zephyr/boards/arm/olimex_stm32_p405/olimex_stm32_p405.yaml

identifier: olimex_stm32_p405
name: OLIMEX-STM32-P405
type: mcu
arch: arm
toolchain:
  - zephyr
  - gnuarmemb
  - xtools
ram: 128
flash: 1024
supported:
  - counter
  - can
boards: arm: olimex_stm32_p405: Initial Olimex STM32-P405 BSP - board name olimex_stm32_p405 - CPU STM32F405RGT6 Cortex M4 - LED/BUTTON support - Console on USART2 with 8n1 115200 baud Signed-off-by: Erwin Rol <erwin@erwinrol.com> 2017-08-04 17:20:26 +02:00			`identifier: olimex_stm32_p405`
boards: stm32: Fix boards names in yaml and/or doc files For auto doc generation purpose, get name value of boards' yaml files in sync with name provided as board name in .rst file Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org> 2020-05-04 17:05:27 +02:00			`name: OLIMEX-STM32-P405`
boards: arm: olimex_stm32_p405: Initial Olimex STM32-P405 BSP - board name olimex_stm32_p405 - CPU STM32F405RGT6 Cortex M4 - LED/BUTTON support - Console on USART2 with 8n1 115200 baud Signed-off-by: Erwin Rol <erwin@erwinrol.com> 2017-08-04 17:20:26 +02:00			`type: mcu`
			`arch: arm`
			`toolchain:`
			`- zephyr`
build: Replace GCC ARM Embedded with GNU Arm Embedded The old GCC ARM Embedded website on launchpad (https://launchpad.net/gcc-arm-embedded) has been superseeded by the new GNU Arm Embedded one (https://developer.arm.com/open-source/gnu-toolchain/gnu-rm). This also means a change of name from "GCC" to "GNU". Reflect this in the enviroment variables so that the proper term is used henceforth. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> 2018-08-03 17:11:23 +02:00			`- gnuarmemb`
boards: arm: Add xtools as a supported toolchain Update all ARM boards to have xtools as a supported toolchain. Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2019-01-09 17:25:16 +01:00			`- xtools`
boards: stm32: Enable CCM and update yaml Following fix SRAM size to take into account CCM, enable CCM and update yaml files in boards including fixed soc dtsi definitions. Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org> 2019-03-25 11:40:24 +01:00			`ram: 128`
			`flash: 1024`
boards/arm: Enable RTC on STM32F4 based boards Enable RTC on STM32F4 based boards. Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2018-06-20 18:51:42 +02:00			`supported:`
boards: Update yaml for boards supporting rtc/counter (3/3) Few boards supporting RTC were missing rtc as supported rtc feature in yaml files. Fix this. Add counter to all boards supporting rtc as RTC IP now support both rtc and counter API. Change split in 3 parts in order to lower CI load and get shippable happy. Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org> 2019-02-07 09:00:12 +01:00			`- counter`
boards: arm: olimex_stm32_p405: Add CAN1 support Add support for CAN on pins PB8 (CAN1_RX) and PB9 (CAN1_TX). Signed-off-by: Erwin Rol <erwin@erwinrol.com> 2019-01-19 11:41:22 +01:00			`- can`