juju/cleanflight
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
2737 commits 13 branches 0 tags 45 MiB
Commit graph

2737 commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
timecop@gmail.com 6bbc8fdb22 fix accZ/shake detection when copter upside down. oops. 
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@432 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-10-12 06:57:31 +00:00
timecop@gmail.com a9b094dca6 fixing buzzer related compilation errors on OLIMEXINO target [by Dominic Clifton] 
moved alignSensors from drv_system to utils
updating uvproj to keil5

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@431 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-10-12 02:04:08 +00:00
Dominic Clifton ed3a3e683c Softserial can now be enabled/disabled via the SOFTSERIAL feature switch in the command line. Softserial baud rate can be set via softserial_baudrate setting. Added input & output inversion support, use softserial_inverted setting. 2013-10-12 02:30:47 +01:00
Dominic Clifton dd0a962682 fixing buzzer related compilation errors on OLIMEXINO target. 2013-10-11 22:17:49 +01:00
Dominic Clifton d8e9282f04 Merge remote-tracking branch 'multiwii/upstream' 
Conflicts:
	src/drv_system.c
	src/main.c
 2013-10-11 21:39:40 +01:00
timecop@gmail.com 3bb1063001 fixed buzzer on rev5 boards; 
added experimental gyro-based headfree boxes

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@429 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-10-04 14:36:34 +00:00
timecop@gmail.com 800ce6bdf7 fixed a fuckup with yaw_rate that was caused by more 8bit leftover garbage 
fixed althold vel/constrain typo thx Marcin
flight-tested this build on my shitcopter, CAREFUL flight testing may commence.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@428 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-10-04 01:51:31 +00:00
timecop@gmail.com 891bce4e19 reset heading to zero when calibrating gyro w/stick combo on hardware without mag 
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@427 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-10-02 02:29:52 +00:00
timecop@gmail.com 3744f36895 calculate heading using gyro-only on boards without mag - idea by Cesco 
added constants for gyro/acc/baro cal and fixed calibration to add /2
warning cleanup in drv_serial.c

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@426 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-10-02 02:18:14 +00:00
timecop@gmail.com 5332b78200 simplify serialrx by Cesco 
fix bug in softserial with digitalIn usage (todo rewrite this properly)

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@425 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-10-02 00:10:40 +00:00
Dominic Clifton 767babed1d Merge remote-tracking branch 'multiwii/upstream' 
Conflicts:
	src/board.h
	src/drv_softserial.c
	src/drv_uart.c
	src/drv_uart.h
	src/main.c
 2013-10-01 22:31:38 +01:00
Dominic Clifton 750fea4b80 Merge branch 'softserial' 
Conflicts:
	src/board.h
	src/drv_pwm.c
	src/drv_softserial.c
	src/drv_softserial.h
	src/drv_system.c
	src/drv_timer.c
	src/drv_uart.c
	src/drv_uart.h
	src/main.c
	src/sensors.c
 2013-10-01 22:16:25 +01:00
timecop@gmail.com 8003d06049 Totally rework software serial to provide tx at the same time as rx using only one timer. 
First cut at polymorphic serial port implementation.  Split serialPort_t into uartPort_t and serialPort_t.  Calls to uartWrite() can now be replaced with calls to serialWrite().

Replacing calls to serialWriteByte(softSerial_t*, char) with calls to serialWrite(serialPort_t*, char).  This completes the proof of concept for polymorphic serial port implementations (uartPort and softSerialPort).

Renaming isSerialAvailable to uartTotalBytesWaiting.  Renaming serialAvailable to softSerialTotalBytesWaiting.  Adding serialTotalBytesWaiting to serial API and updating calls to the former methods to use the serial API.

Renaming serialRead to softSerialRead.  Adding serialRead to serial API and updating calls to uartRead and softSerialRead to use the serial API.  Renamed uartPrint to serialPrint which now works on any serialPort implementation.

Replacing calls to isUartTransmitEmpty with isSoftSerialTransmitBufferEmpty.  Replacing remaing calls to uartWrite with serialWrite.  Adding isSoftSerialTransmitBufferEmpty to the serial API.  Adding serialSet/GetBaudRate to the serial API.  Since softSerial does not implement serialSetBaudRate some GPS serial initialisation code has been updated.

At this point it is probably possible to switch around all the ports and use a software serial implementation if desired.

By Dominic Clifton / https://github.com/hydra/baseflight/

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@423 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61

Conflicts:

	src/drv_serial.c
	src/drv_serial.h
	src/main.c
 2013-10-01 22:05:10 +01:00
timecop@gmail.com fa810e907a some whitespace and formatting cleanups on the last commit. 
also changed GPIO_GetInputDataBit to use proper digitalIn() api

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@424 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-10-01 00:25:56 +00:00
timecop@gmail.com 28d5927836 Totally rework software serial to provide tx at the same time as rx using only one timer. 
First cut at polymorphic serial port implementation.  Split serialPort_t into uartPort_t and serialPort_t.  Calls to uartWrite() can now be replaced with calls to serialWrite().

