This allows boards to override the logic level of a pressed
button. All Maple boards have a pressed button read HIGH, but if the
opposite convention is used, isButtonPressed() will infinite loop.
Make isButtonPressed() respect this setting.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
Only OUTPUT mode is tested; any other modes might work, but no
guarantees.
Bring back:
- wirish/wirish_digital.cpp
- wirish/cxxabi-compat.cpp
- wirish/wirish_time.cpp
Add new:
- wirish/stm32f1/wirish_digital.cpp
- wirish/stm32f2/wirish_digital.cpp
Move pinMode() from wirish/wirish_digital.cpp into the file by the
same basename in wirish/stm32f1. This implementation is tied to
F1. Add an F2 implementation in wirish/stm32f2/wirish_digital.cpp.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
Move libmaple/*.h to (new) libmaple/include/libmaple/. The new
accepted way to include a libmaple header foo.h is with:
#include <libmaple/foo.h>
This is more polite in terms of the include namespace. It also allows
us to e.g. implement the Arduino SPI library at all (which has header
SPI.h; providing it was previously impossible on case-insensitive
filesystems due to libmaple's spi.h).
Similarly for Wirish.
The old include style (#include "header.h") is now deprecated.
libmaple/*.h:
- Change include guard #defines from _FOO_H_ to _LIBMAPLE_FOO_H_.
- Add license headers where they're missing
- Add conditional extern "C" { ... } blocks where they're missing
(they aren't always necessary, but we might was well do it against
the future, while we're at it.).
- Change includes from #include "foo.h" to #include <libmaple/foo.h>.
- Move includes after extern "C".
- Remove extra trailing newlines
Note that this doesn't include the headers under libmaple/usb/ or
libmaple/usb/usb_lib. These will get fixed later.
libmaple/*.c:
- Change includes from #include "foo.h" to #include <libmaple/foo.h>.
Makefile:
- Add I$(LIBMAPLE_PATH)/include/libmaple to GLOBAL_FLAGS. This allows
for users (including Wirish) to migrate their code, but should go
away ASAP, since it slows down compilation.
Wirish:
- Move wirish/**/*.h to (new) wirish/include/wirish/. This ignores
the USB headers, which, as usual, are getting handled after
everything else.
- Similarly generify wirish/boards/ structure. For each supported
board "foo", move wirish/boards/foo.h and wirish/boards/foo.cpp to
wirish/boards/foo/include/board/board.h and
wirish/boards/foo/board.cpp, respectively. Also remove the #ifdef
hacks around the .cpp files.
- wirish/rules.mk: put wirish/boards/foo/include in the include path
(and add wirish/boards/foo/board.cpp to the list of sources to be
compiled). This allows saying:
#include <board/board.h>
instead of the hack currently in place. We can allow the user to
override this setting later to make adding custom board definitions
easier.
- Disable -Werror in libmaple/rules.mk, as the current USB warnings
don't let the olimex_stm32_h103 board compile. We can re-enable
-Werror once we've moved the board-specific bits out of libmaple
proper.
libraries, examples:
- Update includes accordingly.
- Miscellaneous cosmetic fixups.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
Clean up various core files' includes to fit this pattern:
- Header files include what they use.
- CPP files include their header first
- Include order is libmaple proper headers, then wirish
headers (modulo CPP rule above).
wirish.h: Move HIGH and LOW to io.h, and the boolean and byte typedefs
into wirish_types.h. These don't belong in wirish.h.
Add include guards to wirish_debug.h. Oops.
wirish_digital.cpp: Use standard bool instead of "boolean".
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
Go through overlong source code lines and convert as many of them as
appropriate to be 80-column clean. This mostly affects license
headers. Overlong lines are determined by running following from the
libmaple base directory:
$ ack-grep --nocolor --nogroup --cpp --cc --ignore-dir=usb -- '.{80}'
Note that this excludes libmaple's usb subdirectory, which is still
full of ST code that doesn't follow the libmaple source code
guidelines.
