 2,3,9-11,23 * PTC 2-4,10,11 Jira: ZEP-1393 Change-Id: I7410f6d993bd0a4df8f80df72e84def73bcf74cc Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-11-23 15:09:33 -06:00
pinmux: Rename ksdk to mcux Renames the ksdk pinmux driver to mcux. Change-Id: I7a519318b5b580c47b6f6652a2ae763067d85033 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-01-02 15:07:42 -06:00
config PINMUX_MCUX_PORTA
frdm_k64f: Add pin init using ksdk pinmux driver Some pins were not brought forward from the existing pin init in drivers/pinmux/k64/pinmux_board_frdm_64f.c because they do not appear to be used anywhere and it increases power consumption to enable them. For example, 6 pins were enabled as analog inputs, but there is not yet an ADC driver for the k64. The pins that were not brought forward are: * PTA 0-2 * PTB 2,3,9-11,23 * PTC 2-4,10,11 Jira: ZEP-1393 Change-Id: I7410f6d993bd0a4df8f80df72e84def73bcf74cc Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-11-23 15:09:33 -06:00
def_bool y
pinmux: Rename ksdk to mcux Renames the ksdk pinmux driver to mcux. Change-Id: I7a519318b5b580c47b6f6652a2ae763067d85033 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-01-02 15:07:42 -06:00
config PINMUX_MCUX_PORTB
frdm_k64f: Add pin init using ksdk pinmux driver Some pins were not brought forward from the existing pin init in drivers/pinmux/k64/pinmux_board_frdm_64f.c because they do not appear to be used anywhere and it increases power consumption to enable them. For example, 6 pins were enabled as analog inputs, but there is not yet an ADC driver for the k64. The pins that were not brought forward are: * PTA 0-2 * PTB 2,3,9-11,23 * PTC 2-4,10,11 Jira: ZEP-1393 Change-Id: I7410f6d993bd0a4df8f80df72e84def73bcf74cc Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-11-23 15:09:33 -06:00
def_bool y
pinmux: Rename ksdk to mcux Renames the ksdk pinmux driver to mcux. Change-Id: I7a519318b5b580c47b6f6652a2ae763067d85033 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-01-02 15:07:42 -06:00
config PINMUX_MCUX_PORTC
frdm_k64f: Add pin init using ksdk pinmux driver Some pins were not brought forward from the existing pin init in drivers/pinmux/k64/pinmux_board_frdm_64f.c because they do not appear to be used anywhere and it increases power consumption to enable them. For example, 6 pins were enabled as analog inputs, but there is not yet an ADC driver for the k64. The pins that were not brought forward are: * PTA 0-2 * PTB 2,3,9-11,23 * PTC 2-4,10,11 Jira: ZEP-1393 Change-Id: I7410f6d993bd0a4df8f80df72e84def73bcf74cc Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-11-23 15:09:33 -06:00
def_bool y
pinmux: Rename ksdk to mcux Renames the ksdk pinmux driver to mcux. Change-Id: I7a519318b5b580c47b6f6652a2ae763067d85033 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-01-02 15:07:42 -06:00
config PINMUX_MCUX_PORTD
frdm_k64f: Disable unused pinmux ports by default Enable PORTD on the frdm_k64f only if SPI_0 is enabled. Otherwise, there are no pins in the pinmux table for this port and it should be left disabled. Change-Id: I7f8a05552f6a320debfd11a780be1092da831101 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-12-18 18:11:58 -06:00
def_bool y if SPI_0
frdm_k64f: Add pin init using ksdk pinmux driver Some pins were not brought forward from the existing pin init in drivers/pinmux/k64/pinmux_board_frdm_64f.c because they do not appear to be used anywhere and it increases power consumption to enable them. For example, 6 pins were enabled as analog inputs, but there is not yet an ADC driver for the k64. The pins that were not brought forward are: * PTA 0-2 * PTB 2,3,9-11,23 * PTC 2-4,10,11 Jira: ZEP-1393 Change-Id: I7410f6d993bd0a4df8f80df72e84def73bcf74cc Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-11-23 15:09:33 -06:00
pinmux: Rename ksdk to mcux Renames the ksdk pinmux driver to mcux. Change-Id: I7a519318b5b580c47b6f6652a2ae763067d85033 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-01-02 15:07:42 -06:00
config PINMUX_MCUX_PORTE
