michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/dts/bindings/sensor/st,stts751-i2c.yaml

20 lines
514 B
YAML
Raw Permalink Normal View History

driver/sensor: add STTS751 temperature sensor Add support to STM STTS751 temperature sensor. Signed-off-by: Armando Visconti <armando.visconti@st.com>
2019-07-16 08:40:16 +02:00
# Copyright (c) 2019 STMicroelectronics
# SPDX-License-Identifier: Apache-2.0
dts: bindings: Preserve newlines in descriptions With https://github.com/zephyrproject-rtos/zephyr/pull/20185, multi-line descriptions will be formatted nicely, but using '>' breaks it, because it removes internal newlines (including between paragraphs). See https://yaml-multiline.info/. Replace 'description: >' with 'description: |' to encourage '|'. That'll prevent '>' from getting copied around and messing up long descriptions. This will lead to some extra newlines in the output, but it's fine. Line-wrapping messes up any manual formatting. The replacement was done with $ git ls-files 'dts/bindings/*.yaml' | \ xargs sed -i 's/description:\s*>/description: |/' Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-10-28 17:34:12 +01:00
description: |
dts: bindings: Remove 'title:' and put all info. into 'description:' Add any useful information from 'title:' to the 'description:' strings (e.g. explanations of acronyms), and remove 'title:' as well as any copy-pasted "this binding gives a ..." boilerplate. Also clean some description strings up a bit. Some other things could probably be cleaned up (replacing 'GPIO node' with 'GPIO controller' on controllers for consistency, for example), but I kept things close to the original to avoid accidentally messing up. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-11-19 08:39:11 +01:00
STMicroelectronics STTS751 temperature sensor connected to I2C bus
driver/sensor: add STTS751 temperature sensor Add support to STM STTS751 temperature sensor. Signed-off-by: Armando Visconti <armando.visconti@st.com>
2019-07-16 08:40:16 +02:00
scripts: dts: Simplify and improve 'compatible' matching Instead of properties: compatible: constraint: "foo" , just have compatible: "foo" at the top level of the binding. For backwards compatibility, the old 'properties: compatible: ...' form is still accepted for now, and is treated the same as a single-element 'compatible:'. The old syntax was inspired by dt-schema (though it isn't dt-schema-compatible), which is in turn a thin wrapper around json-schema (the idea is to transform .dts files into YAML and then verify them). Maybe the idea was to gradually switch the syntax over to dt-schema and then be able to use unmodified dt-schema bindings, but dt-schema is really a different kind of tool (a completely standalone linter), and works very differently from our stuff (see schemas/dt-core.yaml in the dt-schema repo to get an idea of just how differently). Better to keep it simple. This commit also piggybacks some clarifications to the binding template re. '#cells:'. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-19 20:32:25 +02:00
compatible: "st,stts751"
dts/bindings: Convert bindings to new include syntax Convert from: inherits: !include spi-device.yaml to: include: spi-device.yaml Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-08-22 01:10:12 +02:00
include: i2c-device.yaml
driver/sensor: add STTS751 temperature sensor Add support to STM STTS751 temperature sensor. Signed-off-by: Armando Visconti <armando.visconti@st.com>
2019-07-16 08:40:16 +02:00
properties:
drdy-gpios:
dts/bindings: Convert compound to phandle-array type Convert type from compound to phandle-array for various bindings that have properties like like <FOO>-gpios, pwms, clocks, interrupt-extended, etc. that are phandle-array's. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-08-14 15:58:07 +02:00
type: phandle-array
dts: bindings: Have 'required: true/false' instead of 'category: ...' The 'category: required/optional' setting for properties is just a yes/no thing. Using a boolean makes it clearer, so have 'required: true/false' instead. Print a clear error when 'category:' is used: edtlib.EDTError: please put 'required: true' instead of 'category: required' in 'properties: foo: ...' in test-bindings/sub-node-parent.yaml - 'category' has been removed The old scripts in scripts/dts/ ignore this setting, and only print a warning if 'category: required' in an inherited binding is changed to 'category: optional'. Remove that code, since the new scripts already have the same check. The replacement was done with git ls-files 'dts/bindings/*.yaml' | xargs sed -i \ -e 's/category:\s*required/required: true/' \ -e 's/category:\s*optional/required: false/' dts/binding-template.yaml is updated as well. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-28 00:22:01 +02:00
required: false
driver/sensor: add STTS751 temperature sensor Add support to STM STTS751 temperature sensor. Signed-off-by: Armando Visconti <armando.visconti@st.com>
2019-07-16 08:40:16 +02:00
description: DRDY pin
driver/sensor: stts751: update to use new GPIO API Get rid of all the deprecated functions and definitions replacing them with the new ones. Signed-off-by: Armando Visconti <armando.visconti@st.com>
2020-01-10 13:32:08 +01:00
This pin defaults to active high when produced by the sensor.
The property value should ensure the flags properly describe
the signal that is presented to the driver.
Copy permalink