michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/dts/bindings/interrupt-controller/atmel,sam0-eic.yaml

13 lines
184 B
YAML
Raw Permalink Normal View History

dts: bindings: Remove 'title:' and put all info. into 'description:' Add any useful information from 'title:' to the 'description:' strings (e.g. explanations of acronyms), and remove 'title:' as well as any copy-pasted "this binding gives a ..." boilerplate. Also clean some description strings up a bit. Some other things could probably be cleaned up (replacing 'GPIO node' with 'GPIO controller' on controllers for consistency, for example), but I kept things close to the original to avoid accidentally messing up. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-11-19 08:39:11 +01:00
description: Atmel SAM0 series External Interrupt Controller
drivers: gpio: sam0: Add interrupt support This adds interrupt support to the SAM0 GPIO driver. This is heavily inspired by @nzmichaelh work in #5715. The primary difference from that implementation is that here the External Interrupt Controller (EIC) is separated out into an interrupt controller driver that is less tightly coupled to the GPIO API. Instead it implements more of a conversion from the EIC's own odd multiplexing to a more traditional port and pin mask IRQ-like callback. Unfortunately, through the EIC on the SAMD2x are relatively well behaved in terms of pin to EIC line mappings, other chips that share the peripheral interface are not. So the EIC driver implements a per-line lookup to the pin and port pair using definitions extracted from the ASF headers. The EIC driver still makes some assumptions about how it will be used: mostly it assumes exactly one callback per port. This should be fine as the only intended user is the GPIO driver itself. This has been tested with some simple programs and with tests/drivers/gpio/gpio_basic_api on a SAMD21 breakout and an adafruit_trinket_m0 board. Signed-off-by: Derek Hageman <hageman@inthat.cloud>
2019-03-02 03:29:07 +01:00
scripts: dts: Simplify and improve 'compatible' matching Instead of properties: compatible: constraint: "foo" , just have compatible: "foo" at the top level of the binding. For backwards compatibility, the old 'properties: compatible: ...' form is still accepted for now, and is treated the same as a single-element 'compatible:'. The old syntax was inspired by dt-schema (though it isn't dt-schema-compatible), which is in turn a thin wrapper around json-schema (the idea is to transform .dts files into YAML and then verify them). Maybe the idea was to gradually switch the syntax over to dt-schema and then be able to use unmodified dt-schema bindings, but dt-schema is really a different kind of tool (a completely standalone linter), and works very differently from our stuff (see schemas/dt-core.yaml in the dt-schema repo to get an idea of just how differently). Better to keep it simple. This commit also piggybacks some clarifications to the binding template re. '#cells:'. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-19 20:32:25 +02:00
compatible: "atmel,sam0-eic"
dts/bindings: Convert bindings to new include syntax Convert from: inherits: !include spi-device.yaml to: include: spi-device.yaml Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-08-22 01:10:12 +02:00
include: base.yaml
dts/bindings: Move common properties into a base.yaml Move common properties like 'compatible', 'reg', 'reg-names', 'interrupts', 'interrupt-names', and 'label' into one common base.yaml that all the other yaml's can inherit from. This removes both duplication and inconsistent definition. The device specific yamls just need to say if a property is 'required' or not. NOTE: due to some generation conflicts we did not covert 'soc-nv-flash.yaml' to use base.yaml. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-06-07 18:12:49 +02:00
drivers: gpio: sam0: Add interrupt support This adds interrupt support to the SAM0 GPIO driver. This is heavily inspired by @nzmichaelh work in #5715. The primary difference from that implementation is that here the External Interrupt Controller (EIC) is separated out into an interrupt controller driver that is less tightly coupled to the GPIO API. Instead it implements more of a conversion from the EIC's own odd multiplexing to a more traditional port and pin mask IRQ-like callback. Unfortunately, through the EIC on the SAMD2x are relatively well behaved in terms of pin to EIC line mappings, other chips that share the peripheral interface are not. So the EIC driver implements a per-line lookup to the pin and port pair using definitions extracted from the ASF headers. The EIC driver still makes some assumptions about how it will be used: mostly it assumes exactly one callback per port. This should be fine as the only intended user is the GPIO driver itself. This has been tested with some simple programs and with tests/drivers/gpio/gpio_basic_api on a SAMD21 breakout and an adafruit_trinket_m0 board. Signed-off-by: Derek Hageman <hageman@inthat.cloud>
2019-03-02 03:29:07 +01:00
properties:
reg:
dts: bindings: Have 'required: true/false' instead of 'category: ...' The 'category: required/optional' setting for properties is just a yes/no thing. Using a boolean makes it clearer, so have 'required: true/false' instead. Print a clear error when 'category:' is used: edtlib.EDTError: please put 'required: true' instead of 'category: required' in 'properties: foo: ...' in test-bindings/sub-node-parent.yaml - 'category' has been removed The old scripts in scripts/dts/ ignore this setting, and only print a warning if 'category: required' in an inherited binding is changed to 'category: optional'. Remove that code, since the new scripts already have the same check. The replacement was done with git ls-files 'dts/bindings/*.yaml' | xargs sed -i \ -e 's/category:\s*required/required: true/' \ -e 's/category:\s*optional/required: false/' dts/binding-template.yaml is updated as well. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-28 00:22:01 +02:00
required: true
drivers: gpio: sam0: Add interrupt support This adds interrupt support to the SAM0 GPIO driver. This is heavily inspired by @nzmichaelh work in #5715. The primary difference from that implementation is that here the External Interrupt Controller (EIC) is separated out into an interrupt controller driver that is less tightly coupled to the GPIO API. Instead it implements more of a conversion from the EIC's own odd multiplexing to a more traditional port and pin mask IRQ-like callback. Unfortunately, through the EIC on the SAMD2x are relatively well behaved in terms of pin to EIC line mappings, other chips that share the peripheral interface are not. So the EIC driver implements a per-line lookup to the pin and port pair using definitions extracted from the ASF headers. The EIC driver still makes some assumptions about how it will be used: mostly it assumes exactly one callback per port. This should be fine as the only intended user is the GPIO driver itself. This has been tested with some simple programs and with tests/drivers/gpio/gpio_basic_api on a SAMD21 breakout and an adafruit_trinket_m0 board. Signed-off-by: Derek Hageman <hageman@inthat.cloud>
2019-03-02 03:29:07 +01:00
interrupts:
dts: bindings: Have 'required: true/false' instead of 'category: ...' The 'category: required/optional' setting for properties is just a yes/no thing. Using a boolean makes it clearer, so have 'required: true/false' instead. Print a clear error when 'category:' is used: edtlib.EDTError: please put 'required: true' instead of 'category: required' in 'properties: foo: ...' in test-bindings/sub-node-parent.yaml - 'category' has been removed The old scripts in scripts/dts/ ignore this setting, and only print a warning if 'category: required' in an inherited binding is changed to 'category: optional'. Remove that code, since the new scripts already have the same check. The replacement was done with git ls-files 'dts/bindings/*.yaml' | xargs sed -i \ -e 's/category:\s*required/required: true/' \ -e 's/category:\s*optional/required: false/' dts/binding-template.yaml is updated as well. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-28 00:22:01 +02:00
required: true
Copy permalink