frdm_k64f: Add pin init using ksdk pinmux driver Some pins were not brought forward from the existing pin init in drivers/pinmux/k64/pinmux_board_frdm_64f.c because they do not appear to be used anywhere and it increases power consumption to enable them. For example, 6 pins were enabled as analog inputs, but there is not yet an ADC driver for the k64. The pins that were not brought forward are: * PTA 0-2 * PTB 2,3,9-11,23 * PTC 2-4,10,11 Jira: ZEP-1393 Change-Id: I7410f6d993bd0a4df8f80df72e84def73bcf74cc Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-11-23 15:09:33 -06:00
def_bool y
pinmux: Rename ksdk to mcux Renames the ksdk pinmux driver to mcux. Change-Id: I7a519318b5b580c47b6f6652a2ae763067d85033 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-01-02 15:07:42 -06:00
endif # PINMUX_MCUX
frdm_k64f: Add pin init using ksdk pinmux driver Some pins were not brought forward from the existing pin init in drivers/pinmux/k64/pinmux_board_frdm_64f.c because they do not appear to be used anywhere and it increases power consumption to enable them. For example, 6 pins were enabled as analog inputs, but there is not yet an ADC driver for the k64. The pins that were not brought forward are: * PTA 0-2 * PTB 2,3,9-11,23 * PTC 2-4,10,11 Jira: ZEP-1393 Change-Id: I7410f6d993bd0a4df8f80df72e84def73bcf74cc Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-11-23 15:09:33 -06:00
frdm_k64f: hexiwear_k64: Add defaults for the mcux gpio driver Jira: ZEP-1394 Change-Id: I1371e5a1a65dd85a8dd93b2c5d113d7520d5656f Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-12-12 11:15:27 -06:00
if GPIO_MCUX
config GPIO_MCUX_PORTA
def_bool y
config GPIO_MCUX_PORTB
def_bool y
config GPIO_MCUX_PORTC
def_bool y
config GPIO_MCUX_PORTD
def_bool y
config GPIO_MCUX_PORTE
def_bool y
endif # GPIO_MCUX
k64: Move driver instance defconfigs to boards The k64 SoC has multiple instances of many peripherals, but which instances can actually be used depends upon the board design and pinmux configuration. Move all instance-specific default driver configurations from the SoC to the boards (frdm_k64f and hexiwear_k64). Default driver selection remains in the SoC (e.g., enable the KSDK I2C driver when I2C is enabled). This paves the way to support different driver defaults for the frdm_k64f and hexiwear_k64 boards, but it does not yet change any of the default values; it only changes where the default values get set. Change-Id: Id9ed898762eb400ecefeac91ae4dce66da05622d Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-11-03 21:17:33 -05:00
if I2C
config I2C_0
def_bool y
if I2C_0
config I2C_0_DEFAULT_CFG
default 0x12
endif # I2C_0
config I2C_1
def_bool n
if I2C_1
config I2C_1_DEFAULT_CFG
default 0x12
endif # I2C_1
endif # I2C
frdm_k64f: Enable adc driver instance and pins Enables a usable adc driver instance based on the board design and configures the pinmux to enable the SoC's PTB10 pin, which is routed to the Arduino header A2 pin. Updates the board documentation to reflect that the board now supports an adc driver. Jira: ZEP-1396 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-06-07 07:13:55 -05:00
if ADC
config ADC_1
def_bool y
endif # ADC
frdm_k64f: Add fxos8700 defaults Add defaults for the fxos8700 sensor, including which i2c instance, the slave address, and interrupt pin. Change-Id: I4b0255308fd5c9b7c43f0f22e8ce2fe86c5e7011 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-11-27 15:27:35 -06:00
if FXOS8700
config FXOS8700_I2C_ADDRESS
default 0x1d
config FXOS8700_GPIO_NAME
frdm_k64f: hexiwear_k64: Remove defaults for the k64 gpio driver Jira: ZEP-1394 Change-Id: Ie0dd812ebca6306413300c6160f00ee764ebd4c2 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-01-10 10:12:15 -06:00
default GPIO_MCUX_PORTC_NAME
frdm_k64f: Add fxos8700 defaults Add defaults for the fxos8700 sensor, including which i2c instance, the slave address, and interrupt pin. Change-Id: I4b0255308fd5c9b7c43f0f22e8ce2fe86c5e7011 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-11-27 15:27:35 -06:00
config FXOS8700_GPIO_PIN
default 13
endif # FXOS8700
