michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/drivers/lora/CMakeLists.txt

10 lines
402 B
Text
Raw Permalink Normal View History

drivers: lora: Add SX1276 LoRa Modem support Add support for Semtech SX1276 LoRa Modem. Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
2019-07-21 01:48:03 +05:30
# SPDX-License-Identifier: Apache-2.0
zephyr_library_named(loramac-node)
drivers: lora: Add a shell for LoRa testing Provide basic commands that are useful when testing a LoRa radio. Currently, the shell supports: > lora conf ... > lora send ... > lora recv ... > lora test_cw ... Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
2020-04-16 00:35:04 +01:00
zephyr_library_sources_ifdef(CONFIG_LORA_SHELL shell.c)
drivers: lora: Move board support to a separate file The implementation of the board support routines is shared between all LoRa drivers that use LoRaMAC-Node. Move them from the SX1276 implementation to a separate source file to facilitate reuse. Make this source file conditional on CONFIG_HAS_SEMTECH_RADIO_DRIVERS since it will be used by all LoRaMAC-Node-based drivers. Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
2020-05-04 18:23:59 +01:00
zephyr_library_sources_ifdef(CONFIG_HAS_SEMTECH_RADIO_DRIVERS hal_common.c)
drivers: lora: Factor out sx12xx common functionality LoRa radios supported by LoRaMAC-Node have a lot of common functionality. Zephyr's LoRa implementation for the SX1276 uses LoRaMAC-Nodes Radio HAL to implement API functionality like send and recv. The exact same functionality will be used by the SX126x driver. Facilitate sharing by moving that to a separate source file. Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
2020-05-05 09:16:32 +01:00
zephyr_library_sources_ifdef(CONFIG_HAS_SEMTECH_RADIO_DRIVERS sx12xx_common.c)
drivers: lora: Add SX1276 LoRa Modem support Add support for Semtech SX1276 LoRa Modem. Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
2019-07-21 01:48:03 +05:30
zephyr_library_sources_ifdef(CONFIG_LORA_SX1276 sx1276.c)
drivers: lora: Add SX126x LoRa radio support Add support for the SX126x series of LoRa radios using the LoRaMAC-Node HAL. This driver currently makes the following assumptions: * DIO1 is used as an interrupt line. * There is an RF switch selecting between the TX and RX ports and that switch is controlled by DIO2. * There is either no TCXO or the TCXO is controlled by DIO3. Specifically, the limitations above mean that modules that use GPIOs to control the RF switch are currently not supported. Support for such modules would need changes to the LoRaMAC-Node code. Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
2020-04-17 13:36:36 +01:00
zephyr_library_sources_ifdef(CONFIG_LORA_SX126X sx126x.c)
Copy permalink