Contents of ~/.ackrc (these won't matter, but are included for
completeness):
--ignore-dir=docs
--ignore-dir=build
--type-set
ld=.ld
--type-set
rst=.rst
--type-set
txt=.txt
--type-set
mk=.mk
Various board-specific #defines and arrays of pins added.
For the changelog (some of this information predates this commit):
* wirish/boards.h now declares the following arrays of pin numbers:
* boardPWMPins - PWM-capable pins
* boardADCPins - ADC-capable pins
* boardUsedPins - pins already in use, e.g. BOARD_BUTTON_PIN
It also declares a bool boardUsesPin(uint8 pin) function for
convenient testing of whether a pin is in use.
* wirish/boards/*.h now define:
* BOARD_USART1_TX_PIN
* BOARD_USART1_RX_PIN
* BOARD_USART2_TX_PIN
* BOARD_USART2_RX_PIN
* BOARD_USART3_TX_PIN
* BOARD_USART3_RX_PIN
* BOARD_NR_GPIO_PINS (renamed from NR_GPIO_PINS)
* BOARD_NR_USARTS (renamed from NR_USARTS)
* BOARD_NR_PWM_PINS
* BOARD_NR_ADC_PINS
* BOARD_NR_USED_PINS
* wirish/boards/maple_native.h now defines:
* BOARD_UART4_TX_PIN
* BOARD_UART4_RX_PIN
* BOARD_UART5_TX_PIN
* BOARD_UART5_RX_PIN
(Unfortunately, wirish/boards/maple_RET6.h cannot, since at least
one of the UART4/UART5 pins are used already; this will require layout
changes for a wide-release Maple form factor RET6 board).
* wirish/boards/*.cpp all include the corresponding array definitions.
They all live in flash by default, thanks to the new __FLASH__ macro
in wirish/wirish_types.h, which is a synonym for the existing __attr_flash
#define in libmaple/libmaple_types.h.
The documentation was updated to include this information. It also
gained various FIXME/TODO comments related to its generalization
across boards.
The quality assurance-related examples (examples/qa-slave-shield.cpp
and examples/test-session.cpp) now make heavy use of board-specific
values to ensure portability.
Added an adc_dev to struct stm32_pin_info. This was necessary to add
support for the channels on the Native which are only connected to
ADC3, but it does add a bunch of NULLs to the PIN_MAPs.
I don't think any other peripherals need representation on a per-pin
basis. Each peripheral library will be responsible for keeping track
of related GPIO ports and bits, and we can throw #defines in to
boards/*.h for other things (e.g. BOARD_SPI1_MISO_PIN).
Fleshed out the ADC refactor and brought it more in keeping with the
new design as it evolves.
A couple of other tweaks. Notably: waitForButtonPress() now takes a
default argument meaning "wait forever".
Removed Maple-specific documentation from core functions in io.h; this
information will need to go into the individual board docs files.
/wirish/boards/ contains xxx.h and xxx.cpp (for xxx=maple,
maple_native, maple_mini, maple_RET6). The headers contain the
board-specific #defines that used to live in boards.h (except
BOARD_INIT, which was removed). The CPP files contain the PIN_MAP
definitions that used to live in boards.cpp, and a proper boardInit()
function to replace the old BOARD_INIT macro. This will make it
easier to add new boards in the future.
struct PinMapping was renamed struct stm32_pin_info, and was moved
into a new wirish_types.h. Its external interrupt field was moved
into struct gpio_dev, which saves memory by storing an afio_exti_port
per port, rather than one per pin. Also rearranged the stm32_pin_info
fields to improve packing. Maple's PIN_MAP is now down to below 500
bytes.
Basic PWM works. Had some problems in testing that might be due to
USART bugs.
HardwareTimer has been removed from the build for now; I will
re-implement it in terms of the new libmaple API, but consider it
deprecated. Let's come up with something better.
Servo is implemented in terms of HardwareTimer, so it also has been
temporarily removed from the build.
pwmWrite() likely got a little bit less inefficient due to
indirection, but the PIN_MAPs shrank by a pointer per PinMapping.