k64: Move driver instance defconfigs to boards The k64 SoC has multiple instances of many peripherals, but which instances can actually be used depends upon the board design and pinmux configuration. Move all instance-specific default driver configurations from the SoC to the boards (frdm_k64f and hexiwear_k64). Default driver selection remains in the SoC (e.g., enable the KSDK I2C driver when I2C is enabled). This paves the way to support different driver defaults for the frdm_k64f and hexiwear_k64 boards, but it does not yet change any of the default values; it only changes where the default values get set. Change-Id: Id9ed898762eb400ecefeac91ae4dce66da05622d Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-11-03 21:17:33 -05:00
if PWM_K64_FTM
config PWM_K64_FTM_0
def_bool y
endif # PWM_K64_FTM
if SPI
config SPI_0
def_bool y
config SPI_0_IRQ_PRI
default 3
config SPI_1
def_bool n
config SPI_1_IRQ_PRI
default 3
config SPI_2
def_bool n
config SPI_2_IRQ_PRI
default 3
endif # SPI
boards: frdm_k64f: enable ethernet for networking Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2017-06-30 15:10:15 -04:00
if NETWORKING
config NET_L2_ETHERNET
def_bool y
k64: Move driver instance defconfigs to boards The k64 SoC has multiple instances of many peripherals, but which instances can actually be used depends upon the board design and pinmux configuration. Move all instance-specific default driver configurations from the SoC to the boards (frdm_k64f and hexiwear_k64). Default driver selection remains in the SoC (e.g., enable the KSDK I2C driver when I2C is enabled). This paves the way to support different driver defaults for the frdm_k64f and hexiwear_k64 boards, but it does not yet change any of the default values; it only changes where the default values get set. Change-Id: Id9ed898762eb400ecefeac91ae4dce66da05622d Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-11-03 21:17:33 -05:00
ethernet: Rename ksdk to mcux Renames the ksdk ethernet shim driver to mcux. Change-Id: Ief03eabe4ce39be0d0896543c1cb660ff380b439 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-01-02 14:03:19 -06:00
config ETH_MCUX_0
k64: Move driver instance defconfigs to boards The k64 SoC has multiple instances of many peripherals, but which instances can actually be used depends upon the board design and pinmux configuration. Move all instance-specific default driver configurations from the SoC to the boards (frdm_k64f and hexiwear_k64). Default driver selection remains in the SoC (e.g., enable the KSDK I2C driver when I2C is enabled). This paves the way to support different driver defaults for the frdm_k64f and hexiwear_k64 boards, but it does not yet change any of the default values; it only changes where the default values get set. Change-Id: Id9ed898762eb400ecefeac91ae4dce66da05622d Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-11-03 21:17:33 -05:00
def_bool y
boards: frdm_k64f: enable ethernet for networking Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2017-06-30 15:10:15 -04:00
endif # NETWORKING
k64: Move driver instance defconfigs to boards The k64 SoC has multiple instances of many peripherals, but which instances can actually be used depends upon the board design and pinmux configuration. Move all instance-specific default driver configurations from the SoC to the boards (frdm_k64f and hexiwear_k64). Default driver selection remains in the SoC (e.g., enable the KSDK I2C driver when I2C is enabled). This paves the way to support different driver defaults for the frdm_k64f and hexiwear_k64 boards, but it does not yet change any of the default values; it only changes where the default values get set. Change-Id: Id9ed898762eb400ecefeac91ae4dce66da05622d Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-11-03 21:17:33 -05:00
kinetis: reorganise soc directory using soc family Add Kinetis SoC family and rename fsl_frdm_k64f to mk64f12. This will allow adding new SoCs of the same family and the reuse of code among SoCs of the family and series. Change-Id: Iea1a663aef7ce0487f147bdd36f668bebe80deb5 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-04-02 23:35:35 -04:00
endif # BOARD_FRDM_K64F
Copy permalink