esphome:
  name: ${device_id}
  name_add_mac_suffix: true
  friendly_name: "${device_name}"
  project:
    name: "${project_name}"
    version: "${project_version}"

esp32:
  variant: esp32c3
  framework:
    type: esp-idf

api:
  encryption:
    key: !secret api_key

output:
  - id: blue_led_out
    platform: gpio
    pin: 7
  - id: green_led_out
    platform: gpio
    pin:
      number: 8
      inverted: true
  - id: yellow_led_out
    platform: gpio
    pin:
      number: 9
      inverted: true

light:
  - platform: binary
    id: blue_led
    name: "Blue LED"
    output: blue_led_out
    internal: True
  - platform: binary
    id: green_led
    name: "Green LED"
    output: green_led_out
    internal: True
  - platform: binary
    id: yellow_led
    name: "Yellow LED"
    output: yellow_led_out
    internal: True

canbus:
  - platform: esp32_can
    id: can0
    tx_pin: 0
    rx_pin: 3
    bit_rate: 500kbps
    can_id: 0

switch:
  - platform: gpio
    id: can_enable
    name: "CAN interface enable"
    pin:
      number: 6
      inverted: true
    restore_mode: ALWAYS_ON
    internal: True
    
sensor:
  - platform: adc
    id: starter_battery
    name: "Starter battery voltage"
    pin: 4
    attenuation: 11db
    filters:
      - multiply: 7.25 # 116 / 16
      - sliding_window_moving_average:
          window_size: 5
          send_every: 5
          send_first_at: 1
    update_interval: 5s
    unit_of_measurement: V
    accuracy_decimals: 1
    device_class: voltage
    state_class: measurement