21 lines
1.2 KiB
Markdown
21 lines
1.2 KiB
Markdown
|
---
|
||
|
|
title: No luck on flying
|
||
|
|
author: michaelh
|
||
|
|
type: post
|
||
|
|
date: 2015-08-30T11:09:30+00:00
|
||
|
|
url: /2015/08/no-luck-on-flying/
|
||
|
|
categories:
|
||
|
|
- Flying
|
||
|
|
- nppilot
|
||
|
|
|
||
|
|
---
|
||
|
|
Looks like the plane is too heavy. It took off OK on the first try, but I couldn’t get it to lift on five goes past that. The first flight was probably due to the little bit of extra voltage a freshly charged battery has.
|
||
|
|
|
||
|
|
I did some measurements and the plane with autopilot is 1130 g, which is 255 g / 30 % higher than the design flying weight of 875 g. 110 g of that is in the MDF plate and 50 g is in my usual higher capacity batteries.
|
||
|
|
|
||
|
|
Next step is to redo the plate in polystyrene. I’m tempted to follow Z-8’s [instructions][1] and change the prop to a APC 10×7 E and upgrade the motor to a [Super Tigre .10][2]. The Super Tigre has a higher constant power (320 W vs 210 W), is a drop in replacement, and as a bonus saves 50 g.
|
||
|
|
|
||
|
|
Edit: annnd I crashed it 🙂 I fitted a 10×7 prop and new receiver and got the elevator direction wrong. The good news is the 10×7 makes the plane leap away. The bad news is it lept away into the ground…
|
||
|
|
|
||
|
|
[1]: http://www.rcgroups.com/forums/showthread.php?t=1224971
|
||
|
|
[2]: http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXXGY4&P=8
|