michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/dts/bindings/i2c/nxp,kinetis-i2c.yaml

19 lines
299 B
YAML
Raw Permalink Normal View History

dts/i2c: Fixing copyright headers Some yaml files were missing there copyright header. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2018-02-28 10:37:41 +01:00
# Copyright (c) 2017 Linaro Limited
# SPDX-License-Identifier: Apache-2.0
yaml: Remove redundant document separators YAML document separators are needed e.g. when doing $ cat doc1.yaml doc2.yaml | <parser> For the bindings, we never parse concatenated documents. Assume we don't for any other .yaml files either. Having document separators in e.g. base.yaml makes !include a bit confusing, since the !included files are merged and not separate documents (the merging is done in Python code though, so it makes no difference for behavior). The replacement was done with $ git ls-files '*.yaml' | \ xargs sed -i -e '${/\s*\.\.\.\s*/d;}' -e 's/^\s*---\s*$//' First pattern removes ... at the end of files, second pattern clears a line with a lone --- on it. Some redundant blank lines at the end of files were cleared with $ git ls-files '*.yaml' | xargs sed -i '${/^\s*$/d}' This is more about making sure people can understand why every part of a binding is there than about removing some text. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-06-19 00:03:49 +02:00
dts: bindings: Remove 'title:' and put all info. into 'description:' Add any useful information from 'title:' to the 'description:' strings (e.g. explanations of acronyms), and remove 'title:' as well as any copy-pasted "this binding gives a ..." boilerplate. Also clean some description strings up a bit. Some other things could probably be cleaned up (replacing 'GPIO node' with 'GPIO controller' on controllers for consistency, for example), but I kept things close to the original to avoid accidentally messing up. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-11-19 08:39:11 +01:00
description: Kinetis I2C node
i2c: mcux: Convert to supporting device tree Update the MCUX I2C driver and related platforms to get their I2C information from the device tree. We also updated a few of the sensor drivers found on the FRDM & Hexiwear boards to get their I2C bus name from the device tree instead of directly from Kconfig. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-07-11 17:38:09 +02:00
scripts: dts: Simplify and improve 'compatible' matching Instead of properties: compatible: constraint: "foo" , just have compatible: "foo" at the top level of the binding. For backwards compatibility, the old 'properties: compatible: ...' form is still accepted for now, and is treated the same as a single-element 'compatible:'. The old syntax was inspired by dt-schema (though it isn't dt-schema-compatible), which is in turn a thin wrapper around json-schema (the idea is to transform .dts files into YAML and then verify them). Maybe the idea was to gradually switch the syntax over to dt-schema and then be able to use unmodified dt-schema bindings, but dt-schema is really a different kind of tool (a completely standalone linter), and works very differently from our stuff (see schemas/dt-core.yaml in the dt-schema repo to get an idea of just how differently). Better to keep it simple. This commit also piggybacks some clarifications to the binding template re. '#cells:'. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-19 20:32:25 +02:00
compatible: "nxp,kinetis-i2c"
drivers: i2c: enable pinctrl for kinetis i2c Enable pinctrl for kinetis i2c mcux driver Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
2022-03-07 17:59:15 +01:00
include: ["i2c-controller.yaml", "pinctrl-device.yaml"]
i2c: mcux: Convert to supporting device tree Update the MCUX I2C driver and related platforms to get their I2C information from the device tree. We also updated a few of the sensor drivers found on the FRDM & Hexiwear boards to get their I2C bus name from the device tree instead of directly from Kconfig. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-07-11 17:38:09 +02:00
properties:
yamllint: indentation: fix dts/bindings/ Fix the YAML files indentation for files in dts/bindings/. Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
2023-01-03 20:21:25 +01:00
reg:
required: true
i2c: mcux: Convert to supporting device tree Update the MCUX I2C driver and related platforms to get their I2C information from the device tree. We also updated a few of the sensor drivers found on the FRDM & Hexiwear boards to get their I2C bus name from the device tree instead of directly from Kconfig. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-07-11 17:38:09 +02:00
yamllint: indentation: fix dts/bindings/ Fix the YAML files indentation for files in dts/bindings/. Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
2023-01-03 20:21:25 +01:00
interrupts:
required: true
dts: bindings: nxp: Add pinctrl-0 as a required property Add pinctrl-0 as being required on NXP Kinetis DTS bindings for I2C, FTM, UART, and DSPI related devices. Other devices like ethernet and CAN are utilized outside of just the Kinetis family and thus we can not require pinctrl-0 property for them at this time. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2021-05-03 22:04:08 +02:00
yamllint: indentation: fix dts/bindings/ Fix the YAML files indentation for files in dts/bindings/. Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
2023-01-03 20:21:25 +01:00
pinctrl-0:
required: true
Copy permalink