michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/drivers/eeprom/Kconfig.eeprom_emu

15 lines
484 B
Plaintext
Raw Permalink Normal View History

drivers: eeprom: EEPROM emulation in flash memory This driver emulates a EEPROM device in flash. Reworked implementation with modified flash layout. The emulation represents the EEPROM in flash as a region that is a direct map of the eeprom data followed by a region where changes to the eeprom data is stored. Changes are written as address-data combinations. The size of such a combination is determined by the flash write block size and the size of the eeprom (required address space), with a minimum of 4 byte. The eeprom page needs to be a multiple of the flash page. Multiple eeprom pages is also so supported and increases the number of writes that can be performed. The eeprom size, pagesize and the flash partition used for the eeprom are defined in the dts. The flash partition should allow at least two eeprom pages. For fast read access a rambuffer can be enabled for the eeprom (by setting the option rambuf in the dts). Signed-off-by: Laczen JMS <laczenjms@gmail.com>
2020-12-14 14:47:06 +01:00
# Copyright (c) 2020 Laczen
# SPDX-License-Identifier: Apache-2.0
config EEPROM_EMULATOR
bool "Emulated EEPROM driver"
drivers: eeprom: Update drivers to use devicetree Kconfig symbol Update EEPROM drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol to expose the driver and enable it by default based on devicetree. Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2022-07-21 11:07:28 +02:00
default y
depends on DT_HAS_ZEPHYR_EMU_EEPROM_ENABLED
drivers: eeprom: EEPROM emulation in flash memory This driver emulates a EEPROM device in flash. Reworked implementation with modified flash layout. The emulation represents the EEPROM in flash as a region that is a direct map of the eeprom data followed by a region where changes to the eeprom data is stored. Changes are written as address-data combinations. The size of such a combination is determined by the flash write block size and the size of the eeprom (required address space), with a minimum of 4 byte. The eeprom page needs to be a multiple of the flash page. Multiple eeprom pages is also so supported and increases the number of writes that can be performed. The eeprom size, pagesize and the flash partition used for the eeprom are defined in the dts. The flash partition should allow at least two eeprom pages. For fast read access a rambuffer can be enabled for the eeprom (by setting the option rambuf in the dts). Signed-off-by: Laczen JMS <laczenjms@gmail.com>
2020-12-14 14:47:06 +01:00
select FLASH
help
Enable emulated (on flash) EEPROM support. This mimics an external
EEPROM on a flash partition. The number of writes that can be
performed to the EEPROM is maximized by using a flash area that is
larger than the EEPROM area and by storing only changes to the EEPROM
data.
Copy permalink