Replacing calls to serialWriteByte(softSerial_t*, char) with calls to serialWrite(serialPort_t*, char).  This completes the proof of concept for polymorphic serial port implementations (uartPort and softSerialPort).

Renaming isSerialAvailable to uartTotalBytesWaiting.  Renaming serialAvailable to softSerialTotalBytesWaiting.  Adding serialTotalBytesWaiting to serial API and updating calls to the former methods to use the serial API.

Renaming serialRead to softSerialRead.  Adding serialRead to serial API and updating calls to uartRead and softSerialRead to use the serial API.  Renamed uartPrint to serialPrint which now works on any serialPort implementation.

Replacing calls to isUartTransmitEmpty with isSoftSerialTransmitBufferEmpty.  Replacing remaing calls to uartWrite with serialWrite.  Adding isSoftSerialTransmitBufferEmpty to the serial API.  Adding serialSet/GetBaudRate to the serial API.  Since softSerial does not implement serialSetBaudRate some GPS serial initialisation code has been updated.

At this point it is probably possible to switch around all the ports and use a software serial implementation if desired.

By Dominic Clifton / https://github.com/hydra/baseflight/

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@423 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-10-01 00:07:44 +00:00
timecop@gmail.com 7c595e4110 started merging in generic servo handler 
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@422 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-30 23:42:44 +00:00
Dominic Clifton b92c3fa192 Replacing calls to isUartTransmitEmpty with isSoftSerialTransmitBufferEmpty. Replacing remaing calls to uartWrite with serialWrite. Adding isSoftSerialTransmitBufferEmpty to the serial API. Adding serialSet/GetBaudRate to the serial API. Since softSerial does not implement serialSetBaudRate some GPS serial initialisation code has been updated. 
At this point it is probably possible to switch around all the ports and use a software serial implementation if desired.
 2013-10-01 00:24:23 +01:00
Dominic Clifton 2ff881aa69 Renaming serialRead to softSerialRead. Adding serialRead to serial API and updating calls to uartRead and softSerialRead to use the serial API. Renamed uartPrint to serialPrint which now works on any serialPort implementation. 2013-09-30 23:30:12 +01:00
Dominic Clifton a6f6a5e28b Renaming isSerialAvailable to uartTotalBytesWaiting. Renaming serialAvailable to softSerialTotalBytesWaiting. Adding serialTotalBytesWaiting to serial API and updating calls to the former methods to use the serial API. 2013-09-30 23:05:53 +01:00
Dominic Clifton 97f54561f0 Replacing calls to serialWriteByte(softSerial_t*, char) with calls to serialWrite(serialPort_t*, char). This completes the proof of concept for polymorphic serial port implementations (uartPort and softSerialPort). 2013-09-30 20:29:10 +01:00
Dominic Clifton 6425877b2c First cut at polymorphic serial port implementation. Split serialPort_t into uartPort_t and serialPort_t. Calls to uartWrite() can now be replaced with calls to serialWrite(). 2013-09-30 20:13:24 +01:00
Dominic Clifton c950dbea09 Totally rework software serial to provide tx at the same 
time as rx using only one timer.
 2013-09-30 00:39:30 +01:00
timecop@gmail.com 2272e1a5a6 reorganization of uart-based receiver drivers 
FEATURE_SPEKTRUM has been removed and replaced with FEATURE_SERIALRX.
cli  option serialrx_type now configures what type of receiver it is
0 = spektrum1024, 1 = spektrum2048, 2 = sbus
sbus will need hardware inverter to use.
also cleaned up receiver drivers to assign readrawRC callback instead of assigning in code in main()
none of this has been tested.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@418 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-29 14:40:20 +00:00
timecop@gmail.com 04ab548d2e actually adding BMA280 driver files, oops. 
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@417 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-29 14:00:14 +00:00
timecop@gmail.com 01eaf85510 added ability to assign one of aux1..4 channels as RSSI by the-kenny 
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@416 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-29 13:58:25 +00:00
timecop@gmail.com 91d64fc6c1 removed retarded small_angles shit and replaced with proper calculation. 
no more small angles while shaking the board.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@415 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-29 13:10:58 +00:00
timecop@gmail.com 6763d8810b added test BMA280 driver 
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@414 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-29 12:53:02 +00:00
timecop@gmail.com c8f0fc78b3 removed references to avr optimizations we stopped using long time ago 
fixed heading calculation jump

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@413 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-22 04:03:18 +00:00
timecop@gmail.com 64e8f247bf oops. gyro only does NOT need getEstimatedAttitude. bad! 
ms5611 driver improvements (was failing below 20c)
merged some althold cleanups

