base.yaml

@@ -37,9 +37,6 @@ wifi:
   # Connect to the first AP found.
   fast_connect: true
 
-network:
-    enable_ipv6: true
-
 time:
   - platform: homeassistant
     id: homeassistant_time

pm6006.yaml

@@ -32,89 +32,87 @@ remote_transmitter:
     number: GPIO13
   carrier_duty_percent: 100%
 
-packages:
-  pm6006:
-    switch:
-      - platform: template
-        name: "PM6006 power"
-        icon: "mdi:power"
-        lambda: |-
-          if (id(pm6006_power_sense).state) {
-            return true;
-          } else {
-            return false;
-          }
-        turn_on_action:
-          if:
-            condition:
-              binary_sensor.is_off: pm6006_power_sense
-            then:
-              - remote_transmitter.transmit_rc5:
-                  address: 0x10
-                  command: 0x0C
-                  # Needs to be sent twice to reliably wake up.
-                  repeat: 2
-              - delay: 500ms
-              - if:
-                  # However, sometimes it turns on then off. Turn on again if so.
-                  condition:
-                    binary_sensor.is_off: pm6006_power_sense
-                  then:
-                    - remote_transmitter.transmit_rc5:
-                        address: 0x10
-                        command: 0x0C
-                        repeat: 2
-        turn_off_action:
-          if:
-            condition:
-              binary_sensor.is_on: pm6006_power_sense
-            then:
-              - remote_transmitter.transmit_rc5:
-                  address: 0x10
-                  command: 0x0C
-                  repeat: 2
-              - delay: 500ms
-              - if:
-                  # However, sometimes it doesn't turn off.
-                  condition:
-                    binary_sensor.is_on: pm6006_power_sense
-                  then:
-                    - remote_transmitter.transmit_rc5:
-                        address: 0x10
-                        command: 0x0C
-                        repeat: 2
-      - platform: template
-        name: "PM6006 volume up"
-        icon: "mdi:volume-plus"
-        turn_on_action:
-          remote_transmitter.transmit_rc5:
-            address: 0x10
-            command: 16
-        turn_off_action:
-          remote_transmitter.transmit_rc5:
-            address: 0x10
-            command: 16
-      - platform: template
-        name: "PM6006 volume down"
-        icon: "mdi:volume-minus"
-        turn_on_action:
-          remote_transmitter.transmit_rc5:
-            address: 0x10
-            command: 17
-        turn_off_action:
-          remote_transmitter.transmit_rc5:
-            address: 0x10
-            command: 17
-      - platform: template
-        name: "PM6006 mute"
-        icon: "mdi:volume-mute"
-        turn_on_action:
-          remote_transmitter.transmit_rc5:
-            address: 0x10
-            command: 13
-        turn_off_action:
-          remote_transmitter.transmit_rc5:
-            address: 0x10
-            command: 13
+switch:
+  - platform: template
+    name: "PM6006 power"
+    icon: "mdi:power"
+    lambda: |-
+      if (id(pm6006_power_sense).state) {
+        return true;
+      } else {
+        return false;
+      }
+    turn_on_action:
+      if:
+        condition:
+          binary_sensor.is_off: pm6006_power_sense
+        then:
+          - remote_transmitter.transmit_rc5:
+              address: 0x10
+              command: 0x0C
+              # Needs to be sent twice to reliably wake up.
+              repeat: 2
+          - delay: 500ms
+          - if:
+              # However, sometimes it turns on then off. Turn on again if so.
+              condition:
+                binary_sensor.is_off: pm6006_power_sense
+              then:
+                - remote_transmitter.transmit_rc5:
+                    address: 0x10
+                    command: 0x0C
+                    repeat: 2
+    turn_off_action:
+      if:
+        condition:
+          binary_sensor.is_on: pm6006_power_sense
+        then:
+          - remote_transmitter.transmit_rc5:
+              address: 0x10
+              command: 0x0C
+              repeat: 2
+          - delay: 500ms
+          - if:
+              # However, sometimes it doesn't turn off.
+              condition:
+                binary_sensor.is_on: pm6006_power_sense
+              then:
+                - remote_transmitter.transmit_rc5:
+                    address: 0x10
+                    command: 0x0C
+                    repeat: 2
+  - platform: template
+    name: "PM6006 volume up"
+    icon: "mdi:volume-plus"
+    turn_on_action:
+      remote_transmitter.transmit_rc5:
+        address: 0x10
+        command: 16
+    turn_off_action:
+      remote_transmitter.transmit_rc5:
+        address: 0x10
+        command: 16
+  - platform: template
+    name: "PM6006 volume down"
+    icon: "mdi:volume-minus"
+    turn_on_action:
+      remote_transmitter.transmit_rc5:
+        address: 0x10
+        command: 17
+    turn_off_action:
+      remote_transmitter.transmit_rc5:
+        address: 0x10
+        command: 17
+  - platform: template
+    name: "PM6006 mute"
+    icon: "mdi:volume-mute"
+    turn_on_action:
+      remote_transmitter.transmit_rc5:
+        address: 0x10
+        command: 13
+    turn_off_action:
+      remote_transmitter.transmit_rc5:
+        address: 0x10
+        command: 13
 
 <<: !include base.yaml