michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/dts/bindings/flash_controller/st,stm32wb-flash-controller.yaml

17 lines
370 B
YAML
Raw Permalink Normal View History

dts: bindings: Remove 'title:' and put all info. into 'description:' Add any useful information from 'title:' to the 'description:' strings (e.g. explanations of acronyms), and remove 'title:' as well as any copy-pasted "this binding gives a ..." boilerplate. Also clean some description strings up a bit. Some other things could probably be cleaned up (replacing 'GPIO node' with 'GPIO controller' on controllers for consistency, for example), but I kept things close to the original to avoid accidentally messing up. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-11-19 08:39:11 +01:00
description: STM32 WB flash controller
drivers/flash: stm32wb: Add driver for stm32wb Add flash driver for stm32wb Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-03-27 16:52:37 +01:00
scripts: dts: Simplify and improve 'compatible' matching Instead of properties: compatible: constraint: "foo" , just have compatible: "foo" at the top level of the binding. For backwards compatibility, the old 'properties: compatible: ...' form is still accepted for now, and is treated the same as a single-element 'compatible:'. The old syntax was inspired by dt-schema (though it isn't dt-schema-compatible), which is in turn a thin wrapper around json-schema (the idea is to transform .dts files into YAML and then verify them). Maybe the idea was to gradually switch the syntax over to dt-schema and then be able to use unmodified dt-schema bindings, but dt-schema is really a different kind of tool (a completely standalone linter), and works very differently from our stuff (see schemas/dt-core.yaml in the dt-schema repo to get an idea of just how differently). Better to keep it simple. This commit also piggybacks some clarifications to the binding template re. '#cells:'. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-19 20:32:25 +02:00
compatible: "st,stm32wb-flash-controller"
dts/bindings: Convert bindings to new include syntax Convert from: inherits: !include spi-device.yaml to: include: spi-device.yaml Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-08-21 18:10:12 -05:00
include: flash-controller.yaml
drivers/flash: stm32wb: Add driver for stm32wb Add flash driver for stm32wb Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-03-27 16:52:37 +01:00
properties:
single-bank:
type: boolean
description: dual-bank mode not enabled (page erase 4096k)
dts: bindings: Have 'required: true/false' instead of 'category: ...' The 'category: required/optional' setting for properties is just a yes/no thing. Using a boolean makes it clearer, so have 'required: true/false' instead. Print a clear error when 'category:' is used: edtlib.EDTError: please put 'required: true' instead of 'category: required' in 'properties: foo: ...' in test-bindings/sub-node-parent.yaml - 'category' has been removed The old scripts in scripts/dts/ ignore this setting, and only print a warning if 'category: required' in an inherited binding is changed to 'category: optional'. Remove that code, since the new scripts already have the same check. The replacement was done with git ls-files 'dts/bindings/*.yaml' | xargs sed -i \ -e 's/category:\s*required/required: true/' \ -e 's/category:\s*optional/required: false/' dts/binding-template.yaml is updated as well. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-28 00:22:01 +02:00
required: false
drivers/flash: stm32wb: Add driver for stm32wb Add flash driver for stm32wb Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-03-27 16:52:37 +01:00
dual-bank:
type: boolean
description: dual-bank mode enabled (page erase 2048k)
dts: bindings: Have 'required: true/false' instead of 'category: ...' The 'category: required/optional' setting for properties is just a yes/no thing. Using a boolean makes it clearer, so have 'required: true/false' instead. Print a clear error when 'category:' is used: edtlib.EDTError: please put 'required: true' instead of 'category: required' in 'properties: foo: ...' in test-bindings/sub-node-parent.yaml - 'category' has been removed The old scripts in scripts/dts/ ignore this setting, and only print a warning if 'category: required' in an inherited binding is changed to 'category: optional'. Remove that code, since the new scripts already have the same check. The replacement was done with git ls-files 'dts/bindings/*.yaml' | xargs sed -i \ -e 's/category:\s*required/required: true/' \ -e 's/category:\s*optional/required: false/' dts/binding-template.yaml is updated as well. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-28 00:22:01 +02:00
required: false
Copy permalink