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@411 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-21 11:18:15 +00:00
timecop@gmail.com 1ff4bcec5a Nice catch on gyro-only fly fail 
-robertb

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@410 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-21 07:57:28 +00:00
timecop@gmail.com 8a5157db46 disconnected magcal from core and put it all into hmc5883 driver. no need to keep track of it if driver does init by itself as well. 
moved annexcode into mw.c instead of imu.c
hopefully didn't break anything.
NOT FLIGHT TESTED.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@405 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-19 15:07:48 +00:00
timecop@gmail.com ac3cee7788 oops, this should be a bitfield 
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@404 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-19 11:26:30 +00:00
timecop@gmail.com 14893afb32 cleanup of sensor readings and sensor driver API reorganization part 1 
documented L3G4200D driver why 0x28 read was suddenly turning into 0xA8
removed old wiimotion averaging cruft from computeIMU
NOT FLIGHT TESTED

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@403 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-19 11:20:53 +00:00
timecop@gmail.com 6d3467c759 higer precision float radian angles are now used for acc and mag rotation 
no need to cripple the readings here

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@402 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-15 12:29:29 +00:00
timecop@gmail.com 26db228f79 merge in althold changes from github 
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@401 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-15 02:02:09 +00:00
timecop@gmail.com 71772f137b part 3 of the great sensor axis unfucking. careful flight testing may commence. 
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@400 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-15 01:56:23 +00:00
timecop@gmail.com 05ced4c784 fixing mag heading. DO NOT FLY! 
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@399 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-14 15:42:16 +00:00
timecop@gmail.com 44a671136b the great sensor orientation unfucking work in progress part 2. 
fixed MMA8452 orientation, as well as mag calculations.
gyro/mag is still reversed on Z, DO NOT FLY.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@398 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-14 15:35:44 +00:00
timecop@gmail.com 1cc306493b beginnings of the great sensor orientation unfucking. WORK IN PROGRESS DO NOT FLY. 
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@397 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-14 12:27:26 +00:00
timecop@gmail.com edb0ef01b7 fixed mag gain during testmode (thanks pm1) and added some explicit float definitions to mag test code. 
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@396 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-12 10:50:13 +00:00
dominicc1974@gmail.com 4c191270bf Changing all line endings to WINDOWS line endings (CR+LF) and removing all End-Of-Line whitespace and using spaces instead of tabs. Please ensure you configure your editors and tools to follow suit. If using git please enable autocrlf in your .git/config file. 
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@393 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-06 23:14:48 +00:00
timecop@gmail.com 929bbc8c3f added (untested) flag to disable tricopter servo updates when unarmed. 
tri_unarmed_servo to 1 (default) always updates tri servo whether armed or not.
tri_unarmed_servo to 0 will only send servo signal to tail servo when armed.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@392 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-09-06 00:03:32 +00:00
Dominic Clifton 5d13bc66ea Merge remote-tracking branch 'multiwii/upstream' 2013-09-01 00:54:00 +01:00
timecop@gmail.com 509e349e69 Whitespace/compiler warnings cleanups by Dominic Clifton; 
Slight tweak of new althold defaults
NOT-flight-tested .hex committing so people can commence with althold testing.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@391 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-08-31 01:40:13 +00:00
Dominic Clifton 1fdc6f118f Merge branch 'softserial' 2013-08-28 19:11:25 +01:00
Dominic Clifton 14d0f90278 Merge remote-tracking branch 'multiwii/upstream' 
Conflicts:
	src/board.h
 2013-08-28 19:11:18 +01:00
Dominic Clifton e29c0ccea6 Merge remote-tracking branch 'multiwii/upstream' into softserial 
Conflicts:
	src/drv_softserial.c
 2013-08-28 19:01:22 +01:00
timecop@gmail.com 77a241bd5f Software serial implementation. Compile with SOFTSERIAL_19200_LOOPBACK to test. Without the define the implementation will have no effect. Next step is to add a 'feature' to enable softserial and settings for the baud rate. Note, only READ is currently supported, write will come later. The highlevel api calls are used in main.c. Uart implementation needs cleanup to make serial port code generic, see uart files for details. 
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@390 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-08-28 01:26:10 +00:00
Dominic Clifton 4d00f51ddc Software serial implementation. Compile with SOFTSERIAL_19200_LOOPBACK to test. Without the define the implementation will have no effect. Next step is to add a 'feature' to enable softserial and settings for the baud rate. Note, only READ is currently supported, write will come later. The highlevel api calls are used in main.c. Uart implementation needs cleanup to make serial port code generic, see uart files for details. 2013-08-27 19:31:34 +01:00
timecop@gmail.com fa7eecac18 reload GPS pids on each eeprom read 
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@389 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
 2013-08-27 07:22:48 +00:00